I brought the M29 too. I got to admit the Dan Wesson build much better. It is solid, firm, and just feels premium in many ways. There are wood grips available on eBay, made in Thailand. I have tried already. They looks good. But without the metallic insert, the weight and balance of the gun feels a bit off to me. So I stuck with original rubber grip eventually. But I couldn't resist BIG bore revolver, with BIG cylinder.

@@BadGuyDennis Good point, they added much weight to the grip panels.

You use a tiny Allen key that screws into the top of the gun

This reply is gonna long. Rifling can only be worked on projectiles which have somewhat of rod-shape. Also, the diameter of the projectile has to be slightly larger than the lands of the rifling in order for the projectile to engage with the rifling to spin. There is tremendous of fiction. This replica is a low pressure system (compared to those of true air gun) and doesn't have the power to overcome those friction. Rifling is a very horrible horrible idea for spherical projectiles. I knew it very clear. My first premium airsoft gun is a MCG Beretta M92F in year 1992 (I still own it). It featured a so-called "Cyclone Barrel System" by the manufacturer, which actually is a rifled barrel. Back then there was no hop-up in airsoft world yet. The philosophy behind MCG of doing so was they tried to create a spinning air cushion around the BB to enhance the accuracy. When the whole system was new and the internal components were tight, we don't see the accuracy was any particularly impressive at all. (Even compared with my entry-level Tokyo Marui spring-powered hand-cocking pistol.) When the gun being played for a while and the tolerance started to lose, we gradually saw the trajectory going weird. The projectiles fly with circular motion in the trajectory in random direction because the BB follows the groves of the rifling! Simply replaced with a tight smooth bored barrel enhances the accuracy, range and muzzle energy, very substantially (many gas leak from rifling gloves with the original factory rifled barrel.) Later, when the concept of hop-up started to emerge in airsoft community (I was pretty early in experimenting this), we found the rifled barrel and pop-up just cannot co-exist. Hop-up will introduce more friction, with the already existing gas leak in the rifled barrel you lose even more power and range. As well as the trajectory was totally disastrous. So, I'm sorry but I have to say that even I know it's gonna offensive, in this case, your idea make no sense at all. However, if, this revolver replica, in air gun configuration, shoot mushroom shaped pellet, then your question might work. (But I have to emphasize again, I play airsoft only. I don't play air gun.)

Please noted at 2:18 with all testing conditions listed.

Try bore up the hole in the "primer" of the shell. Use stiffer hammer sping. (But the components will wear faster, and also leads to heavier trigger pull.) Get the long barrel version.

Thank you very much. I will Try The Modifications.

Lol definitely not wise to pull a replica on someone to scare them… because they just might meet you with that same energy and pull a real gun and dump your ass lol … and it would be considered self defense

culio pistillo Short answer is no. The barrel is made of aluminiun, and it has a hop-up unit. When those BB pass through the hop-up unit, the BB is very likely to make contact with the underside of the barrel lumen. Those BB made with materials you mentioned is harder than the barrel. In long runs, those BB will gradually eat out that barrel section. If you really want to shoot metallic BBs, there are 4.5mm airgun version.

thanks you alot!

@@BadGuyDennis thanks for the answer because i wasn't wanting to destroy my new revolver😂

I didn't. Those markings were just not there in this 2.5 inch version.

@@BadGuyDennis ohhh well there must be 2 different versions, one that i guess is a tad bit smaller but has the *dan wessen * on the barrel in cursive, im surprised no one os comparing these 2 guns

@@YoungBlaze I personally hate the “Dan Wesson” cursive branding lol super tacky

I live in a place where real firearm is pretty prohibitive. But we are relatively opened to airsoft and we don't have this orange tip issue. Any responsible online store should and will gonna ship the gun with orange tip on to those regions that are legally required. I have no idea who would send you the gun with no orange tip on without getting any trouble. It is more practical to get rid of the tip on your own, rather than seeking one you wanted from the source. I don't think it is difficult. (www.reddit.com/r/airsoft/comments/1vngv8/how_would_i_go_about_removing_the_orange_tip_on_a/) Being said though, be advised that removal of the tip on user level might cause you with legal, and in the worst case, even death consequences.

Miscellaneous Chaotic Lab Thank you. Do you think the chrome color will break off in the barrel if I pull of the orange tip? Thank you for your help!

I don't have any proof, all right? But I guess, chances are, very likely, that the tip (which is just a piece of plastic) is attached with super glue (i.e. cyanoacrylate). So heating should be get the job done pretty well. Some high power hairdryer may be good enough. Or you can take the outer barrel apart (demonstrated in my video), submerged in hot water. Make good use of duct tape, masking tape, towels... whatever to protect the metal surface. A more stupid way is take apart the outer barrel, and submerged in acetone (remember to remove the front sight beforehand, otherwise it will ruin the black coating) overnight. Yes, you will end up with a gooey, sticky mess. But at least it leave the metal unharmed.

Miscellaneous Chaotic Lab Thank you very much. It’s a good idea taking the barrel apart and use hot water.

Hi. If you are inside E.U. try to buy your replicas from France. They do not have those kinds of laws, so far... (And as far as I know). Good luck!!

I'm not lived in Canada. But I google search for some lazy guy. www.herooutdoors.com/gun-heaven-full-metal-brass-shells-for-wingun-dan-wesson-6mm-series-airsoft-co2-revolvers-set-of-12/

@@BadGuyDennis 😅😅

130

The problem is: they don't have the barrel independently for sell. If you can found one, then you're right. It is not impossible, but impractical.

this is such a waste...you could have basically 4 revolvers in 1 in this way, this making the gun the best in class. It already is on top best, but imagine having it with this possibility... :) Hopefully they will make spare parts at some point in future...

Money

Can you turn this air weapon into a bullet?

@@wal8610 Hi!! If you are thinking abut converting thid replica to somehow fire real bullets, please forget it at once! It is impossible, supid and a crime. The first person to be in high danger would be the one who has that gun in his/her hand. Please forget those kind of ideas!!!

No. They are "mid flow" shells. You may bore up the "primer" hole to see if there is any increase in muzzle velocity.

Miscellaneous Chaotic Lab Thank you. Do you have a link to a place I can buy them? They look much better than the normal shells.

The shells that came along with the gun are already the more realistic metal "bullet head" front. I brought the the gun and spare shells directly from the retail store of my local distributor, which is far more convenient for me than acquire online.

Can you buy the 6inch barrel and replace with the 2,5inch?

If I recalled my memory correctly, I did mention in the video that I have to trade out my previous 4 inch model in order to replace with this 2.5 inch version. If this replica, just like the real firearm, came with a replaceable barrel package (I wish it would), then I don't have to do that.

Online pendejo

Oscar Patino no mine was 100

John Raju 106$ it depends on we’re you live

@@370zalex_8 in india it's nearly about 700-800 bucks...👀

@@himanshukaushal3885 USD? …..That is outrageous…

There are 6mm "airsoft" version and 4.5mm "air-gun" version. Please noted that "airsoft" and "air-gun" are two different animals. We use "airsoft" gun to play airsoft survival games while "air-gun" is prohibited. Both version use a same box. But they were sold separately. I have no idea about the "air-gun" version because it is game illegal and I have no interested in it at all. All I disclosed in this video is exclusively on "airsoft" version and so please don't keep asking me about the "air-gun" version nor anything related to shooting non-plastic BB. There are plenty resources on KZfaq and internet that you can find the information you wanted to know. Thank you.

X Navy Sinnathambi K Jaya balaki S.pandi N.Raj

@@sksamy9022 un. Mamao

imagine making a whole review in a language that isn't your mother tongue, yet still managing to be extremely clear, informative, and exhibiting a fantastic vocabulary... Only for someone to post a comment shaming your accent. Deplorable.

@@MachineVox I may be, but your comment allowed me to revisit mine after 3 years and I still got a chuckle out of it.

@@Greenmachine305 It's nice to see that you've matured over the past 3 years 🥴

@@MachineVox When a person has reached peak asshole, there is no room left for growth.

yup , if you shoot them in the dick

It’s called a replica not a firearm silly. It will hurt but it will not kill

@@sniffles3585 maybe he means if you throw the actual replica gun at their head

YoungBlaze LIGMA NUTS Seriously though yeah that would hurt

First ten shots will go through three pizza boxes.

😅

CAMERON K Bit racist

@@sniffles3585 bubbu wap is not racist

Your Mum ❄️❄️❄️

@@denniskapczynski9728 lol

That's all you have to say? You're going to try to shame a non-native English speaker's pronunciation? I'm going to assume you're a child with an undeveloped frontal lobe, so I won't be too harsh. This guy, as a non-native English speaker, is breaking out words and phrases that I doubt you could use in a sentence, Have a little respect.