WATCH THIS NEXT: SHOCKS TOO LONG?-kzfaq.info/get/bejne/oc2ci85oksDalH0.html

The springs were too stiff or long for my hyper 7 buggy, i put on rc8 springs to give me proper ride height. Really good shocks for the money, 16mm bore,4mm shaft, bleed cap, bladders, nice fit and finish. Only complaint is no hardware for the top. I made mine on a 3d printer.

They actually look like decent shocks for the price. The stock Granite shocks have a damper length of 102 mm and proline sells a set of front shocks and they are 101mm. The ZD front shocks are 120 mm in length. I guess the extra travel helps. IDK really but you have a video for shortening the shocks so I better check that out. 👍👍

Great video! It only took me 3 mins max to want to subscribe, and I only have an Arrma Voltage!! So many arrma channels, but none have done a clear and precise video with as much info as possible on diy shock work. Thanks man!

This is amazing. How did I not know about this?

I performed this upgrade along with the typhon a arms and noticed the cvd axles rub on the a arms due to the height increase. But I modded the shocks with spacers inside and lowered it about a 1/2 inch. I lost ground clearance but this thing is almost impossible to roll now and no longer pops wheelies when you gun it. It straight up launches now. No regrets.

😊 Thanks I'm in that Facebook Arrma Group too

Nice shock option for the 3s line! I have trackstar for mine, but they are always out of stock

LOVE IT! Thanks for posting 🤙

Great that I just fitted arrma 6s shocks on mine with them rubber grommets Worked a treat Cheers 👍

Yay a fellow Canadian thank you!!

Great video! Keep up the good work and you'll be a start in no time.

Ace hardware sells some small aluminum spacers that works great for the bottom of the aftermarket shocks

I need to widen mine. Its a monster of a truck for the money.Thanks for the idea looks great.

I use erasers as bushing in my shock towers it breaks in and it doesn't seem to damage the shock heads and it keeps a plush impact

I think they’re all the same or mostly but I took apart some Amazon OGRC granite shocks and was suprised to see a nice dampener with a nut on top as opposed to a dampener sandwiched with two e clips . Those are the absolute worst design imo , China junk on the Rlaarlo Omni has the e clips and they break all the time . Anyways for $30 some OGRC shocks are legit , big bore whatever they’re called . Totally fit the bill for my granite . The only other thing I’m adding is a center brace for the top and a globact alum steering thingy if I gets bad . Rubber or rings for the turnbuckles keeps em nice and non rattling . I seen dudes using m6 washers but the orange are defintely hands down better imho

Look good. I might try these on my big rock.

I tried these on my Typhon 3s after I shortened them considerably. One shaft bent and another one is leaking. I suppose they hold up about as well as the stock ones. But I've replaced three shocks in 1 1/2 years using them.

Man your how to videos are legit. Keep it up.

Those look nice, I am getting my first arrma typhon 3s this week, I know exactly where you are maybe I'll see you out there.

cool shocks and video,subbed

Great vid and cool looking shocks. You just got another subscriber Bro 👍

Ordering a set now👌 great video

The Granite 3s is a beast 👍🏾💪🏾💯

I have the same shocks in red thanks for telling me about bushes just ordered mine 👍

Nice video man 👍🏽

Thanks very helpful!

Nice!! I like the granite. Seems like a great truck!

I put 50 into my stock arrma granite shocks and that made a slight difference

I have some on my SC-8..Work good

Awesome video!!

Just bought these too!🇨🇦

thats awesome dude....fits perfect :)

work very good i have it nice video

Good video bro👍🏻👊🏻👊🏻👊🏻

My big like my friend 😎👍👍👍👍

You need stiffer springs; the shock oil won't impact ride height on an emulsion shock.

Can you use the shocks for the stock Granite

I can always count on you PhillyB_RC

So you mixed the new oil with the old " who knows what wt" oil? Not a good idea.

Hi fellow Canadian

Subscribed to fellow Canadian. I know exactly where you are running. Great place. I also kayak there. I bought the shocks also. Where did you get the bushings.

Great video mate. Do you think they would fit my rival mt10? What length are those? Thank you

what bushing used for top of shock

Cool video....my big rock shock rods just came off the rod end yesterday...bodged it so it's running again. These could be a nice alternative...it's been 3 months since you posted this...are they still performing?

Nice video

For someone who really doesn't jump the truck much,is there any benefit to the shocks as far as steering?,I honestly love the truck it has metal pivot pins throughout but the steering just lacks imo.everything I've read about servos doesn't seem to aide in the steering...I would like it a lot tighter and more responsive

Where'd you get the roof skid plate??

You mentioned you later shortened the shocks. How did you do that? Thx

Ill take it 😂 Yo! cool video man

@PhillyB_RC Have you had any issues with these leaking yet and if so what do you recommend to do to fix leaking? I have them on my big rock and 2 are leaking for sure, one in front and another in rear

You gain tons of height because you now have a full inch of down travel on the suspension vs before you had no down travel. If you preload the new shocks you will gain an inch of height.

Ty bro awesome

How do you feel about the 50 weight? I just got mine in and they all need oil. Shoot, one of them came completely empty because the seal inside was completely off!

Do u know any really really thought shocks for this truck as my shocks tend to break under some "light bashing" for me but everything else works fine

Slt, es ce que t'as laisser les amortisseurs de stock ou t'as changer les huiles ? Si oui , t'a mis combien ?

Very nice 👍😍👍 ~~~!!!!!!

Is these good for v2 because you have the version 3

Will these shocks work with the factory arms? Or do I have to install the Typhon arms?? Truck looks great. Can't wait to install my wing when it comes Wednesday! Thx and God bless!!

good video my new dear friend and like 40

does the extra length mess with any of the performance on the Granite?

Hi what’s the standard size of the shocks on front and rear please

How have these shocks held up 1yr later?

Hi, how you shortened these shocks? Thanks.

are they thin or normal m3 nuts?

How you finding these hold up? I find they're strong enough but suffer from leaking

Nice upgrade buddy, recommended oil for these?

Are those shocks are 1/8 scale or they have to be 1/10 scale

Link to the 3s Facebook group?

what did you break at the end?

how did you get the rubber you put in the hole of this cheap shock?

There 34.99 now on Amazon

I have a arrma voltage

does it work on the vorteks?

wing part number plz

They are $53 CAD now.... still worth it?

Hi,can you give me the lenght and diameter of thi ammo?thanks

not the same specs as stalk though??

These shocks went up to 56 bucks now i should have got them when they were cheap haha

Did you ever address the play in the front end you mentioned at kzfaq.info/get/bejne/fs-nqq-Tlt6WcoU.html ?

dang 28$ cdn?, i cant find them for less than 45$ on amazon.ca