The WORST Socket Wiring I Have EVER Seen!

Рет қаралды 120,394

Күн бұрын

This must be one of the WORST socket wirings I have EVER seen😱! In the latest Artisan video, we see Jordan, Lee and Reuben carry out an EICR and fault find and we end up finding some shocking discoveries throughout the video.😬 So make sure you like and subscribe and enjoy the video!👍
Worried about your electrics? You can get a quote from Artisan Electrics to do an EICR for you here: forms.openquote.net/company/a...
Quick thing! Make sure to check out Tradify in the link below where It's completely free to trial for 14 days with no credit card details needed, and if you like what you see, you can grab a fantastic 50% off for your first three months using our code “ARTISAN” 🎉.
Tradify Job Management Software: bit.ly/45EppVP
Help your customers save energy with Tado - bit.ly/453kmwU
🧰🛠️ Tool Of The Day 👇
BODDINGTONS ELECTRICAL JM1035 - bit.ly/3PuwMrF
🚨Subscribe to our KZfaq Channel for more great electrical content: kzfaq.info...
➕Get more from Artisan Electrics here!👇
linktr.ee/artisanelectrics
🔋Use my referral link to purchase a Tesla product and get free credits you can redeem for awards like Supercharging miles, merchandise and accessories.
ts.la/andrew24855
💬Artisan Electric Discord - Join our Electrical Community! 👇
/ discord
🔔 Become a Channel Member To Get Access To Exclusive Perks 👇
➤ / @artisanelectrics
Electricians Business Course
📩 Sign Up To The Electricians Business Course Here And Get The First 4 Lessons Free 👉 ➤ bit.ly/2Z582zI
🔔 Subscribe to TOOLS4SPARKS KZfaq Channel 👇
We Also Have A Dedicated KZfaq Channel About Tools:
➤ / tools4sparks
⏱️Timestamps
00:00 - Introduction
02:23 - Neat or not neat
05:15 - Jordans wisdom
08:36 - Sponsor time
12:18 - Master testing the Apprentice
14:01 - SHOCKING DISCOVERY
15:14 - Tradify
17:05 - Time to test
19:04 - Finding a cave of wonders
23:30 - Finding an issue
28:00 - TOOL OF THE DAY
PARTNERS/ARTISAN CODES
🔦Unilite Work Lights: Get 25% off all Unilite Products using our code "ARTISAN25"
UK Store - bit.ly/UNILITE
Europe Store - bit.ly/UNILITE-EU
USA Store - bit.ly/UNILITE-NA
Australia Store - bit.ly/UNILITE-AUS
💪🏼Powered by Hilti Nuron - hilti.to/nuron_range
🕶 SafeStyle Protective Eyewear - bit.ly/3Svl4xG-SafeStyle Use code 'AELECTRICS10' for 10% off
💳American Express Business Gold Card
Sign up for an AE Business Gold Card using the following link to get a bulk of FREE membership rewards points - bit.ly/3JDmXVG
🥾 Big Boots - Save 5% on our amazing work boots when you use our discount code "ARTISAN" at checkout here bit.ly/BIGBOOTS
📚 Get 10% off when you use our discount code "Artisan" at checkout Here - bit.ly/3uY94dW-StudyStickers
🔋 Save 5% on EcoFlow Products using code 'AE5' - dada.link/58lAne
🎵 Use music the Artisan Way - Sign up to Epicmedic Sound here 👇🏼
www.epidemicsound.com/referra...
TRADES INSURANCE DISCOUNT
🦏 Use Discount Code “ART5” and you get a 5% Extra Discount On Their Already Excellent Prices.
➤ www.rhinotradeinsurance.com/quote 📞 or call 01162437904.
ENERGY PROVIDER
🐙 Get £50 credit when you switch to Octopus Energy 👇
➤ share.octopus.energy/zappy-sh...
📈Make the most of your KZfaq analytics with TubeBuddy - Sign up here👇
➤www.tubebuddy.com/ARTISAN
AMAZON LINKS
✅ Check Out All Our Favourite Tools Here 👇
➤ www.amazon.co.uk/shop/artisan...
🏷️ DISCOUNT BUSINESS SUPPLIES 👇
➤ www.amazon.co.uk/tryAB?tag=ar...
📱 ARTISAN SOCIALS 📱
💬 Artisan Electrics Discord
➤ / discord
📸 Artisan Electrics Instagram Account 👇
➤ / artisanelectrics
🐦 Artisan Electrics Twitter Account 👇
➤ / artelectrics
📓 Artisan Electrics Facebook Account 👇
➤ / artisanelectrics
⏰ Artisan Electrics TikTok Account
➤ / artisanelectrics
💼 Artisan Electrics Linkedin
➤ / artisan-electrics
🎥 Get in touch with the Media Team
➤media@artisanelectrics.co.uk
This video is for entertainment purposes only please do not attempt to copy or recreate it. Do so at your own risk.
#electricianlife #artisanelectrics

Пікірлер: 307

@artisanelectrics 8 ай бұрын

Tradify Job Management Software: bit.ly/45EppVP Help your customers save energy with Tado - bit.ly/453kmwU

@dennis8196 8 ай бұрын

I've been working for a small firm this week and they have done the latrene twinning thing. It's a small thing for us with our luxury of running clean water and flushing loos, for the people of many developing countries luxury starts as soon as they put walls around the hole in the ground. A few quid to make the lives of less well off people cleaner and more comfortable.

@MrZombieUK 4 ай бұрын

How did i find this channel and realise that it's 2am and I'm STILL watching your videos.... damn you for making them so good 😂

@tazzy3469 8 ай бұрын

So many comments about the telephone.... simply because it is an analogue phone and will work without power... most people have cordless now, but it's always good to have an emergency phone that will work in a power cut.... simples

@quantumleap359 8 ай бұрын

Jordan, your videos are very instructional, nicely edited and above all, fun to watch. Cheers mate, you are doing a great job!

@fattoamanowoodwork3638 8 ай бұрын

Another great video guys, loved it. Really great to see all the procedures with detailed explanations. Great

@simonmccaughey2075 8 ай бұрын

Just want to say it would be an absolute privilege to get to work with you and your company. Never seen anyone working so meticulously. Just wish I was 16 again and living across in England. Would sign up for an apprenticeship with your company immediately. Where was KZfaq over 20 years ago, with people like yourself making videos, to show recluse country folk like myself, that a career actually does exist! 😂

@dave-d 8 ай бұрын

6:06 New procedure: Check for current on main bonding conductor with clamp meter before disconnection. Possibility of diverted neutral current. Oh what fun! Play safe.

@blower1 8 ай бұрын

It's lovely when earth is no longer earth isn't it - efixx just had a piece on this in their news about the sheer number of PEN faults the DNO's are getting nowadays.

@chrisholt2474 8 ай бұрын

Sometimes I don’t know how you lads know where to start, to decipher some electrical installations, well done. 👍👍👍

@artisanelectrics 8 ай бұрын

Thanks 👍

@cuebj 6 ай бұрын

They often sound like me and my immediate colleagues in my last job before retirement. We were mining social care and other local authority data systems - all deep legacy, catered for many years of changing regulations, way out of date, data entry often by social workers. We put ourselves into the minds and and messy office situations of the system users, the developers who had to modify the systems to allow data entry of new regulatory practices, the IT department who always lied about everything, and, hey presto, we found issues that mere rote data mining and reporting tool development would never have identified. Undergirding all that, we all lived in the area and had neighbours, friends, relatives who depended on good social care, enforcement and safety, planning, and building control so we pushed hard for robust quality. The last few years were depressing - senior management changed and, with it, the ethics changed totally. Glad I took early retirement.

@stefanovanenio 8 ай бұрын

Great video, love watching the testing side of things too.

@artisanelectrics 8 ай бұрын

Glad you enjoyed it!

@AngelaPeters-fy1tc 8 ай бұрын

Absolute fantastic video showing and thoroughly explaining some of the testing involved. IB < or equal to IN is only a fraction of the start of max demand formula i try my best to keep lodged in my small brain and it really helps when trying to figure out if existing circuit breaker is adequate when upgrading an electric shower. Thankyou and keep up the excellent work Artisans of MONTE Cambridge.

@gadget8081 8 ай бұрын

Another great video respect to you and your team. I really enjoy your videos.

@TrainDriverRob 4 ай бұрын

Excellent as always and even better thinking about the swifts!

@derryhamilton9175 8 ай бұрын

Rather than trying to memorise the factors for each set, which I never can; in that case, r2= r1 x (2.5/1.5) so just plug in the sizes written on the cable and it's works out the same.

@chrisyoung7362 8 ай бұрын

Holy sheet it does 😂😂 I'm sure that was taught in college but always just remember each set and now I can forget them 😅

@seanmoorey8739 6 ай бұрын

absolutely fascinating, love it

@boriss.861 8 ай бұрын

18:35 LOL you looking at that MK plug and saying it's old. Bakelite and threaded screw-posts where the conductor wraps around the post that is getting old...

@Chris_In_Texas 8 ай бұрын

Its amazing that you can't have a regular outlet in the bathroom, but you can have a 9KW electric device in the shower with the person is perfectly fine and only an RCD with up to 30mA of current before it trips. 😲☠

@MattF340 8 ай бұрын

The difference is the shower is a permanently installed device, designed and waterproofed for that location. If you were allowed a regular outlet in the bathroom people would plug in all kinds of devices with the potential for them to fall in the bath or get wet potentially making them live.

@SwitchedOnNetwork 8 ай бұрын

@MattF340 But for some reason you're allowed outlets right next to your kitchen sink. I guess you don't fully immerse yourself in the water when doing the washing up, but still... 😂

@foogod4237 7 ай бұрын

@@SwitchedOnNetwork Are RCDs/GFCIs not required for kitchen outlets where you live? It's a code requirement everywhere in the US (basically for anywhere that's considered a "wet area", which both kitchens and bathrooms are), so I assumed it was in the UK/Europe/etc too...

@paulhill1665 7 ай бұрын

Misconception regarding sockets in a UK bathroom, it is allowed, but has to be a minimum of 3M from any water source, very few UK bathrooms are big enough to allow that.

@davidcantona1774 8 ай бұрын

Top Tip! Always keep a garden trowel in your meter cupboard just in case there’s an electrical emergency

@sedontane 8 ай бұрын

I think the top tip, is always tip your tradesmen, and chocolates are a great way to do that.

@wotireckon 3 ай бұрын

Also, a small garden fork is very useful for R1 + R2 and ring continuity testing etc

@iainkay3630 8 ай бұрын

Tado is excellent indeed. User for 7 years and I am happy I got in before the subscription fees :p

@christopherhall5525 8 ай бұрын

Been a while since I was a spark but I was always on the line that a bond has to be continuous so if connected in multiple places (like multiple services) then it had to be stripped and looped as one cable, not cut and extended. As such you would then not be able to continue to use that to come off that water bond (if it had one) anyway?

@stephengreene3134 8 ай бұрын

Haha love hearing all the British-isims when you guys refer to some of the bad wireing. 😂😂😂 Love watching your videos from the US

@don1estelle 8 ай бұрын

jorden I knew an old electrician who wired multi lamp ceiling fitting in bell wire! current CSA but poor insolation, he could not work out why it would blow occasionally

@TrickyTree84 8 ай бұрын

Bounty for the win 👍🏻

@andrewboothman6363 8 ай бұрын

Bounties for the win!

@aidandillon9520 8 ай бұрын

Great video. Bounty!

@artisanelectrics 8 ай бұрын

Glad you enjoyed the video

@goober-ll1wx 8 ай бұрын

Also, a fun fact, Jordan mentions AC currents causing screw terminals to come loose over time. This is primarily caused by something called Magnetostriction. As the AC current induces a magnetic field in the terminals this causes the metal to change shape. This effect can be so large that you can even hear it, if you have ever been close to a substation or large transformer inside a building's HV room you can literally feel the hum coming from the iron core!

@RichardKeightley-ky6fx 8 ай бұрын

Magnetostriciton is only found in transformers and the like with ferrous cores. It wouldn't occur with brass screw terminals where there is no wound core

@goober-ll1wx 8 ай бұрын

@@RichardKeightley-ky6fx incorrect, brass is still subject to magnetostriction, but Brass has minimal magnetostrictive effects due to its non-magnetic properties, its just more pronounced in ferrous metals.

@RichardKeightley-ky6fx 8 ай бұрын

The heat/cool cycle (expansion/contraction) in the conductors/terminals will have a greater effect on the terminal tightness than any potential negligible magnetic influence

@foogod4237 7 ай бұрын

Yeah, while magnetostriction is theoretically possible in copper conductors, you would need a _lot_ higher current than this for it to have any detectable effect (I'd guess tens of thousands, if not hundreds of thousands of amps). It almost certainly is not actually a factor in these sorts of applications. This is far more likely due to simple vibration from magnetic inductive effects with other nearby conductors. Current flowing through the wire will generate a magnetic field which causes corresponding electric currents in other nearby wires or metal pieces, which in turn create their own magnetic fields which repel those created in the wire. When the current direction changes, the new magnetic fields in the wire are then _attracted_ to the established magnetic fields from the other conductors (pulling the wire towards them), until they exhaust them and set up opposite currents in the surrounding metal, which produce opposing fields (and push it away) again, and the process repeats. (This is also why many smaller (non-substation) transformers often hum or buzz, too. It's actually not the core changing shape, it's just the wires in the coil vibrating as they're pulled and pushed away from each other (and the core) by the magnetic fields.)

@ollie9397 8 ай бұрын

This is interesting and slightly worrying. I am thinking of having a solar and battery ststem put in, is it mandatory to have this type of inspection done by the installers?

@DarcAngel77 8 ай бұрын

I tell you Ruben is an asset and credit to the company.

@Jonnyturboable 4 ай бұрын

Really?? 🤨

@puritan7473 8 ай бұрын

100% agree, Bounties are disgusting!

@sergiofernandez3725 8 ай бұрын

You should use a clamp meter on the tails and the DNO earth before you disconnect from MET. This helps check for diverted neutral. John Ward explains this in a few KZfaq videos

@bramcoteelectrical1088 8 ай бұрын

Theres a picture online showing 80amps 😂 flowing thru the earth so diverted netrual are out there.. Was on a electrical forum

@iainkay3630 8 ай бұрын

It seems the diverted neutral phenomenon is almost guaranteed where you have a PME system with metal incoming pipes - at least in theory. Definitely an eye opening JW video.

@stevejagger8602 8 ай бұрын

Looking at John Ward's recent video does on Diverted Neutral Current it is important to check for DNC before disconnecting the main earth connection. Disconnection of the MET could result in in exposing an unintentionally live conductor - the main earth - which is carrying the neutral return current from neighbouring property or properties.

@bramcoteelectrical1088 8 ай бұрын

@@stevejagger8602 it's not major common but as cables age this sort of problem will only increase. I have seen it only once in 16yrs myself

@timellison2703 8 ай бұрын

Skillz 👍

@shadow-Sun Ай бұрын

Nice to see a professional at work , sometimes it seems like we live in Texas in the UK with the number of cowboys masquerading as tradesman out there !

@AndrewLumsden 8 ай бұрын

At 22:57 That melted 2 way adapter with the WG logo was only ever available from Woolworths, so that will give you an idea of its age! I still have at least one but still in perfect condition.

@marymadigan9707 8 ай бұрын

Nice one guys 🇨🇮😎

@roydowling2542 8 ай бұрын

Ivory coast

@glennk44 8 ай бұрын

main isolator cover on upside down... very sad sight haha

@david29262 8 ай бұрын

Ive read a few comments about the tails. One being code 2 and other bring code 3. So i would look at it like this they have 100amp max incoming but what do they have that could max it out. Modern oven 20amps max electric shower 20amps ish. That still leaves a large amount. Depends on load. If realistically could reach 100amp code 2. If very unlikely to exceed 80amp code 3

@jensschroder8214 8 ай бұрын

3:51 A telephone in the power distribution. 16 mm2 can handle around 60 to a maximum of 85 amps.

@blower1 8 ай бұрын

Those pull cord shower isolators usually have loose connections when you go to check them - I don't think it's so much the tiny vibration from the 50hz sine wave, it's more to do with the pull cord itself - pulling at the fitting on the ceiling, loosening it and then it pulling on the wires. Combine that with condensation/steam from it being on the ceiling in a bathroom with a shower, and you get green copper corrosion on the wires and terminals, increasing contact resistance, heating up the terminals / wire and the resulting thermal cycles also loosen the connections. I hate the things tbh, they always end up with burnt wires (usually neutral) & corroded connections. Much better to have a switch isolator on the wall outside the bathroom.

@MattF340 8 ай бұрын

Just had that done on our new shower, we got through 3 pull isolators in 10 years, switch outside much better.

@ChrisBoehmvideos 8 ай бұрын

Tado is great but does not support multiple properties. So you have to sign in and out to switch between properties. Great video guys! Also don't shame the bounty bars, they are the best...

@nicolaimortensen9651 8 ай бұрын

In denmark if the RCD(30mA) is below 15mA its a fail. but 19 is ok, but a bit low :)

@brendonburgin5250 8 ай бұрын

Just a quick question from a New Zealander will England move away from the ring circuit to the radial one like down here?

@Matt-td9wx 8 ай бұрын

Some people do wire radials it’s just preference

@bramcoteelectrical1088 8 ай бұрын

😊radials are great in 4mm b32 mcbs... but have to be careful of derating if theres 100mm of insulation then you need to look towards a b20 radial possible calculation required but it catches people out

@MicraHakkinen 8 ай бұрын

Bounty is the best snack!

@wianvanzyl7943 8 ай бұрын

Will you be able to do an in-depth video on the tools you are using?

@artisanelectrics 8 ай бұрын

We can definitely plan a video where we look at all the tools we use

@VintageProjectDE 8 ай бұрын

@@artisanelectrics It'd be really nice to maybe have it a series between your test equipment, hand tools, and power tools. The range of tools you're showing is stunning! Many electricians I know come with a screwdriver, a pencil, and a borrowed notepad. 😁

@tokalaser 8 ай бұрын

Bountys for the win!

@richardjackson2560 6 ай бұрын

Should the cable in the summer house be put into some form of conduit? Am I right in thinking that there is the potential for the cable to break down from light exposure.....

@grahamarnold2591 8 ай бұрын

Got to be a TOPIC, the best choc bar going

@artisanelectrics 8 ай бұрын

Not a bad choice at all

@MrZombieUK 4 ай бұрын

Mars bars! No contest!

@jonathanbuzzard1376 8 ай бұрын

I would have thought any care home worth its salt would require all equipment brought in by residents to be PAT tested. That lamp fails on visual inspection, you don't even need to get the tester out. The reason for arc fault detectors in care homes is that a fire has potentially worse outcomes. Imagine trying to evacuate a large number of people with limited mobility from the property. Hence anything that might reduce the need to do that is worth it.

@imark7777777 8 ай бұрын

Well I guess that highly depends on the AFDD and whether they have the current firmware updates and what are the current firmware updates have the updates for that particular pattern. And whether the manufacturer actually makes them to actually work. Washing this video after the DSS one.

@FluxLabsProjects 8 ай бұрын

Back in the day i remember it was quite common to find tablelamps wired in something similar to bell wire. I think it might have been acceptable at some point, but not anymore.

@paulf2529 8 ай бұрын

Frequently seen at antique auctions!

@frimleyfrodo 8 ай бұрын

It was acceptable - it was called lamp flex! I can’t believe Jordan hadn’t seen it before. Because it wasn’t colour coded, you could end up with the inline switch in the neutral instead of the line conductor. Fitted with a lovely old MK Safety Plug - the king of plug tops from days gone by.

@foogod4237 7 ай бұрын

@@frimleyfrodo That cord was definitely not using "lamp flex". Two-wire lamp cord has much thicker insulation and is actually rated for mains voltages. Bell wire is typically only rated for low-voltage use, and should definitely not be used for this sort of thing. You could easily get insulation breakdown within the wire leading to arcing and a fire, just because you somehow pinched it the wrong way, or it got old, or too warm, or you looked at it funny, or...

@neil6438 7 ай бұрын

Can the oil service pipe be touched when it enters the equipotential zone ? that will determine whether or not a main protective bond is required.

@AhamedRasel-eq7km 4 ай бұрын

So nice bro

@beachcomberbob3496 8 ай бұрын

Snazzy meter there! My old Megger back in the 70s was a wind up affair.

@inothome 8 ай бұрын

That's a good one... the AC loosens connections because it's oscillating. lol Who ever told someone that? Yes, connections do get lose over time, sometimes due to the heat cycling or the wire cold flowing, but from the "vibrations" of AC??? That's a good one, is that on the master test too? lol I hope that was a joke.

@bramcoteelectrical1088 8 ай бұрын

This may be a cause but at very high amperage into 1000amps 😊. More likely in domestic thermal.effects

@scherry5135 8 ай бұрын

Completely agree, worked on industrial systems upto a couple of thousand amps and connections not coming loose all the time. If this was the case we would have streets of houses burning down because of bad connections and no checking for 10 years. The worrying thing is some people on here believe this. Not sure what I think of this YT channel now. I started watching some of the videos and found it quite interesting but the ' worst ever this and that' is turning me off. Some of the claims and info is simply opinion and some far too pedantic. Sometimes I think drama is added just to make a video, which is probably a better earner than the work now - shame really,

@inothome 8 ай бұрын

@@scherry5135 Yeah, I almost turned off the video when he said that. I was like is this for real? But when tech channels start making content, just to make content quality always goes down. Not saying that's what's going on here. Yet.

@Random-name393 8 ай бұрын

Bounty. The king of snacks 👀

@steveb1856 8 ай бұрын

Coolest Tradify plug yet?!

@artisanelectrics 8 ай бұрын

Quite possibly 👍

@totherarf 8 ай бұрын

OK Artisans, I have a (genuine) question. How do you tell what the incoming supply type is? How do you work out what the Ze should be below? To be honest sometimes the only way I can tell is to take the neutral cover off the cut out! But normally you are not allowed to touch the DNO's kit. Fortunately for me, I am employed by a DNO so taking a look is not a problem, but the number of "High earth" jobs I get that are just misidentified as TNCS is quite large (especially with council sparks)! So ........ How do you do it?

@simonmiddleton4977 8 ай бұрын

Looks like a really easy and handy tool to have. Great video as always 😃👍

@stephenwelham 8 ай бұрын

Have you ever found a 6” nail for a main fuse on an industrial job I have

@paulstubbing1420 5 ай бұрын

Have found something like No 12 gauge copper wire in 30 amp Pocelain Fuse plug on main switchboard as Incoming line Isolator before meter and the carrier corner chipped off exposing the wire grip

@RVSparky 8 ай бұрын

The scaffolding. Do you hire that out? Is that another co that comes in and does that?

@artisanelectrics 8 ай бұрын

Yes another company come and does it for us

@simonbarnard1861 8 ай бұрын

Dark chocolate bounty is #1

@paullongley1221 8 ай бұрын

The plumber must’ve been out of it when they installed that nest of pipes, how did they think anyone would get to the pump at the back 🤪🤪

@artisanelectrics 8 ай бұрын

No idea

@johndododoe1411 8 ай бұрын

Simple question: In the UK, would a steel beam cross section 1x2 feet rammed into the ground and extended through the building count as an extraneous object need bonding . I'm not i the UK, just professionallu curious .

@southseaelectrics6236 8 ай бұрын

I’d only code the 16mm tails if the installation would be likely to pull more than 84a which is the maximum current carrying capacity of 16mm tails.

@jontemple1038 8 ай бұрын

Gotta be a PLAIN chocolate Bounty.....!!!

@TradifyHQ 8 ай бұрын

At least your invoicing won't be as complicated with Tradify...😉

@artisanelectrics 8 ай бұрын

Agreed 👏

@simonharding1572 8 ай бұрын

m&m’s out of them are the best

@bobturner3645 8 ай бұрын

I like all the snacks 😂

@artisanelectrics 8 ай бұрын

Fair enough

@alanwalton5735 8 ай бұрын

You didn't turn off the breakers after you turned off the main isolator on the board did you?

@blower1 8 ай бұрын

I've been guilty of that myself....old habits die hard.

@bramcoteelectrical1088 8 ай бұрын

😂all is sparkies do it as habit 😮

@mrbigsausage6918 4 ай бұрын

Bounty King here, even better refrigerated mmmmmm nom nom nom 😁

@andrewjames3908 6 ай бұрын

Seeing that 3 phase head can I ask a question about them please. the 3 phases are rated 100A each but is the neutral only rated 100A as well meaning you couldnt pull 300A in total if you were using it a 3 single phase supplies?

@de03ley 5 ай бұрын

check the DNO incomer cable type.. will answer your question

@juberuddin7098 8 ай бұрын

Smart meter engineers can’t upgrade customer side takes when installing meters , that install is the correct way of doing it

@blower1 8 ай бұрын

Yep, most they will do is run new tails to one side of the isolator - assuming there is one.

@tonywatson1412 8 ай бұрын

The line and cpc twisted together....seen that somewhere else on the net...was to do with unidentified cables/ circuts...think to ensure would cause a deliberet fault. .cant remember all the detail on it ..?

@sinista.productions 8 ай бұрын

That’s exactly what it is, it’s so it would trip if it inadvertently became live and not just sit there live and exposed. We do a similar thing on the distribution network in a few circumstances.

@truefoa 8 ай бұрын

Quote of the day 'TRADIFY, is really useful, especially when you wake up late'. 😊

@artisanelectrics 8 ай бұрын

👍👍

@daviddunn4638 8 ай бұрын

If Reuben doesn’t want the bounty I’ll have it 😂😂😂😂

@leona_devon 8 ай бұрын

anyone else spotted the old skol phone on the electric cupboard ;) I agree that the king of snacks is bounty!

@Mayurpaj 8 ай бұрын

For me any of them other than bounty are great. But bounty does divide my household. So they are preferred heavily by some.

@nigel4425 8 ай бұрын

Plain Chocolate Bounty... Food of the Gods!

@artisanelectrics 8 ай бұрын

100%

@Spark101. 8 ай бұрын

Undersized meter tails (in relation to the main fuse): if no thermal damage, and the calculated max load is below the rating of the tails…..I’d code 3 it with.

@bramcoteelectrical1088 8 ай бұрын

Bang on money C3 not compliant but if fuse say 60 amp or so to match conductor size it fine. C2 if undersized in relation to cutout fuse😊

@billsbasementworkshop1902 8 ай бұрын

Hi Jordan. 19ms is a little low for an RCD I think. It could cause intermitent tripping. I usually look for them to be 21 or higher to be ok.

@artisanelectrics 8 ай бұрын

Thanks for the info 👍

@bramcoteelectrical1088 8 ай бұрын

See regular 18ms rcd times. More about having an rcd tripping at a lower test current and causing nuisance tripping😊. Ramp tests are always useful tests to conduct and and also before doing a rcd test switch it on and off a few times😮

@discomonkey3492 8 ай бұрын

What's the telephone for in the mains cupboard? Bat phone perhaps 😂

@artisanelectrics 8 ай бұрын

😂😂

@blower1 8 ай бұрын

Who ya gonna call?......the meter company apparently.

@bramcoteelectrical1088 8 ай бұрын

it's the Artisan biscuit and cuppa tea line...shhhh 😊

@dmarriott9701 8 ай бұрын

Anyone not wanting their Bounty I’m available to take delivery. Definitely King of the chocolate bars.

@danielson101 6 ай бұрын

Canada here, a ring circuit is that like xmas lights if one burns out they all go out?

@triax7006 6 ай бұрын

No because the last socket wired then goes back to consumer unit. The idea is that the electricity & of course the amps are shared from 2 directions so that it is more evenly applied to the things attached to them. Think of it like radiators that come from the boiler & then feed back into the boiler to make a circuit, however of course that only goes in one direction whereas a ring circuit supplies in 2 directions.

@Rs500ybd 7 ай бұрын

Bounty Out of the Fridge ... Everyone Loves a Bounty.

@hogthrob 8 ай бұрын

A couple of questions, if I may ... When you were calculating the current draw for the shower, you used 230V. I believe the lower mains voltage supply tolerance level in the UK is 216V, so is there a reason you didn't use that figure? Was it just to keep things simple for the video? Is there was a voltage drop between the circuit breaker and the shower, would that cause the shower to draw more current? How did we end up using Watts for AC systems, instead of Volt-Amperes? Do you ever use VA?

@mikebarry229 8 ай бұрын

I'm not an electrician but with a resistive load like a shower I imagine the rating of 9000w will be based on its design voltage. Fluctuations above or below that design voltage will result in an increased or decreased kW output from the shower proportionate to the square of the voltage difference. A 10% increase in voltage would bring about a 10% increase in current and a 21% increase in kW output, whereas a 5% reduction in voltage would reduce current by 5% and kW output would reduce by almost 10%. Appliances like TVs and PC's on the other hand tend to draw a constant wattage so any reduction in supply voltage would lead to a proportionate increase in current drawn.

@wisteela 8 ай бұрын

Does anybody know if you can still by dark chocolate Bounties?

@danielson101 6 ай бұрын

swapping that tank out would be a chore!

@Chris_In_Texas 8 ай бұрын

God I wish we could get three phase in a residential areas here in the USA! I would be all over that. Get rid of all the dumb single phase to three phase converters that don't work near as well as having real three phase. 🤠👍

@bramcoteelectrical1088 8 ай бұрын

😂I can get you a cable across the pond cousin.... 😅could take a long time thou and a big go fund me😂

@theodorgiosan2570 6 ай бұрын

Some parts of the US 3 phase is relatively common in residential. Here where I live we have a 3 phase high leg Open Delta setup, 100A. Due to be upgraded to 200A 120/208Y when the power company has time. As long as you live on a street with 3 phase power lines the power company has no problem hooking you up. Most of the time they do it for free as well because you are increasing the load and better balancing their system. All of New England works this way, most towns have 3 phase on most larger streets.

@Chris_In_Texas 8 ай бұрын

23:05 That is one thing that I have noticed with the exception of the one house you had to walk away from where the wiring was so bad, there aren't many power strips there in the UK it seems, at least in the homes I have seen in videos. Here in the USA, if a house doesn't have a handful of them or at least one in every room, something it wrong. Case in point we have 179 outlets (each with two plugs per outlet) / (not including 240V outlets, we have eight 240V outlets from 30A-50A) in our house, and we still have somewhere around 10 or more power strips or extension cords in use all the time. I guess that is the reason for all are AFCI (AFDD) requirements here for pretty much every single breaker now. Our 5mA GFCI (RCD) are required in any damp / wet areas only for the most part. Keep up the good work! 👍🤠

@petermichaelgreen 8 ай бұрын

We certainly do use power strips in the UK. Perhaps we just do a sufficiently good job of hiding them so you don't see them in videos ;). I certainly have at least one in every room except the bathroom, kitchen and hallway. I used more when I lived in a rented property and could not make permanent additions. One thing that does seem different is that the number of sockets per strip is lower. 4 and 6 are common. Larger numbers exist but are fairly rare. It's common to see power strips daisy chained, though some H&S types frown on this. We don't go in for high-current sockets in domestic applications. Our driers are lower power than yours to fit within the 13A a normal socket can deliver. Electric cookers here are hard wired.

@Nyle95 8 ай бұрын

179..?

@theodorgiosan2570 6 ай бұрын

@@Nyle95Some areas of the US, the average house is 4000+ square feet, and new construction homes have tons of outlets. 42+ circuit panels are the norm even in a small house. Most new houses are being built with 400 amp service. The size of panel used in the UK for a whole house would be a subpanel for a shed here. So 179 outlets is not that outlandish.

@Nyle95 6 ай бұрын

@@theodorgiosan2570 Why do you need so many? Just the size of the buildings?

@theodorgiosan2570 6 ай бұрын

Combination of the size of the buildings, the code requirements, and people's desire to have "smart" devices and TVs all over the house. The code requires a certain number of outlets per room, either based on dimensions or the type of room/location. Even in the room I am sitting in in my 200 year old house, which is a 10x10ft (about 3x3m) room, has an outlet on each wall, and the wiring is from the 1930s. Modern rooms would have at least 3 or 4 outlets per wall not counting special purpose outlets like TVs. The other thing is, unless you live in New England, some parts of Arizona, some parts of Michigan, and certain areas in California, most power companies will not allow you to get 3 phase service to a house. So instead of a reasonably sized 200 amp 3 phase service for a large house, you end up with ridiculous 400 amp, and sometimes even 600 and 800 amp single phase services. Personally my house here in New England has 3 phase, but even here and even on streets that have 3 phase available, it's rare to see a house with it installed. Most electricians will refuse to do it because "they've never done it that way" or "houses don't usually have 3 phase". So even when the power company is happy to provide it, you need to call a commercial electrician to install it. 400 amp services are typical here because in say a typical new construction 2500 sq ft house for example, you'll have a 36kw+ tankless water heater that pulls over 100 amps, it will likely be heated with all air source heat pumps, it will likely have a 2-4 with garage with 2-4 minimum 50 amp EV charging outlets, possibly a 30 and 50 amp RV outlet by the driveway, fancy electric cooktop, generally 2 ovens in the wall, large fridge, etc. Just huge houses and even if not huge, still a huge amount of electrical devices because that's what people want in new construction.

@philheath6364 8 ай бұрын

How do you price having yourself & an other electrician & lad on the same job?

@okaro6595 8 ай бұрын

21:13 What they are just taped together, not even twisted? That is like inviting arcing.

@artisanelectrics 8 ай бұрын

No clue, very bad install here

@RickRick-sw7mb 23 күн бұрын

the costume was probably on the black phase on the single phase supplier because the only connection on the fuse block was line2.

@martinw245 Ай бұрын

I'm wondering if Artisan should buy the customer snacks, given how much they charge. 😀

@showme360 8 ай бұрын

Do you guys carry Defibrillator in your vans, because the way things are looking it might not be a good idea!

@artisanelectrics 8 ай бұрын

Currently we do not haha

@danielson101 6 ай бұрын

Ahh like boiler system, looks harder to troubleshoot?

@user-hl1vw3ml3g 8 ай бұрын

Hi, Do I need a proving a proving device like Kewtech KEWPROVE3 Proving Unit Device with the Kewtech KT1780 2-Pole Voltage Detector & Continuity Tester. I does a inbuilt proving test when you touch the probes together. Absolutely great channel, I really enjoy the content.

@kellymarieangeljohnson114 8 ай бұрын

Hey Jordan I'm with you Love Bounty bars!!

@artisanelectrics 8 ай бұрын

Great to see fellow Bounty fans!

@DarylRaverty 8 ай бұрын

Seems the UK have a lot of really rubbish switchboards and meter setups. In Australia we usually have everything in one outside meter box and switchboard combo metal box. No ring circuits either. Of course if its not a freestanding home you have common meter location and switchboard in the flat. Etc. I think we have it easy. What are your thoughts?

@georgebarnes8163 6 ай бұрын

Worst socket wiring I have ever seen was in a neighbours house where some clown had wired a socket into a wooden shed from the house using two lengths of satellite cable, the socket was under a reasonably high load , namely a tumble drier. I was lost for words when I saw the wiring.

@cthawes 8 ай бұрын

Hi. What is with the heaters you have there in the shower ? I am in Australia we just have a water heater normally outside for the hot water Either electric storage or instant gas That works the whole house.

@steveb1856 8 ай бұрын

It’s an instantaneous electric shower. They came about because most houses in the UK had a vented low pressure hot water system, whereas the cold was at mains pressure, most didn’t have enough hot water pressure to work with a mixer shower. Electric showers use just a cold water feed at mains pressure and heat the water instantaneously as well as controlling the shower temperature. They range for 7kW up to 10.8kW.

@cthawes 8 ай бұрын

@@steveb1856 ok cool very interesting. Are they used in every type of houses or do newer ones have a central type of system? If you have the shower heater is there hot water at the other taps in the house or just warm? Wow 10.8 kw. I’d hate to be paying the bill for that to be running , Here if you have a electric storage hot water system and depending on the house size they are normally 250+ litre and only come on in off peak times so not really expensive to run and normally have a 3.5 kw or so heating element

@barrieshepherd7694 8 ай бұрын

@@cthawes The shower only draws current when in use so they work out quite cheaply 'per shower' Not all houses have them, depends on the boiler system, some boiler systems run at mains pressure. Another solution is a shower pump to overcome the low pressure from older header tank systems. Bulk electric water heating, as used in Aus., Is not that common because of cost but properties often have an immersion element in the hot water cylinder for use when the boiler is off.