ATV CARBURETOR RUNNING RICH

No video

ATV CARBURETOR RUNNING RICH

Рет қаралды 22,904

Getting It Done - Budget Friendly Fixes

Күн бұрын

In this video ATV carburetor running rich, I tell you why I was having this issue and what I did to fix the problem. To watch more ATV repair videos, Watch this playlist I videos I have put together: • ATV Repair Videos DIY
***Subscribe to this channel: / @gettingitdonefixes
***ABOUT THIS VIDEO:
My ATV would not idle unless I kept my thumb on the throttle. It has been a trying 2 weeks with this ATV plagued with problems. So I had to continue the series, LOL and show how I fixed this issue with this video, ATV carburetor running rich.
-----------------------------------------------------------------------
***Watch These Videos For More ATV Repairs
WHY WON'T MY ATV IDLE WITHOUT DYING // Suzuki Eiger Fuel Petcock Fix
• WHY WON'T MY ATV IDLE ...
WHY DOES ATV CLICK WHEN TRY TO START IT // Suzuki Eiger Starter Fix
• WHY DOES ATV CLICK WHE...
-----------------------------------------------------------------------
***LET'S CONNECT:
Facebook: / crowelake
Getting It Done North Of 7 Instagram - / rolandnorthof7
Thank you for watching this ATV carburetor running rich tutorial!
Feel free to leave your questions and comments below, I am happy to help.
- Roland
You Don't Have To Get It Right, You Just Have To Get Going...
#ATVcarburetorrepair #ATVrepair #ATVfix
***To replay this video: • ATV CARBURETOR RUNNING...
Disclaimer: This video may contain affiliate links, which means that if you choose to make a purchase, we will earn a small commission. Please understand that we have experience with these products, and we recommend them because they are helpful and useful, not because of the small commissions we make.

Пікірлер: 49

@86250rrippin 4 жыл бұрын

These Eigers are known to run super lean from the factory. Deceleration popping ,needing choke to be on to run right,etc. Got it sorted out and its great.

@FarmDad 4 жыл бұрын

I've had good luck with my ATV repair videos taking off and really propelling my channel. Hope the same happens to you. Quality repair, bud!

@GettingItDoneFixes 4 жыл бұрын

Thanks for dropping by and showing support. I'll do the same 😊😊👍

@davidholzbaugh652 2 ай бұрын

That’s good you got it going. I have the same problem. I have taken it apart once already. Looks like I may have to take it apart again. Think I have an idle. Metering jet that is clogged. How many turns out did you go on yours ? The first time I cleaned it, I started out with 2 turns for a starting point.

@sootie620 3 жыл бұрын

Cant understand why you guys always have an issue with space to get a carb out of these machines !! Take the airbox out and you’ll have all the space you need to extract the carb, it takes 5 mins to remove yet you struggle for untold minutes trying to take it out through limited space in the frame, it’s just logic that’s missing!! 👍

@AmythaiNewZealand 4 жыл бұрын

Nice video and very enjoyed watching Thank you for sharing and big like

@mattfixit 3 жыл бұрын

I have a 1999 Yamaha 250 and I think I have the same problem as you I have a fouled out spark plug and mine Does not stay running got it for 300 going to buy a carburetor and spark plug hoping that fixes it

@PopleBackyardFarm 4 жыл бұрын

enjoyed this. Always love to learn more things for my farm. New friend Ruthie

@BushBasher1950 Жыл бұрын

how many turns did you do for the pilot jet? Ive looked around and only found that common practice is to fully seat the jet then back it out 2.5 turns. I did that and also tried 3 turns before stopping for the night. Wondering if you remember how many turns

@tristandavis7277 Жыл бұрын

Did you ever figure that out because I can't

@tommygrimes9240 6 ай бұрын

Great vid what size tires are you running?

@shanepren8648 2 жыл бұрын

What jets do you have in your carb ad how many turns did you end up with your pilot

@davidholzbaugh652 2 ай бұрын

Guess there is no reply

@CruzesLouisianaOutdoors 4 жыл бұрын

Cool video and channel sir...all signed up :-)

@GettingItDoneFixes 4 жыл бұрын

Thanks man, looking forward to your videos!

@trel1224 3 жыл бұрын

I have the same ATV and my is doing the same thing . I’ve cleaned the gas tank an but a new pitcock in an when I give it gas it shuts off . So it’s probably the carb huh ?

@dmo848 2 жыл бұрын

Or vacuum lines have a leak allowing air in

@dmo848 2 жыл бұрын

I'm now dealing with same issue but only when set to the on position. New petcock. WTF 😒 cleaned carb also.

@tristandavis7277 Жыл бұрын

Is it the jet screw thats in front of the throttle valve

@Matthew_Gotchal 5 ай бұрын

May be commenting a little late but what does a lean plug look like and sound

@GettingItDoneFixes 5 ай бұрын

the head of the spark plug will look white/light brown

@exclusivemensgrooming3176 3 жыл бұрын

So is that the reason why it would over heat the fan on my atv 450 Yamaha I t’s not working so I’m guessing I have to change carburetor before I change the fan ?

@DMan-hg2bt 3 жыл бұрын

Hi I have a attic cat four wheeler and I primed it anxiously to much and forgot that I already had it running that day so it wouldn’t even turn over and I looked at the spark plug replaced it it was to rich but my new one hasn’t worked either any suggestions

@That4.3Sierra 4 жыл бұрын

Hey. I was wondering if you did a video on how to take it out and apart. I have the same model and today when I went to start it, it ran for a bit but as soon as I came to a complete stop it died and wouldnt start back up. Still wont start. I just dont know how to fix it and I cant find videos on these models. I definitely noticed it was running rich and the float would get stuck open. At least thats what seems to be happening because it keeps flooding itself

@Sunshine-dz5uc 4 жыл бұрын

Good video. I was wondering if you could see the link in my page with my ATV issue. Tell me what it is thanks.

@cookingwithtera6308 3 жыл бұрын

What was the fourwheeler doing ?

@cyndihungerford271 11 ай бұрын

I have a 2003 Yamaha Kodiak. Float got stuck, I freed up & now it's running rich after not using for a bit. I'm widowed & need to fix it. What can you do to help me???

@GettingItDoneFixes 11 ай бұрын

May the carburetor jets need to be adjusted

@Evan_briden 10 ай бұрын

Check if needle is sealing

@ozzmann3217 3 жыл бұрын

Any ideas why my kawi prairie 700 is lean I used one of those rebuild kits off amazon which did not show sizes I got the dyno jet kit all was well with the base jets they suggested but when full throttle I pop and shoot sparks from exhaust which was my issue before it seems to idle and low to mid range be fine but full throttle it sputters and pops flames not smoke not sure what else is causing it to run lean because the other components are all good maybe need to fatten jets more ? Idk I’m new to atvs and little motors

@dmo848 2 жыл бұрын

Spark arrestor needs to be cleaned I think. Honestly never pulled 1 but that's sounding like what needs to be done though

@chrisolsen8063 3 жыл бұрын

How many turns on the adjustment for the carb to help it not run rich Just got a 2004 articat 400 Only 200 miles been stored in climate controlled garage Carb seems to be clean but won't go over 20If I take the airbox off it runs full power

@GettingItDoneFixes 3 жыл бұрын

I believe it is 1 -1/4 turns

@aubreyhayes2117 2 жыл бұрын

My Honda has been back furring and the carb is putting what is that a sign of

@Evan_briden 10 ай бұрын

Rich or lean. Check plug is it black?

@bethbrophy2300 3 жыл бұрын

So I have changed the fuel petcock taken the carb apart and cleaned it I am trying to get my dad's eigar going and am having no luck at all. I bought the carb rebuild kit changed all the Jets. It used to fire up and only idle when I pressed the throttle. Now it won't start at all. The rubber diaphram in carb is fine. I don't know what else to try I have spark. Any thoughts?

@farmerkid5516 3 жыл бұрын

Compression or timing

@scottfrye7956 Жыл бұрын

It's the flywheel magnet

@hurstshiftin9873 3 жыл бұрын

One issue with these carbs is the choke plunger wears and leaves it rich with choke totally off. Horse shit to work on anything without stripping the whole machine last atv I buy stick to dirt bikes.

@SaucysCreativeCrochet 4 жыл бұрын

How long have you had this? Possible time to convince Beth a new toy in the near future? (Lol Sorry Beth I had to say that lol) ❤️😁❤️😁

@GettingItDoneFixes 4 жыл бұрын

Haha it's a great idea but I have a connection to this one. It's a 2004. We've had it almost 3 years. Bad streak of luck, but its giving me content and ulcers lol😊😊

@SaucysCreativeCrochet 4 жыл бұрын

@@GettingItDoneFixes oh I didn't say get rid of this one!! You can do content of a full overhaul! And then pass it on to Beth or your son's!! Lol ❤️😁❤️😁

@johnmartin9318 Жыл бұрын

I need to do that but on a

@johnmartin9318 Жыл бұрын

On a snowmobile

@maniacfitness4578 4 жыл бұрын

I have the same exact bike and its making that popping noise when I get up to 30mph you think its the carb.....needs to be cleaned

@GettingItDoneFixes 4 жыл бұрын

Sounds like the carburetor. It could be running too rich

@ryanedwards25 3 жыл бұрын

When you say it was making a popping sound, do you mean like an air bubble popping or backfire popping? I have an automatic and when I let off the gas it makes a hard air bubble pop noise......any idea why?