Thanks so much. This video inspired me to pull the carb. Took it to a friend who has a carb bath. Runs like new!

Easiest way to take off the carb is to take off the fuel tank and covers. Easiest way I've found. I had the same trouble with my 2005 vinson. It wouldn't idle and mine turned out to be the o-ring on the air fuel screw. It had dried out and wasn't sealing. Be careful not to lose the washer behind it as the screw will tear the hell out of the o-ring. For my vinson the magic number for the air fuel screw is about 2.5 turns out from bottom. Pretty simple little carb, but can make you mad as hell too.

Good video helped me with my idle issue.. Only suggestion is to not use WD-40 on o-rings i. It dries them out- use Ballistol or hydraulic fliud.

Thanks for the video. Perhaps use something like napa sil-glyde or vaseline on the o-rings instead.

Good video

I got a sonic cleaner & boy do they work good

Shame you didn't show the rebuild. Ie float adjustment. Idle. Etc.

Please help /. Where does the long hose go. About min 3:04. You can see it clearly.

That bottom screw you turned out 1 or 1 & half. Is that the fuel mixture ?