Aquasure Harmony Series Installation: Whole House Water Softener Guide

Рет қаралды 171,200

Күн бұрын

Eliminate hard water problems with the Aquasure Harmony Series Whole House Water Softener! In this comprehensive installation guide, we show you the proper steps to install the Harmony Series Water Softener in your home, ensuring your entire family enjoys the benefits of soft water. The Aquasure Harmony Series prevents the wear and tear of limescale buildup in all water-dependent appliances while being gentler on hair and skin. With mineral-free softened water, soap and shampoos lather like they’re supposed to, leaving no filmy residue after washing. Softened water also enhances the cleanliness of laundry, keeping fabrics brighter, more vibrant, and longer lasting.
This video covers installation for all Harmony Series models: 36,000 Grains, 48,000 Grains, and 64,000 Grains. Follow our expert tips to achieve perfect soft water in your home.
Aquasure Whole House Water Softener is available at: aquasureusa.com/pages/water-s...
Learn more about Aquasure at: aquasureusa.com/
Don't forget to like, share, and subscribe for more helpful guides!
Time Stamps:
00:00 - Introduction to Aquasure Harmony Series Installation Guide
00:20 - Essential Tools and Preparation for Water Softener Installation
00:53 - Inspecting Aquasure System Components
01:00 - Ideal Placement and Power Requirements for Aquasure Water Softener
01:18 - Step 1: Shutting Off the Main Water Supply for Installation
01:41 - Step 2: Mounting the Aquasure Control Valve
02:59 - Step 3: Connecting the Aquasure Harmony Water Softener
04:08 - Step 4: Connecting the Brine Tank to Aquasure Softener
04:34 - Step 5: Powering On the Aquasure Control Valve
04:58 - Step 6: Flushing and Testing the Plumbing Lines
05:35 - Final Steps and Benefits of Aquasure Soft Water
-----------------------------------
🔔 Subscribe to Aquasure: / @aquasure
Never miss a deal again! Sign up for our newsletters! 👉 bit.ly/43bRPEX
Follow us on Instagram: / aquasureusa
Follow us on TikTok: / aquasureusa
Follow us on Pinterest: / aquasureusa
Like us on Facebook: / aquasureusa
-----------------------------------
#Aquasure #BestWaterSoftener #HomeImprovement #HardWaterSolution
Aquasure Harmony Series Installation: Whole House Water Softener Guide Video produced by Aquasureusa.com.

Пікірлер: 82

@onenikkione Жыл бұрын

Please read and consider the following before beginning the installation: 1. Purchase and plug in a "Surge Protector" in the electrical outlet you will be using for your new ($450 - $1200) water softener to protect it 2. Place "five gallons" of water in a CLEAN five-gallon bucket (you have one right? No, go get one or more b4 proceeding) also fill up the cat & dog bowls and other buckets you have cuz your water will be shut off for who know exactly how long and you might need the water to flush toilets. Also, if you don't have experience with plumbing and are going to install this yourself, consider having everyone in your family take a bath/shower before you begin and don't start the installation on a Sunday as many hardware/plumbing stores close early. 3. you can now perform the steps in the video

@kens962 Жыл бұрын

Very useful advice, saving some from being nagged at. I never thought about the surge protector until owning a home/paying for appliances.

@jermainejohnson3739 10 ай бұрын

How much would a plumber charge for an installation like this ball park estimate?

@kens962 10 ай бұрын

@@jermainejohnson3739 $500 in Vegas (20/20 Plumbing) Now that I know what it looks like, I'll DIY next time.

@vladpsychotrope3187 Жыл бұрын

You sir were awesome! No small talk, just needed info. Thank you!

@pattyschoals1163 2 жыл бұрын

Thank you! Figured it out today; could not find that in manual! I use military time quite often!

@moxnix 2 жыл бұрын

I like the way their unit hooks up to the water source and with their bypass value they have a better system than the Kenmore, Rheem and the A.O Smith units.

@onenikkione Жыл бұрын

agree, this is a much better connection going into the water softener

@raymondbaumann2405 6 ай бұрын

install went as easy as this video ......Thanks!

@dqdanielfab 3 ай бұрын

Having an issue screwing in the mount head into tank, I did not lubricate threads, seems like mount head not right size ? Did u have any issues ?

@tjmooney4181 11 ай бұрын

Thanks 👍

@jimw7043 5 ай бұрын

If you're going to put a bypass into the plumbing, do I still need to use the factory bypass valve. It looks like it comes apart so that I could just put the inlet/outlet npt fitting directly on. This would reduce my plumbing profile.

@nareshgolla Жыл бұрын

Does this require any additional plumbing stuff to be purchased?

@patriciacurrie7613 2 жыл бұрын

I live in an RV, can this be installed on the outside of it uses hoses instead of pipes?

@Kgoutdoor 2 жыл бұрын

What size are the pipes going in and put

@nl25c 18 күн бұрын

I would love to purchase one of these systems but I don't have a drain in my garage

@velascojidon390 2 жыл бұрын

Now the +uestion is how u run the water forbin and out of the softner?🤷

@sunlite9759 3 жыл бұрын

Good instructions. I wish there was more detail about installing the brime tank. What is the max distance between the tank and the WS?

@Aquasure 3 жыл бұрын

Thank you! Most of the components was preinstalled in the brine tank, so there's only a few things that the installer need to do for the brine tank. In terms of the max distance between the brine tank and the water softener, we don't recommend going over 10ft since the longer the distance of the tube, the more time it may need to draw the water during a system regeneration. We supply 5ft of brine tube by default.

@daviddobbins5136 2 жыл бұрын

Why doesn’t your website work? Trying to get to your homepage but it errors out every time?

@aRANDOMqUICKIEgunsandfun 2 жыл бұрын

I'm confused with the drain line. My loop has a copper drain line to connects to my laundry room on the other side of the garage so I bought a 1/2 to 1/2 shark bit connector but the inner diameter of the supplied drain line doesn't fit into the line support of the shark bite fitting. It's smaller than the support but removing the support the outer diameter is smaller than the fitting. Comparing it to some actual 1/2 pex I have lying around the supplied drain line is a bit smaller and the tubing I had lying around doesn't fit the control valve.

@BlumpkinSpiceLatte Жыл бұрын

Its 1/2" OD that they're talking about. 3/8" pex has 1/2" OD, that's what I used. 1/2" pex has 5/8" OD.

@Leonardoskitchens 9 ай бұрын

You didn't show how to connect the water supply lines ?

@cbatcba Жыл бұрын

I have an under the sink filter for cooking/drinking. After installing this system do I still need it? Thanks!

@onenikkione Жыл бұрын

have your water tested for "hardness", many places will do it for no charge or you can goole "water hardness map and enter your zip code. water softeners (like this one) remove the minerals that make water "hard", that test result will determine if you should consider a water softener.

@kens962 Жыл бұрын

If you plumbing is like mine, my plumbing company told me the softened water supply only go to bathrooms, kitchen sink, washer dryer, and water heater. You would still continue to periodically replace under sink filters.

@greggeis918 11 күн бұрын

What do you do if the riser tube is not flush with the top? Mine extends about 5/16” over the top.” As delivered.

@Aquasure 9 күн бұрын

Hi @greggeis918 We recommend contacting our support through email support@aquasureusa.com or over the phone at 1800-661-0680 during their normal business hours for system related issues.

@taylorboy57 2 жыл бұрын

Is the unit able to discharge water vertically? I have a drain line right above where I plan to put the unit but no floor drain nearby.

@ToddtheLoneDroner 2 жыл бұрын

How will it drain if it has to go up gravity goes down

@em_dee10 Жыл бұрын

@@ToddtheLoneDroner It's not gravity fed. The manual states you can run it overhead.

@paulawalker706 9 ай бұрын

Can it be installed outside of house in Texas? I had system installed outside, and want to replace it w Aquasure.

@Aquasure 9 ай бұрын

We don't recommend installing the system outside. If outside installation is a must, we recommend building a shed or provide necessary protection against the elements.

@fizzzle Жыл бұрын

Is it ok to drain into a sump pump or will the brine water rust the pump?

@Foodofthesoul Жыл бұрын

It won't hurt the pump, but it will kill any grass or flowers where it discharges outside.

@onenikkione Жыл бұрын

it might damage the pump, salt is very corrosive

@jje984 Жыл бұрын

Do yourself a favor and get one inch flex tubes for the inlet and outlet. I tried to do it with a screw on pex adaptor and no matter what I did it leaked. Teflon tape and pipe dope are no match for this connection for whatever reason. Had I started with a flex pipe I would have been done in an hour rather than the 3 freakin days I spent wrestling pex pipe on and off because it kept leaking. I'm stubborn but there's something about the thread taper and plastic material than makes it very hard to get a seal without a gasket to seat. I don't quite understand why they want 8 to 12 turns of teflon tape for a flex pipe. Maybe as a secondary failsafe if the gasket fails. But I'm here to tell you that tape isn't going to work though it may slow a leak. These threads don't mate well with teflon tape at all.

@onenikkione Жыл бұрын

Great tip

@noahholt482 11 ай бұрын

@@onenikkione yes it’s compression

@jimw7043 4 ай бұрын

Having the same problem here. Trying with Pex/brass adapter. Drip, drip, drip.. Too bad they don't just make a manifold option with pex connectors.

@darrylcoad7160 2 жыл бұрын

Flex connectors DO NOT require telflon tape! 🤣

@velascojidon390 2 жыл бұрын

The 3/4 supply lines has their own rubber gasket

@williamyeh6925 Жыл бұрын

Does the resin come with the system?

@BlumpkinSpiceLatte Жыл бұрын

Mine did

@pattyschoals1163 2 жыл бұрын

I can not find the time designation for AM or PM?

@Aquasure 2 жыл бұрын

The clock is set to military time which is a 24 hour clock. For setting an afternoon time, you will need to add 12 on the hour.

@GiveMeFaze1 Жыл бұрын

What about the damn sediment filter

@nopenope414 Жыл бұрын

what is the size of the stainless steel hose ?

@onenikkione Жыл бұрын

size to fit male 1 inch NPT

@michaelkaylor4779 2 жыл бұрын

Can the drain line be run overhead

@ToddtheLoneDroner 2 жыл бұрын

That would work when gravity starts to go the opposite way otherwise it's not gonna work

@BlumpkinSpiceLatte Жыл бұрын

Manual says yes it can.

@terrencesalvida9599 3 жыл бұрын

8-12 wraps on threads with a flex line with a gasket connection makes no sense.

@terrencesalvida9599 2 жыл бұрын

@Ben Seen if the gasket wears out the Teflon won’t stop a leak on the tube side where the gasket is

@MM-sq5pf 2 жыл бұрын

So why are you watching a how to video then???

@Foodofthesoul Жыл бұрын

Agreed 3-4 is plenty to ensure a good fit. that much Teflon is going to cause most people to cross thread it considering its plastic.

@5dc61 4 ай бұрын

Even worst, that much could cause the plastic to crack!!

@emilianogabriel9613 3 жыл бұрын

do we need to flush the bottle with water before installation

@Aquasure 2 жыл бұрын

You do not need to flush the resin tank with water before installation. However, we do recommend follow the system startup section of the owners manual before letting the water go into the system.

@Tyani-sz6cg Жыл бұрын

Anyone else having problems gettinf the bead basket in? I can insert it but the counterclockwise lock is fighting me, and im worried too much force will break rhe plastic

@raysmusic49 10 ай бұрын

I just did mine…just kept working at it and all of a sudden it worked.. good luck

@Tyani-sz6cg 10 ай бұрын

@@raysmusic49 according to the manufacturer, they had a problem with one of the molds. They sent me a new one and it went in perfectly the first time

@raysmusic49 10 ай бұрын

@@Tyani-sz6cg how is the softner working?

@Tyani-sz6cg 10 ай бұрын

@@raysmusic49 great! Been running flawlessly. No more hard water stains on dishes and clothes are a lot softer. Great system thus far.

@raysmusic49 10 ай бұрын

@@Tyani-sz6cg thanks!

@ToddtheLoneDroner Жыл бұрын

Why do they not mention you can use 1" PVC pipe

@BlumpkinSpiceLatte Жыл бұрын

Most people have copper or pex, rare to use PVC for supply. PVC and ABS are usually just DWV

@MaelFam 3 жыл бұрын

First!

@5dc61 4 ай бұрын

If you have questions after seeing this video, read the manual. If you still have questions, hire a professional plumber. Just my advice based on experience.

@akshaybhagdikar7054 Ай бұрын

Having hard time getting the basket to fit in. 😑

@Aquasure Ай бұрын

We are sorry that you are having issue with the installation. Please feel free to contact our customer support at support@aquasureusa.com or 1800-661-0680 during our normal business hours.

@rvvrn 3 жыл бұрын

Ummm, how about showing how to plumb it to a water supply line???? Wouldn't that be helpful??? Yea, I get it.....you don't want to take any responsibility since every situation may be different and you rather not go down that road.

@RLDoingAllSortsofStuff 3 жыл бұрын

@rvvrn ummm 3:25

@rvvrn 2 жыл бұрын

@@RLDoingAllSortsofStuff ummm NO. Screwing flex pipe to the actual softener isn't plumbing.

@chrismix30 2 жыл бұрын

I was wondering the same thing, I have a soft water loop pip. in my garage, looks like I need to cut it in order to connect the pipes?