Artillery Sidewinder X2 Unboxing & Assembly

Рет қаралды 20,906

Күн бұрын

Unboxing and step by step assembling Artillery Sidewinder X2 3D Printer
www.artillery3d.com/
/ artillery3d
/ 3dartillery
/ artillery3dofficial
00:00 - Intro
03:26 - Connecting Cables
04:00 - Assembling & Mounting Spool Holder (Note: Refer to other video if your spool holder is different)
06:13 - Removing belts and tapes
06:36 - Checking printer's power supply voltage
06:49 - Auto Bed Leveling process
09:49 - Loading Filament
11:03 - Start Printing

Пікірлер: 37

@clared5812 2 жыл бұрын

Thank you, this video helped me assemble my new printer 😅 it was pretty scary since it’s my first one ever! So it was nice to have a video help me along and make sure I was plugging in all the right things

@Artillery3D 2 жыл бұрын

Thank you for your support, we will try to do the best.

@diegovd7215 3 жыл бұрын

Quick Tip: when assembling the frame to the body: use two of the protective foams from the package, one to raise the body and the other to rest the frame on the side, so nothing gets scratched or broken :)

@Domieboy 2 жыл бұрын

lol did this too

@Dious 3 жыл бұрын

Very nice and quick installation 👍

@BjörnsTechnikEcke 2 жыл бұрын

I ordered it today and I'm really looking forward to it. Greetings from Germany ;)

@GaboJung77 2 жыл бұрын

Amazing video, thank you so much

@NunoFlyer 3 жыл бұрын

Awesome!

@VitalikHobbies 3 жыл бұрын

So cool

@kroke1 2 жыл бұрын

I look forward to these printers. But this music for the video doesn't work at all 😵 too restless. But mega cool printer and soon it will arrive at my place! 🤩 Happy printing smelt folks!

@TECHMAKERNEWS 3 жыл бұрын

Excelent...

@Robin-Visser 3 жыл бұрын

very smart to have the usb ports facing up. Do they accepts all sorts of filament particles?

@kavenci 3 жыл бұрын

never been an issue for me but you can print a cover if your really bothered by it…

@Markusx26 3 жыл бұрын

Materialverträglichkeit: PLA, PETG, TPU laut Manual

@BC5391 Жыл бұрын

mine does not have the arrows to adjust the Z axis

@crepixhd1 2 жыл бұрын

I literaly spent hours of leveling that printer... First of all I got an outdatet handbook (without that start gcode). Then my BLTouch was damaged, I got a new one. But the handbook has the wrong order for leveling? You just did the z=0 before the autoleveling - in the handbook it's a completly different order. Also my bed is maybe defect because I have to print 1st layer with 220 and 70 degrees celcius otherwise the print doesn't hold. I have so many problems with that printer... :(

@adriangrimaldo2138 2 жыл бұрын

I just got in the mail. It was missing the two chrome bars ;(. My question is about the calibration for when I get there. If we put a pad on top to help break the molds, should we calibrate the machine with that on top instead of the piece of paper?

@Artillery3D 2 жыл бұрын

Hello, friend, the new spool holder doesn't have a chrome bar now.

@Artillery3D 2 жыл бұрын

Please also check "Artillery 3D Printer Leveling Tutorial", it have more details.

@adriangrimaldo2138 2 жыл бұрын

@@Artillery3D Why did I see some people torque the bottom? Is this why the bed moved so easily after unboxing?😎

@beebees3d 3 жыл бұрын

Is this a production unit?

@clarkg.s.256 Жыл бұрын

what was the one connector for at the bottom right?

@Artillery3D Жыл бұрын

Hi, a cable for Z endstop is preserved in case customer want to go old-school. (No Z endstop sensor comes with the machine, customer can install any kind of sensor in case they wanted to.)

@smoke264 Жыл бұрын

Where is the other video referenced on the instructions please? I have the version that has no metal tubes for the spool holder

@malfunction7077 Жыл бұрын

Hey did you ever find that video I have the same version as you and I can't find it

@stevenrailey9204 2 жыл бұрын

Mine did not come with the mettle brace for the rollers. It came with bearings installed. Was that a new update?

@Artillery3D 2 жыл бұрын

Hello, friend, yes.

@stevenrailey9204 2 жыл бұрын

@@Artillery3D so the part at 4:09 is different assembly correct?

@Markusx26 3 жыл бұрын

Look in the description because the printer is not suited for ABS Prints depending to the manual: Materialverträglichkeit: PLA, PETG, TPU

@tomaszwota1465 2 жыл бұрын

Isn't it just because you need an all metal aftermarket part?

@Joeyfordayz2301 2 жыл бұрын

Question to everyone. My printer Will not stop pressing down and make a loud buzzing sound when I try to level the bed. The probe doesn’t even come out. The extruder will just push down and it’s a scary thing for me. I am new to 3D printing so can anyone please help me

@brunoxxx1230 2 жыл бұрын

i had the same problem after the assembly. Remove the plug from the bltouch sensor hidden by the plastic and reconnect it. It worked for me

@Joeyfordayz2301 2 жыл бұрын

@@brunoxxx1230 forget it, it was just an incorrect reading on the main cable connecter the one where the frame connects to the base

@Ben-pi8nd 2 жыл бұрын

The Auto Level Sensor is CRAP by mine X2

@michalp.4975 2 жыл бұрын

Turn off the music FFS

@tinokap 7 ай бұрын

next time show more upward, so easier to figure out how the fuck you put all back in box with these 6 different shaoed removeable cushions, random cardboard piece etc..