Had a chance to really play around with this revolver and its overall amazing! ASG did great here. Hope you enjoy the video!
Пікірлер: 160
@generalkenobi45093 жыл бұрын
Warning: swinging any revolver cylinder closed will wear down the insides and after a while it won’t reliably rotate and you may have accidents where the cylinder isn’t aligned properly.
@natelaurendeau75003 жыл бұрын
#LIFESAVER
@flatfish772 жыл бұрын
Thank you General.
@marvinelliott-cz3kq Жыл бұрын
I did and my gun broke
@homeguard8481 Жыл бұрын
So uncivilised, I like it.
@braveclyde4 жыл бұрын
Don't worry about not being able to swing the cylinder shut by flipping the gun. You don't actually do that with real revolvers as it will damage the gun. In the movies they do that, but not in real life.
@kelvinangeles52855 жыл бұрын
🔥🔥🔥🔥🔥🔥🔥keep up with the great content
@OfficialFlokey4 жыл бұрын
Best review video ever!
@MaxCherepenin4 жыл бұрын
Glad you liked it!
@bigrig9231 Жыл бұрын
Very thorough
@EliteHitmarkers3 жыл бұрын
Great Review
@g00dSp33d754 жыл бұрын
The top hole infront of the cylinder is for hopup adjustment
@respect54402 жыл бұрын
My dream Magnum airsoft gun
@PinoyGunFanatic4 жыл бұрын
Any thoughts about wingun revolvers? Are they accurate at good revolvers?
@roy-batty2 жыл бұрын
Really wish they did the green gas version of this. It would be so much more practical for me. Sometimes you just want to pop off a few shots, not having to use the entire CO2 capsule.
@ilmt2 жыл бұрын
I have foind on ALiexpress a CO2 capsule shaped gas tank with filling valve at bottom and exit one at the top. It is quite cheap (like $10) and I think it could work in the revolver quite well. I have only tested it in a GBB Mini Uzi replica and the Green Gas doesn't have enough power to reliablty cycle the action (close, but no cigar) - which is not a problem in a revolver. One thing to note - it is necessary to be able to fill the capsule after it was inserted into the gun/magazine otherwise it would have gas for only a couple of shots - that is the problem you can find in the showcases and poor reviews on youtube and on the site - so it might require slight modification of the nut (drill it through) but other than that I think it could work well in the revolver.
@g9sneak72 жыл бұрын
Your saying once you fire with co2 u have to use the whole tank in the moment?
@ilmt2 жыл бұрын
@@g9sneak7 Basically yeah, it is not recommended to leave a capsule in the gun for a long period of time as it stresses it.
@EWAIRCRAFTONTOP Жыл бұрын
Fun fact: you cant shoot green gas in winter
@lofighost8811 Жыл бұрын
@@ilmt actually it is advised to keep ur gbb gun/mags gassed up as it help keeps the O-Rings fresh for longer
@joshfromalstate84384 жыл бұрын
The top hole is the hop up its adjustable
@sleazykilla3605 жыл бұрын
You saw evike has the EF Glock 18c's? Can't wait to see a rewiew on them. Also whats up with the lack of content? Very supprised you didn't pick up the EF Glock 19x yet
@MaxCherepenin4 жыл бұрын
Yeah, its been a busy few months and getting all of these guns are quite expensive. I am working on getting things going again though!
@BalloonLlama7 күн бұрын
Hey I got a question when I dry fire it without co2 it jams a lot is that supposed to happen?
@michelledulay21704 жыл бұрын
I have this...it’s a fun plinker...I use the powered down shells...
@MaxCherepenin4 жыл бұрын
Nice, yeah i love the high power shells. The power overall is pretty awesome.
@beison80004 жыл бұрын
@@MaxCherepenin Do the high power shells work for the 715 model?
@m6dspartan9034 жыл бұрын
@@beison8000 yeah
@ryanandandreagrendus316914 күн бұрын
At the 13:40 mark on the video you talked about what single and double action is, you are right as to the description of what’s happening with single and double action BUT you said there’s no difference using the gun or any gun for that matter single or double action. There is a big reason why one is different in its use, with double action you are cocking the hammer and firing the gun therefore it takes far more pull strength on the trigger compared to single where you cock the hammer first anda when taking the shot you are only releasing the hammer, much lighter trigger pull and so your accuracy goes up, there’s a little piece of info.
@PeterAgostiniJdcap262 жыл бұрын
Never slap the cylinder ! Is this Barrel rifle?
@nedimdzudzevic68802 жыл бұрын
12:08 nice
@Roboli-nr1mv3 жыл бұрын
What length barrel is this
@marctoscanini7225 Жыл бұрын
The title says airsoft?? Where is the orange tip?? This looks like the bb version?? So wil it shoot steel bbs..
@clayter222 Жыл бұрын
what caliber is the shells
@jersonbaco11362 жыл бұрын
Where can I buy this stuff magnum 357 dan wesson? I want to buy...can you help me? Please
@CaptainKetchup2 жыл бұрын
i should've got this one over the ASG Licensed Dan Wesson WG
@nathanielcecil2wz98 Жыл бұрын
This is the asg one
@Nathan-yk5km4 жыл бұрын
Had the original gun a while now. Eventually parts wear to the point that the cylinder catch (being plastic) can no longer perform and hold it in place. Trigger is a bit iffy, a few other issues. That said, I’ve not maintained it at all, it does/did shoot hotter than quoted. You can also modify the power really easily. Overall a great gun and I certainly don’t regret getting it, however would I buy it again? I don’t think so. With all of that in mind, this is likely upgraded now, and I am aware you can buy replacement parts so this was just my ‘two cents’
@scouttrooperhh-14874 жыл бұрын
How do you increase the power?
@charlie917572 жыл бұрын
Does it still work, I just got one
@ardakaraca12910 ай бұрын
@@charlie91757Do you glad to got it sir?
@memberberries97822 жыл бұрын
Beautiful guns! I own a steel grey 2.5" and a silver 4". I'm yet to get the 6" to complete the collection!
@Baskin209162 жыл бұрын
Wait until you hear about the 8 inch
@hannibalsmithairsoft59232 жыл бұрын
How does the grey look in term of being like monotone grey or almost a case hardened effect
@memberberries97822 жыл бұрын
@@hannibalsmithairsoft5923 it's quite glossy, it gets a rainbow gun metal effect when it's destroyed in fingerprints, and when it's wiped down it's just very dark and shiny nearly black almost. I do prefer it to the silver one I have
@hannibalsmithairsoft59232 жыл бұрын
@@memberberries9782 Awesome, I already have like a race gun gucci glock and wanted too get something super impractical and fun as hell.
@reubster5292 жыл бұрын
Does it rust
@throttlegoblinfpv2 жыл бұрын
i found some power down shells for it that you can get which makes lower FPS
@SC-rk7be8 ай бұрын
newbie here, why would u want lower its fps? cuz for durability sake?
@throttlegoblinfpv8 ай бұрын
@@SC-rk7be to be able to play CQB and shoot other people etc, CQB arenas usually have FPS limits
@SC-rk7be8 ай бұрын
@@throttlegoblinfpv ah. makes sense now. Thank you! Could you maybe help me decide between ASG DAN Wesson original 8" vs this 715 6" version? can't decide!
@throttlegoblinfpv8 ай бұрын
@@SC-rk7be im sure you like either one, the 8" is of coure more badass looking also i have a 3D printable shell design, which are meant to be cheap and moreless not as worrisome to lose on the field, i also made a speed loader that fits regular speed loader pouches
@lefishe24852 жыл бұрын
12:08 haha nice.
@thomasmartin51822 жыл бұрын
Just got one of these and need advice- When i'm loading the co2 cartridge, its hisses and sprays co2 out over the cartridge. Am i twisting the 'alan-key' too slowly?
@lefishe24852 жыл бұрын
Most likely yes, id just screw it down faster and a little more firmly so it has a good chance of sealing.
@thomasmartin51822 жыл бұрын
@@lefishe2485 much obliged, good sir. Final question; is it bad to leave a 'not empty yet' cartridge in the gun over time? Will fade over it's own or damage the gun. Thanks again
@Healz02 жыл бұрын
@@thomasmartin5182 it’s actually best to leave one with a little gas in rather than none, as the seal can deteriorate over time with no pressure against it
@jaysoncruz15642 жыл бұрын
always put silicone oil on cartridge tip before using
@josephmichael42194 жыл бұрын
Is it true that it has hop up? On Evike it is listed with an adjustable hop up.
@g00dSp33d754 жыл бұрын
The top hole he says is for mounting is for hopup adjustment
@emilh23613 жыл бұрын
@Epic People59 your mom bought this
@rowenramnath20162 жыл бұрын
I don't when the revolver gun was released. I just got my
@hannibalsmithairsoft59232 жыл бұрын
How many shots you get out of 1 co2?
@Vaydore2 жыл бұрын
From what I've heard, about 50-60
@robert-tm3qz4 жыл бұрын
This only shoots the plastic 6mm bbs? I thought it shoot the small metal bbs
@MaxCherepenin4 жыл бұрын
There are two versions. This is the 6mm version.
@storminormtharp59483 жыл бұрын
how did you get all of the orange plug out? i remember the orange tip you cut it off but i see it's all gone?
@fattybaddie3 жыл бұрын
you probably wont wanna do that. just sayin
@storminormtharp59483 жыл бұрын
@@fattybaddie why
@storminormtharp59483 жыл бұрын
@V no it’s not
@itsvaporx96332 жыл бұрын
there is no orange tip on it
@murrkat6148 Жыл бұрын
@@storminormtharp5948 it's what shows its not a real gun. If a cop sees it without the orange tip he might shoot you. Plus it's required in some states.
@Skaetdude3 жыл бұрын
I was thinking of this model 6"BB but i noticed the 4" shoots pellets, I like the chrome. What do you think about the difference between BBs and Pellets. Thanks
@GhostTacticalTTV3 жыл бұрын
BBs are metal balls and pellets are sharp pointed chunks of metal
@Skaetdude3 жыл бұрын
@@GhostTacticalTTV Sorry talking about accuracy.
@damascusthecat70283 жыл бұрын
@@Skaetdude they are more accurate but they are more expensive not much more tho
@akilliol3562 жыл бұрын
are the bullet casings brass?
@RCascade19962 жыл бұрын
I own this and yes, the casings are brass
@benp47363 жыл бұрын
do you know what the revolver is made from? Is it steel or some sort of other alloy like alluminium or zinc.
@MaxCherepenin3 жыл бұрын
Probably aluminium or yeah maybe zinc too.
@benp47363 жыл бұрын
@@MaxCherepenin it feels strong though, right?
@MaxCherepenin3 жыл бұрын
Oh yes, it feels pretty solid.
@benp47363 жыл бұрын
@@MaxCherepenin nice, thanks for replying.
@therabbithat2 жыл бұрын
@@benp4736 very heavy! The weight of it you'd think it was steel
@stevenseagondollararchives2060 Жыл бұрын
anyone put a tracer unit on one of these things?
@sweet_amir Жыл бұрын
What is it that shoots out? That's the only thing that confuses me.
@deadlytiger9097 Жыл бұрын
BBS u put them in the shells tip
@Bonkekley4 жыл бұрын
Does it come with the co2 cartridges?
@m6dspartan9034 жыл бұрын
No
@lexurious22272 жыл бұрын
On an average, how many shots per C02 capsule?
@MaxCherepenin2 жыл бұрын
Hard to say as I have not truly counted shot for shot but I want to say 60-100 per capsule. Since there is no moving parts which uses more gases, you get more out of these revolvers.
@leonardoalbuquerque48110 ай бұрын
👍 parabéns
@monke7558 Жыл бұрын
Does it matter what bb calibre I use?
@Aeternum-YT Жыл бұрын
Yes, the barrel only supports 6 millimetre bb's
@Nightproductionsofficial3 жыл бұрын
Where do I buy I really like this gun
@MaxCherepenin3 жыл бұрын
evike.com
@s-man35984 жыл бұрын
Guys does it use only plastic bbs or something else too?
@aeroyt4208 Жыл бұрын
How much that Gun?
@Aeternum-YT Жыл бұрын
It isn't recommended to use steel bb's because it can damage the barrel.
@Jaden_Gearhard3 жыл бұрын
Anyone know of any left handed revolvers for airsoft?
@bimorepolish68663 жыл бұрын
technically all revolvers could be left handed
@bob62562 жыл бұрын
When I get this I’m defo playing Russian roulette with my friends, just shooting eachother in the chest
@itsvaporx96332 жыл бұрын
did you do it and how bad fit it hurt
@FwGelo3 жыл бұрын
what bbs does it use ?
@MaxCherepenin3 жыл бұрын
6mm.
@JarppaGuru2 жыл бұрын
10:19 speed loader first insert them on holder load bb's then load weapon. how fast is it. only works if have many speed loaders ready. nobody has LOL its faster insert bb and load it revolder lol
@oleholm56012 жыл бұрын
The barrel on mine is wobbly.
@MaxCherepenin2 жыл бұрын
MAy be a defect from the factory. If you just bought it, see what you can do for a return or money back to get another one.
@splatter76093 жыл бұрын
Dose it have an orange tip at first
@MightyMorphineMan4 жыл бұрын
From where do you got the gun ?
@MaxCherepenin4 жыл бұрын
evike.com airsoft version
@MightyMorphineMan4 жыл бұрын
Thx 😊
@MightyMorphineMan4 жыл бұрын
And can i buy it in Germany
@okae17584 жыл бұрын
Jesus bout to ‘save’ some souls
@shartcontainer2 жыл бұрын
Can this shoot plastic bbs
@stevenpoe538010 ай бұрын
Yes, it shoots 6mm plastic BBs
@deshawnanderson77773 жыл бұрын
Where can i buy this?
@MaxCherepenin3 жыл бұрын
evike.com
@catobeanzo Жыл бұрын
I got this gun and all I can think of is “it’s high noon…”
@alphagamer9059 Жыл бұрын
Bruh
@besandoval9112 жыл бұрын
where do I buy it
@RCascade19962 жыл бұрын
Airgundepot.com
@bigrig9231 Жыл бұрын
Where is the hop up unit to adjust it
@Binehoad4 жыл бұрын
How much is this revolver
@abdulzahid31204 жыл бұрын
Around £200
@jordycomic1444 жыл бұрын
115 in USD
@Binehoad4 жыл бұрын
Black Gold alright.
@benp47363 жыл бұрын
@@abdulzahid3120 its not £200. its £110 on patrol base
@Shylade2 жыл бұрын
Where’s the orange tip
@MaxCherepenin2 жыл бұрын
It was removed. All Airsoft guns sold in the US will have an orange tip.
@lightbulb42573 жыл бұрын
Wheee can I get this?
@MaxCherepenin3 жыл бұрын
evike.com has them
@Mr.Helper.2 жыл бұрын
How much ?
@MaxCherepenin2 жыл бұрын
120 ish I think I paid for this.
@mm-zn5hh3 жыл бұрын
What i dont like of this is the plastic sight
@MaxCherepenin3 жыл бұрын
Yeah, have to agree there!
@EWAIRCRAFTONTOP Жыл бұрын
When your aiming the gun ngl it looks like a raging bull
@berting29094 жыл бұрын
Is that rick grimes gun?
@scouttrooperhh-14874 жыл бұрын
No, rick has a colt python
@earthmagician503 жыл бұрын
That’s what I thought too
@matthours17832 жыл бұрын
Dietz nuts
@vahanyazarian55827 ай бұрын
Keep handflipping and you,ll screw up the Alignment of the crane!
@anabolictiger94664 жыл бұрын
"this particulair revolver" no hate but cmon, thats kinde funny
@user-vq7go9jt2j9 ай бұрын
also on a real gun or that toy slamming the cylinder is bad for alignment of a real gun but that's just a simple toy for children and not heavy build so who cares. don't look into business end and watch BB come out
@user-vq7go9jt2j9 ай бұрын
you don't know much about function or real guns, example vents on top of barrel is for esthetics and in theory some function for cooling, release for cylinder is in wrong place, not a 1 to 1 but great toy for you
@adingamoyo21864 жыл бұрын
Can I have that Dan Wesson 715 please🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏👍🙏
@m6dspartan9034 жыл бұрын
Go buy your own
@adingamoyo21864 жыл бұрын
I can't buy one there is no revolver here in the Philippines and it's too expensive I need a side arm
@m6dspartan9034 жыл бұрын
@@adingamoyo2186 if you cant import one to you than look at others because honestly revolvers aren't practical
@gxooo4 жыл бұрын
MINECRAFT PLAYZ Just wait until you're old enough lmao..
@adingamoyo21864 жыл бұрын
I guess your right
@PinoyGunFanatic4 жыл бұрын
Any thoughts about wingun revolvers? Are they accurate at good revolvers?