Assembling a Keter Darwin 6x4 Composite Garden Shed

Рет қаралды 153,843

3 жыл бұрын

In this video I show how I assembled my Keter Darwin 6x4 Composite Garden Shed from start to finish. You may find this video useful if you are considering one of these sheds for your garden. (I bought this shed with my own money. This is not a paid promotion).
Amazon UK Link to Keter Darwin 6x4 Garden Shed : amzn.to/47jrrdL
* As an Amazon Associate I earn from qualifying purchases. Thank you.
To Subscribe to the Channel click here: kzfaq.info...
* Keter Darwin 6x4 Garden Shed Review (After 1 Year of Use)
• Keter Darwin 6x4 Garde...
* How to Build Heavy Duty Storage Racking / Shelving (Out of Scrap Wood):
• How to Build Heavy Dut...
* How to Anchor a Plastic / Metal Shed to a Concrete Base:
• How to Anchor a Plasti...
* 6 x Simple Improvements / Upgrades for a Garden Shed:
• My Top 6 Simple Improv...
* How to Frost Glass or Plastic Windows with Glass Frosting Spray Paint
• How to Frost Glass or ...
*Assembling a Keter Store It Out Max 1200L Storage Shed:
• Assembling a Keter Sto...
🤝 Help Support the Channel 🤝
☕ Buy Me a Coffee: www.buymeacoffee.com/PhillWyatt
* Catch me on Instagram: / phill.wyatt.projects
How to Anchor a Plastic / Metal Shed to a Concrete Base:
• How to Anchor a Plasti...
(Check out the Channel Play Lists):
* Woodworking & D.I.Y:
• How to Make a Simple P...
* Gardening & Plants:
• Gardening & Plants
* Workshop Build:
• Workshop Build
* Restoration Projects:
• Restoration Projects
#keter #shed #shedbuild
Email : phillwyattoutdoors@hotmail.com

Пікірлер: 456

@PhillWyattProjects 3 жыл бұрын

Amazon UK Link to Keter Darwin 6x4 Garden Shed : amzn.to/47jrrdL * As an Amazon Associate I earn from qualifying purchases. Thank you.

@macker8017 3 жыл бұрын

Hi mate I can't put the screws in for the door in the door aperture it seems like there not drilled out I have tried screwing through the holes but it only turns about 3 turns

@PhillWyattProjects 2 жыл бұрын

@@macker8017 They felt like that for me too. I had to apply quite a bit of pressure and they eventually self tapped into the metal.

@briancranch618 2 жыл бұрын

I notice you assembled the shed very close to a wooden fence. I am assuming all the fasteners and fixings etc can be accessed from the interior. I am about to order this shed and intend to site it within a few inches of my 2 metre high brick garden wall. Can you tell me if this might create problems in putting the shed together? Many thanks.

@PhillWyattProjects 2 жыл бұрын

@@briancranch618 Hi Brian, actually no I pulled the shed out from the fence and fixed the screws then pushed it back. I shifted one corner at a time which was quite easy in my opinion.

@briancranch618 2 жыл бұрын

@@PhillWyattProjects Many thanks Phil. I did wonder if it would bend or distort but there will be two of us so should be fine. Great stuff, ta.

@christurner5473 3 жыл бұрын

The shed came out great , I really look forward to seeing part 2 of you putting up shelves and racks in there , perfect little shed

@PhillWyattProjects 3 жыл бұрын

Thanks Chris yea it does seem like a nice little shed relatively solid. I will be making some racking very soon for it! :D

@seanttraynor 4 ай бұрын

A great help in our build, great to hear a well spoken, and timed description of the work in stages, being hearing impaired that is so appreciated, along with the subtitles, priceless for us.

@PhillWyattProjects 4 ай бұрын

Glad it was helpful!

@paulwhysall4090 2 жыл бұрын

Building the exact same model for my daughter tomorrow, your video has filled me with confidence! Thanks Phill.

@PhillWyattProjects 2 жыл бұрын

Thank you your welcome 👍

@toadoftoadhall2837 2 жыл бұрын

Mine arrives tomorrow, so very helpful to know what to expect. Electric drill going on charge now. Thank you, excellent video.

@PhillWyattProjects 2 жыл бұрын

No problem glad to help!

@jenniferlawton1858 3 жыл бұрын

Assembling ours this week! Thanks for the video. Looks easy enough.

@PhillWyattProjects 3 жыл бұрын

Your welcome 👍

@seasidepeter 11 ай бұрын

Thank you for a clear, well-paced video. A great help.

@PhillWyattProjects 11 ай бұрын

Your welcome 👍🏻

@Mike-gz4xz Жыл бұрын

Planning on buying one this week , this is one of the best instructional Keter Darwin videos iv seen ever ,many thanks Phill great job its much apricated .

@PhillWyattProjects Жыл бұрын

Cheers Mike glad to help 👍🏻

@ontariopicker6343 3 жыл бұрын

I am thinking about purchasing one of these myself. I had ordered a metal shed and it came today all dented up with lots of scratches on it. Looks like I wasn't the first to own it. I've had my fill of the metal sheds, time for something new. Thanks for the video.

@PhillWyattProjects 3 жыл бұрын

Hi, yea I agree with you on that. Metal sheds often get damaged in transit and they are a pain to assemble.

@kandi-g 2 жыл бұрын

Hi there. As I am planning to get a similar shed, I wanted to see one being assembled. You did a fabulous job of and making it very clear and informative as well as showing how easy it was to assemble :)

@PhillWyattProjects 2 жыл бұрын

Thank you 👍

@Oliveo2655 Жыл бұрын

This was excellent. We are assembling ours next weekend and this helped so much! Thanks

@PhillWyattProjects Жыл бұрын

Your welcome 👍🏻

@robertasavage1881 2 жыл бұрын

Thanks for this video, we built one of these sheds yesterday, it took about three and a half hours which I didn't think was bad for a 71 year old woman and a 63 year old man. Nice shed, looks a lot bigger than we thought it would !!

@PhillWyattProjects 2 жыл бұрын

Thank you 🙂 that's not bad at all. I do like this shed too it's a useful space 👍

@trinamcmullan7091 2 жыл бұрын

Found this really useful especially the fact about being able to use the window section for the door, thank you.

@PhillWyattProjects 2 жыл бұрын

Your welcome Trina glad you found the video useful.

@ryandoherty6174 Жыл бұрын

Much appreciated! Going to have a go on the exact same shed next week. If it goes that smoothly, I'll be chuffed. Thanks again!

@PhillWyattProjects Жыл бұрын

The weather is good for shed building 👍🏻

@ryandoherty6174 Жыл бұрын

@Phill Wyatt Projects trust me, if it rains, it'll be the day I pick! Keep up the great videos pal.

@birgittebusch6944 10 ай бұрын

Hi from Denmark. It doesn’t look too difficult, so I’ll give it a try and assemble it myself. Thanks for a very assuring video, that you can actually assemble it single-handedly. Looks great 🤩

@PhillWyattProjects 10 ай бұрын

Your welcome. Yea it's not too difficult. A flat level base is probably the most important part to make things go smoothly.

@johnsweekendworkshops4100 3 жыл бұрын

Nice little shed and excellent video. Built mine today with the help of your video. Only thing that might have been useful to mention was the fact the corners aren’t the same size so you have to be careful to follow the instructions and make sure you’re putting them in the right way.

@PhillWyattProjects 3 жыл бұрын

Thanks👍 yea probably should have mentioned that although this video was more about my experience putting it up. Not so much a step by step guide so I missed a few things here and there.

@johnsweekendworkshops4100 3 жыл бұрын

@@PhillWyattProjects no worries I found out before too much damage was done. Nice to see a channel that’s got some different stuff, really enjoying it

@PhillWyattProjects 3 жыл бұрын

@@johnsweekendworkshops4100 thanks I appreciate your comment👍

@seancanney4547 Жыл бұрын

Nicely done. I bought one of these sheds and plan to put it together this week. Thank you.

@PhillWyattProjects Жыл бұрын

Thanks your welcome 👍🏻

@DaleAmigaman Ай бұрын

Excellent and clear video which makes me a lot more confident before I begin building the shed. Thanks.

@PhillWyattProjects Ай бұрын

Thanks I'm glad you are finding it useful 👍🏻

@tripwired_ 2 ай бұрын

Got one of these to build tomorrow, thanks for the video, clear and well paced 👍

@PhillWyattProjects 2 ай бұрын

Thanks your welcome

@SujMenon 3 жыл бұрын

Looks pretty straightforward Phil. Need to get one of these myself with all the junk I am accumulating 😁👍

@PhillWyattProjects 3 жыл бұрын

Yea they are easy to put up. You spend most of the time just making sure things are properly aligned.

@paulwride1045 3 жыл бұрын

Excellent no fuss video. Thanks.

@PhillWyattProjects 3 жыл бұрын

Thanks Paul👍

@bryandunn425 Жыл бұрын

Thanks for taking the bother to do this. Very helpful. Having my delivered lunchtime. Best wishes Bryan

@PhillWyattProjects Жыл бұрын

Cheers Bryan your welcome 👍🏻

@Fizzoid 10 ай бұрын

Just bought one of these so appreciate the video

@PhillWyattProjects 10 ай бұрын

Your welcome.

@songstewart2606 Жыл бұрын

Hi your Vdo is easy to understand . I feel more confident now. Thanks 🙏

@PhillWyattProjects Жыл бұрын

Thanks your welcome 👍🏻

@davyboy278 2 ай бұрын

A good, helpful video. Thanks for posting it.

@PhillWyattProjects 2 ай бұрын

Thanks your welcome

@safeeraibrahim6061 9 ай бұрын

Just seen the video and now starting on my shed! Thank for such an informative video x

@PhillWyattProjects 9 ай бұрын

No problem your welcome.

@majesticallymade6177 Жыл бұрын

Excellently explained. Again no fuzz no hassle n to th point 🎯 Thanks for that definitely will b subscribing 😊

@PhillWyattProjects Жыл бұрын

Thank you! 👍🏻

@SonsareZ 2 жыл бұрын

Brilliant video! I found it really helpful. Thanks a lot 😊

@PhillWyattProjects 2 жыл бұрын

No problem 👍

@AaKk-ri8lu 2 жыл бұрын

Very informative and helpful video. Thanks

@PhillWyattProjects 2 жыл бұрын

No problem 👍

@P4JJP Жыл бұрын

Thank you for this video 😅 I was praying that someone had produced one as I’m taking delivery of mine tomorrow.

@PhillWyattProjects Жыл бұрын

No problem Jeremy your welcome!

@paullomas4620 2 жыл бұрын

Nice one bud! Just about to build mine. This will be a great help

@PhillWyattProjects 2 жыл бұрын

No problem Paul 👍🏻

@movementcoach7267 Жыл бұрын

Thanks for this, I've ordered the 6 x 6 one and am considering doing this myself rather than paying a contractor so this will help in sure

@PhillWyattProjects Жыл бұрын

No problem. Always better to do it yourself if possible. That way you know it's been done rite and not rushed.

@movementcoach7267 Жыл бұрын

@@PhillWyattProjects thank you, today is the day, fingers crossed

@MrKungfuAsh 2 жыл бұрын

Very helpful. Thinking of buying this shed .

@PhillWyattProjects 2 жыл бұрын

No problem 👍

@unclephil440 2 жыл бұрын

A great help. Thanks a million.

@PhillWyattProjects 2 жыл бұрын

No problem 👍

@slwilliams75 3 жыл бұрын

Great video mate 👍🏻 Good to find a great UK channel that is relatable- I'm all subbed up 👌🏻

@PhillWyattProjects 3 жыл бұрын

Thanks Simon much appreciated 👍

@michaeli160954 Жыл бұрын

Great video, thank you. Clearly you know your stuff

@PhillWyattProjects Жыл бұрын

Thank you very much!

@andyins1 2 ай бұрын

A very well put together video. found it very good as you went through all the stages with clear pictures and explained everything well. just got a 6x6 darwin so i take it will be silmilar

@PhillWyattProjects 2 ай бұрын

Glad it was helpful!

@gregormacintosh3909 3 жыл бұрын

Thank you from France Phill 👍

@PhillWyattProjects 3 жыл бұрын

Your welcome 👍👍

@Alfapash 10 ай бұрын

Excellent video, very well explained

@PhillWyattProjects 10 ай бұрын

Your welcome 👍🏻

@stephenterry6262 3 ай бұрын

Very good Phil. Thank you

@PhillWyattProjects 3 ай бұрын

Thanks!

@GaganShrma 2 жыл бұрын

Thanks for the detailed video. Will appreciate if you can advice on bolting long screws in roof and base from outside when you put it next to fence. One side of mine also sits next to fence.

@PhillWyattProjects 2 жыл бұрын

Yea so I pulled the shed out away from the fence to drive in the screws. I then pushed it back into place. It's not very difficult. I pushed one corner then the other gradually.

@tadcollins6778 2 жыл бұрын

Thanks Phil thinking about one of these, very helpful, great that you did a one person build; though I think you forgot the door hinges...

@PhillWyattProjects 2 жыл бұрын

Your welcome 👍🏻 I did forget a few things. It's not so much a how to video more of a my experience building the shed video.

@Jarmix-vq3gn 9 ай бұрын

Just had this shed delivered today, come to this video first for assembly. Let's see how it goes

@PhillWyattProjects 9 ай бұрын

Good luck 🤞

@ladylagertha4910 2 жыл бұрын

big help! although it took me and my husband about 5 hours to do😝 but to be fair we're like the chuckle brothers when it's comes to anything D.I.Y related 🤣

@PhillWyattProjects 2 жыл бұрын

Thanks! I think it depends what mood your in. Sometimes it takes me ages to put something together. When I'm in the mood for it I'm quite fast.

@digitalartsagent1338 2 жыл бұрын

Thanks! What size is the opening? Can’t find any dimensions online. Wondering if my larger snowblower will fit through the doorway.

@jezza1953 Ай бұрын

well you made that look easy thanks

@PhillWyattProjects 26 күн бұрын

Cheers!

@alantait5968 Жыл бұрын

Good clear video think I’ll purchase one now 👍

@PhillWyattProjects Жыл бұрын

Cheers Alan 👍🏻

@keteruk8879 3 жыл бұрын

Great to see this! It will be ideal for storing things from your workshop.

@PhillWyattProjects 3 жыл бұрын

It is very useful. And keeps the rain out.

@ecttreker9816 2 жыл бұрын

Great video. Thanks for sharing. Can you tell me the door opening size?

@bebo7537 9 ай бұрын

Well done, good info

@PhillWyattProjects 9 ай бұрын

Thanks 👍🏻

@robbiesaini 3 жыл бұрын

The side of my house would just about fit this with only a few cm either side. Problem is I won't have access to either side due to lack of space. Do you think all the screws could be put in from the inside of the shed? For the base etc? Thanks

@PhillWyattProjects 3 жыл бұрын

Hi, I don't think you can screw them from the inside I would not recommend that. You could assemble it the correct way then shift it into position after. It might take 2 people to move it.

@nathanbutcher9954 2 жыл бұрын

I recently purchased this shed and assembled it on a flat base. However, the shed doesn’t seem to be completely straight. I had issues initially with trying to fit the front upper roof piece, one side would fit really snug but the other wouldn’t. Once I got to the end and put the door on, one side of the door is roughly 1-2cm higher than the other side. It seems like I’m a few CM out somewhere but I can’t work it out. Might have to rebuild from scratch. Any advice would be appreciated!

@PhillWyattProjects 2 жыл бұрын

Hmm the only thing I can think of is that one corner or the base is higher or lower than the rest. When screwing the wall panels together you need to make sure they are correctly lined up. If a few screws are out of alignment it could cause one end to curve up slightly.

@angelathompson4680 2 жыл бұрын

Thank you, very helpful

@PhillWyattProjects 2 жыл бұрын

Your welcome Angela

@colinfaed5910 2 жыл бұрын

Hi , thanks for the video, it showed it was possible to put it up by yourself, and did not require two people as suggested by another video. I want to somehow attached a timber frame to one side to hang rakes, spades and other garden tools. do you think that might be possible?

@PhillWyattProjects 2 жыл бұрын

Thanks Colin. I think it is possible but personally I wouldn't recommend it. The plastic is soft and hollow inside. I have seen it done but I would prefer a freestanding solution.

@johnsaunders6510 4 ай бұрын

Very good video

@PhillWyattProjects 4 ай бұрын

Thanks 👍🏻

@johndekoven7549 2 жыл бұрын

Would anyone be able to tell me how tall the walls are not counting the roof? I don't understand why manufacturers just put the total height including peak of the roof which doesn't help to know what you can get in there. Thanks in advance.

@efmaxx1527 Жыл бұрын

Thank you for sharing

@PhillWyattProjects Жыл бұрын

No problem 👍🏻

@hyena-chase2176 Жыл бұрын

Love the video thank you so much

@PhillWyattProjects Жыл бұрын

Thanks your welcome 👍🏻

@milinderuchec916 Жыл бұрын

Great video thank you

@PhillWyattProjects Жыл бұрын

Thanks your welcome 👍🏻

@user-rv1qd9nm7c Жыл бұрын

I am having trouble screwing the hinges on the sides. Does it have to do that i need a good electrical screwdriver? Cause it seems that the one i am using doesnt have a lot of power. Great video... took me 5 hours and i havent finished the door cause i cant screw the hinges

@tequilaprince3630 3 жыл бұрын

Brilliant thanks for step by step how to build the Keter 6x4 all that you missed out was which code of screws to use but I sussed that out also mention it can be a fixed to the ground ……… Have you never seen the Wizard from Oz and Dorothy’s house

@PhillWyattProjects 3 жыл бұрын

Well, I actually did a video on how to anchor it to the ground now you mention it. Check it out in my video list 👍

@ihatepurolator 9 ай бұрын

Any issues with wind? I have a keter oakland 757. The plastic base is anchored to the paving slab. Im hoping the screws for the walls will hold the walls to base during strong winds.

@PhillWyattProjects 9 ай бұрын

I haven't had any problem with the wind here in UK. It hasn't moved at all.

@melaniescales7533 Жыл бұрын

Thank you so much for doing this video. We have just bought a Darwin shed and my husband is delighted that he was able to watch you assemble it so thanks.

@PhillWyattProjects Жыл бұрын

Your welcome 😃

@andrewholdsworth2198 6 ай бұрын

Hi thanks for vid, im moving but need storage quick in my current house, do you think this can be reassembled in my new house easy enough

@PhillWyattProjects 6 ай бұрын

I know that they can be reassembled although I've not done it myself. I would keep hold of the instructions and go in reverse to disassemble it.

@johnbevan6864 3 жыл бұрын

Nice straightforward job, bet you liked doing airfix kits as a kid

@PhillWyattProjects 3 жыл бұрын

I did actually I had loads of them. I had forgotten all about those until you mentioned it 😄

@jensalmon4985 3 жыл бұрын

How did you manage to screw to the base at the fence side, I've just ordered one and it will be in a similar position

@PhillWyattProjects 3 жыл бұрын

I just shifted the shed a foot out to access the side then pushed it back. No problem.

@jonbraid2520 3 жыл бұрын

Hi great, guide, I built one yesterday, but I'm unsure about the window. I'm in UK too and there's a massive black rubber seal in the kit, presumably for the window, but there is no way it will locate this on the inner and outer window frames and there is no mention of this in the instructions or in the included parts list in the manual, but I've seen some videos using self adhesive weather strip to the outer frame but again no mention of this in the manual I don't see you adding any seals or weather strip, doesn't it leak? Appreciate your help.

@PhillWyattProjects 3 жыл бұрын

This is interesting because mine didn't come with the rubber seal or any weather stripping. My window works just fine without it and does not leak. So it might be possible that they changed the design slightly but forgot to leave out the runner strip in some batches.

@jonbraid2520 3 жыл бұрын

@@PhillWyattProjects That's good to know, thanks for your reply 👍

@24ghorba69 2 жыл бұрын

Hi Phil, Thanks for the detailed video. Question: Did you not think of screwing the whole shed to the ground (paving) in case of strong wind? Thanks

@PhillWyattProjects 2 жыл бұрын

Thanks your welcome. I did anchor it shortly after this video and made a video about how to anchor a shed to it's base check it out here: kzfaq.info/get/bejne/mp2XdaeKna3Pfmw.html

@doghouse1960 Жыл бұрын

how did you get behind the shed against the fence to screw the side to the floor

@PhillWyattProjects Жыл бұрын

I just shifted the shed one one corner at a time then pushed it back.

@Micjoh 10 ай бұрын

Great Video. Helped with assembly planning. Put mine up in the volcanic heat this week. I made a 6x4 wooden base with ply and fence posts. Not impressed with the way the roof joins the edges of the apex panels. My garden is quite exposed. I ran a Bead of stixall adhesive /sealant front and back.

@PhillWyattProjects 10 ай бұрын

Your welcome 👍🏻 yea I know what you mean about the roof although mine has performed just fine without any sealant.

@Micjoh 10 ай бұрын

Just built the 8 X 6 today. Took most of the day, but doing it alone and windy with showers. The only criticism is the double doors are pointless and a source of instability. I'd prefer a single door

@charlescollins2470 4 ай бұрын

how do you fix the wall side at the bottom that you fixed that you did other side from the outside the shed also the top at the roof on that side also the same at the back as well ???????????

@cuata3m618 Жыл бұрын

Great video I have a question, is it possible to install it on a 4x6 trailer and pull it on my van to install a portable shower and portable toilet and to bring things when camping?

@PhillWyattProjects Жыл бұрын

Thanks! I'm not sure about that but there's a first time for everything It could work but I really don't know.

@kwills7361 Ай бұрын

I am waiting for mine to be delivered. By chance could you tell me the size of the plastic insert for the window? I would like to upgrade it to something I little less flimsy, if you have an Amazon recommendation to replace it with I would kindly appreciate it.

@mikebaxter2895 Жыл бұрын

How did you find fixing the roof on the side next to the fence? I am looking to purchase one of these sheds but it will just fit in the gap down the side of the house so it'll be pretty much hard up against the wall of the house and the fence. Looking at your video, which is great btw, it looks easy enough to build everything from the inside other than the long roof screws. I'd be grateful to know how you overcame this before I purchase. Many thanks. Mike

@d.h.4175 Жыл бұрын

I wondered about the roof panel too as I want to put mine against the fence. Can't see me being able to successfully screw it in place if the shed is up against a fence. How did it get attached ? Great video , very clear instructions.

@malcolmranson966 Жыл бұрын

Hi Phil, I’m erecting the same shed butting up to a fence. How did you screw the wall to the base on the fence side?

@PhillWyattProjects Жыл бұрын

Hi Malcolm, I shifted the shed out a few feet from the fence to gain access then shifted it back. I pushed it a corner at a time a few inches at a time carefully.

@robwalker9555 Жыл бұрын

How did you get the long screws into the base at the fence side? (ours will also be near a fence)

@PhillWyattProjects Жыл бұрын

I pulled it out a bit one corner at a time then pushed it back

@Patmac74 3 жыл бұрын

Nice little shed. I'm actually outgrowing the "hobbit hole" and might do the same.......... Or maybe build an extension 🤔🤔🤔🤔

@PhillWyattProjects 3 жыл бұрын

If you have a bit of free space it's a good idea keeps the clutter down. I think I will also build a shed extension at some point just for fun 😁

@paulbowman8677 Жыл бұрын

Excellent video... Just ordered one of these, will be up against a fence like yours, how did you screw the side panels into the base with the fence in the way? Thanks Paul

@PhillWyattProjects Жыл бұрын

Thanks 👍🏻 I pulled the shed out from the fence one corner at a time to get the screws in. Then pushed it back.

@chrishouse6924 11 ай бұрын

Thanks for the vid, of the screws into panels are they supplied, and on instructions, or just something you added to beef up?

@PhillWyattProjects 11 ай бұрын

All the screws were included.

@alisonrobinson6287 Жыл бұрын

How did you add roof near fence and how did you drill base near fence . Can it be built then moved to position

@PhillWyattProjects Жыл бұрын

I pulled it out a couple of feet from the fence then pushed it back afterwards. Just pushed one corner at a time.

3 жыл бұрын

Hello my friend. A beautiful hut for the garden. The assembly of the composite garden shed is successful. A beautiful view in the garden and a hut that will come in handy. Congratulations. See you. I wish you a healthy and beautiful new week. Big greetings...

@PhillWyattProjects 3 жыл бұрын

Thanks very much. Now I just need to get all my stuff into it!

3 жыл бұрын

@@PhillWyattProjects 👏👏👏👏

@ravenmaster6364 2 жыл бұрын

Great video, weve just bought one of these, guess what im doing at weekend?!!! 🤣

@PhillWyattProjects 2 жыл бұрын

They go up quite quickly. A good weekend project 😃

@ravenmaster6364 2 жыл бұрын

@@PhillWyattProjects Hi Phil thanks for your reply 👍👍 ive just got the window and the door to do now, cleared the area, laid the flags, bad light stopped play! but yes its been a pleasure to build 👍👍

@daviderigotti7665 2 жыл бұрын

Great video. I’m planning to buy the Darwin 68, but can I place the shed directly on the ground (grass) or is it necessary to have a solid base?

@PhillWyattProjects 2 жыл бұрын

I recommend a level base.

@gazookerman1328 2 ай бұрын

Well explained, but can you tell me if there are pilot holes or indicators as to where all the screws go into the panels etc..? Thanks

@PhillWyattProjects 2 ай бұрын

Hi yes there are little marks.

@user-oz1tl5on6x 3 жыл бұрын

Hi, wonder if you could please supply the door opening dimensions? Can't find them anywhere. Many thanks.

@PhillWyattProjects 3 жыл бұрын

Hi the opening is around 67cm x 172cm.

@exmodel44 2 ай бұрын

So how did you attach the gutter rail on the side facing the fence as it would have to be moved out in order for you to get to it I presume?????

@PhillWyattProjects 2 ай бұрын

Yea I assembled it out from the fence then pushed it back one corner at a time.

@billhoggy4461 2 жыл бұрын

Great video of to buy one on pay day .are the packets of screws marked for what part they go in

@PhillWyattProjects 2 жыл бұрын

Cool! Yes they are all labelled clearly.

@brianpoole6464 3 жыл бұрын

At 12:16 you started to screw the base into the frame....but how did you manage to do the other side, as it was butted up close to the fence?

@PhillWyattProjects 3 жыл бұрын

Hi, yea for that part I pulled the shed out about a foot then pushed it back after the screws went in.

@lukasplx9330 10 ай бұрын

Hi Phill, please how did you manage to get the concrete around and between the prefabricated concrete slabs? It seems that everyone is putting edging stones around them to hold the slabs in place and I find your solution much easier. Thanks in advance

@PhillWyattProjects 10 ай бұрын

Hi, I mortared about 1cm of cement between each slab and a few centimetres of mortar around the edge. It's been fine ever since. Edging stones I guess would be even better although I don't think it is necessary for a small shed base.

@SBBUK Жыл бұрын

Hi did you get a piece of rubber with yours? Mine was holding the window together in transit. Should this be used somewhere? I can't see any mention of it in the manual. It looks like a seal for the window.

@PhillWyattProjects Жыл бұрын

I didn't get any rubber with mine. It could be just packaging? My window doesn't seem to need any rubber seal.

@sergioalfaro7409 7 ай бұрын

Hey. How did you get the roof up on the side closest to the fence? Looks like a tight area to do so.

@PhillWyattProjects 7 ай бұрын

I assembled it out a couple of feet from the fence then moved it up closer to the fence afterwards.

@adammirza714 2 жыл бұрын

I want to use a plastic grid base for this shed to sit on. How important is it that I fill in the grids with gravel, or can I leave it empty?

@PhillWyattProjects 2 жыл бұрын

I think it is important to fill in the grid with gravel. It will made the base more solid with better drainage and a better chance of being level.

@robertosanchez3050 2 жыл бұрын

Thank you

@PhillWyattProjects 2 жыл бұрын

Your welcome 👍🏻

@charcoal386 2 жыл бұрын

What did you do about not having access to the other side of the shed. Did you push the whole shed out

@PhillWyattProjects 2 жыл бұрын

Yea I pulled it out a couple of feet one corner at a time. Then shuffled it back. It was pretty easy one corner at a time.

@SueBridgland 24 күн бұрын

Very helpful but how did you manage all the assembly on the back, particularly screwing the base to the wall panels. Did you have to move the shed?

@i.g.g.9989 2 жыл бұрын

Thanks, is a good video...

@PhillWyattProjects 2 жыл бұрын

Thanks 👍

@dimashbox 2 ай бұрын

Have you fastened the shed base to the paving slabs with any anchors/screws to secure the whole structure against strong wind?

@PhillWyattProjects 2 ай бұрын

Hi, Yes I have anchored it to the slab base I made a video about it. It's been up 2 years now with no problems you can watch the video here: kzfaq.info/get/bejne/mp2XdaeKna3Pfmw.html