Personally I would have taken the A4 convertible. That has the strength built into the floor.

What a great job! Looks really neat. I like the tailgate section. The curve to it really compliments the rest of the car. Sweet metal work.

I was waiting for the Audi emblem to be mounted on the back!! :'(

Très beau travail, vraiment impressionnant mais quel gâchis car la a4 avait une tres belle configuration, elle etait tres belle.

It even looks stock! 😂😂 this guy is Ridiculously creative! I love it and it doesn’t even look bad

Whooooaaa!!!! Dude, you da man! That is without a doubt one of the top three builds on YT (I'm not talking about the proshops here, just backyard stuff.). AWESOME! It must turn heads like crazy!! Cheers

Need my A4 transformed into this. Absolutely amazing!

All I can say is good job, the end product looks great! Wish I could have/make one of my own

Really liked the way the bed still resembled the lines of the original A4 I know some are saddened because it was perfect before but I understand the motivation Very nice work looks very cool I would love to have one I have a tail ended Jetta TDI I'm considering doing the Smythe bed on The audi is a bit more fun looking

Eu não faria, mais ficou exclusivo. Parabéns pelo trabalho.

An Audi Ute! Great idea 👍 You now have a one-off that not many will have. Sustralian culture in N/A 👍

Oi mate, you made one bloody good looking ute there. Cheers!

Nice work. What kind of rear end? I'd also think about the structure and atlieast put two bars from rear wheel arches to the top of the roof

Audi should have been designed and sold a midsize pickup for certain markets. Awesome build. Excellent craftsmanship and attention to detail.

It works better if you do it with a two door instead of a four door. I also found out that once you cut the top off, you will need to add more support to the under body to keep its rigidity. Most cars now are unibody so once you remove the top, it's very weak in the middle (the first bump you hit, you won't be able to open the doors!) I've done this to a Ford Pinto wagon, (Pinchero) which looked pretty cool. And I also made a little truck out of a Chevy Citation ("Camino") It's fairly easy to do with some body shop skills. If you cut it just right, you keep the taillights and rear portion, but you won't have a tailgate (didn't really need one anyway) The rear window on some cars will actually fit behind the cab too, so it looks factory built.

I love how he designed the rear with the tail lights it looks right at least on video , good one .

wow looks freaking sick. Haters going to hate, but the time and work you put into this, id say it was WELL WORTH IT!

That’s a ultra sport b6 !! Why 😱

Nice job! In Brazil already have this small pickup: VW Saveiro, Fiat Strada, Chevrolet Montana, et all.

Te felicito 👏👏👏👏,te quedaron muy buenas proporciones.

EXTREMELY COOL! HIGHLY WELL PLANNED AND DONE! CONGRATULATIONS!

Parabéns que trabalho incrível parece original de fábrica

Very good!!! Tengo un Chevy Malibu 2000 y quiero hacerlo camioneta, estaba indeciso pero con tu vídeo, ahora sí comenzaré a realizar el prollecto. Buen trabajo amigo !!! Saludos !! Desde México !!

great, I am so impressed with your work skill,smart man

Excelente trabajo, muy prolijo, saludos desde Argentina !!

I think we need to recognize all of the effort that was put on this car. Kudos for that. Now, just in my opinion, the fact that you can do something doesn't mean that you should.

Show man .....welcome tô Brasil

THE BEST LOOKING AND BEST MADE CONVERSION IVE EVER SEEN !! AUDI SHOULD BUY THAT DESIGN FROM YOU..

great job, my hat of to you for taking the risk!!!!

Amazing transformation

Wow... i mean wow. Okay the taillights not fit perfectly i think but the rest....wow. And thanks...now i want also an audi Pickup xD

Супер тачка! ! ! Мне очень нравится такая тачка, удачный проект. Тоже хочу сделать себе такой же. Автору респект и большое уважение за проект. Поддерживаю его тему.

Impressive result, but as far as I could see, everything is attached by screws and rivets and made of Aluminium and glassfibre. What about the structural integrity?! You weaken the body dramaticly by removing the (half) roof unit and the C-PLR. In addition, if you are carry some load on the deck, you will get a banana 😂😳🙈

Good build like the way the tailgate matches the contours of the lights.

I like it looks good nice job

Ideal para sair por aí catando umas reciclagens, cabe muito papelão e ferro velho, aqui em SP tem muito chevete modificado assim kkkkk

Awesome! great idea! you could well do it basically every car. to transform it into a pickup.

I don't get all the people crying in the comment section. The owner can do what he want's with his car and also Audi A4's aren't rare so not much is lost. This is a cool project and it's nice to see something different every once in a while. I'd say this is something quite refreshing to see at least for me. Also just to clarify, I don't know if i'd do this myself because the structural integrity is weakened but it's great to see someone had the courage and will to make this a project.

Awsome work! Looks realy great!

Now I want one how much would it cost to get something like that done to a Audi

But why???

Brother this is sick I love the project I was thinking of doing something like this as well now I know I will hahaha very sexy car well truck

love this but not sure if the car deserved to get chopped it looked good at start as well but hey man its your whip do as you please I loved the work you've done 😍👌

Thanks for sharing. I drive an Audi TT and also have a '08 Ford Ranger. Would be nice to have both worlds and you showed it can be. Chevy, Ford or even Dodge needs to bring back a car based unibody small "compact" pickup.

From audizine, to instagram, now youtube? Best build ever!!!

That was beautiful great job shows a lot of talent you should be proud of yourself

I miss my old rabbit pickup , and I'm waiting on my kit for my mk4 Jetta. But an Audi? heh, that's luxury that only the big 3 can only dream of with these new 70-100k pickups. They can't even come close even if they used rich Corinthian leather. Hope you had a blast building it! I have some ideas for customizing mine a little , but I'll see how full my hands will be with the basic build.

This Looks great! How did you get stabiliy back after removing the roof?

Looks good but you weakened the shell. This car doesn't have a separate chassis the complete body holds the strength. Rear of the roof down to the inner rear wheel arches has no support. Car will buckle in time.

"WHY!?"-me and other mechanics watching this video. On the other hand great workmanship and a clean result you have some great talent but an Audi...dude.

Wow there's a lot of hate in the comments for some reason? I like it you did a good job.

Love the look of it , I help run a group on Facebook called , Just Audi Avants in the U.K. , and am also a member of b6uk , I drive a red 2004 1.8t bex S line Avant, that did look in mint condition

Wow ! That's so good I'm disgusted! Great skills mate!

i Love it

That's freaking awesome. Nice work!!!

Riveting in the panels , yea it's strong. Lay down a bead of 3m metal panelbond adhesive and watch those panels act like they are welded in. Awesome stuff and that will take chassis rigidity to the next level.

That was an audi in really good shape.

Was gna do this with my 1996 jeep cherokee classic. Was a 5 speed manual, 2 door , 2x2. Poor girl ended up totalled before i could tho 😢😭. But this, this turned out nice. Not tacky either. 👍👍👍👏👏👏👏👏👏👌👌👌👌

Looks awesome, great work, The way you put the the braces in and the way you built the sides looks like it probably is more rigid than before. The naysayers are the fools. Thanks for sharing, Now get over to Home Depot and pickup some materials to finish the wife’s honey do list. Lol....

Tbh i wouldve gone the extra mile and tried to let the backend look like the c6 a6 facelift limousine. Wouldve looked alot better. And maybe tried to work with more OEM parts in general, such as the back glass for example. And i wouldve used bedliner for the bed. But other than that: great work! But next time, use a rearended a4 for this kind of project lol...

now you can take ur cousin to the drive in for sure:DDDD

Looks good. How do you get to the spare wheel?

I like that. Another vehicle that would make an interesting conversion would be the Crown Victoria or the Mercury Marquis as the platform essentially ran for over thirty years, they are well proven in untold millions of miles of harsh service and the buy in is quite modest. Too, a company named JVC or Japan Victory Company (or the like) made a fiberglass bed for a 91/96 Chevrolet Caprice several years ago and Superstepside made a fiberglass bed for the GM (Caprice.....) "box body" Cars. The possibilities are many.

What measures were taken to strengthen the chassis?

falta que diga Saveiro jajaj buen proyecto :)

Soo much hate lol, i personally love it, amazing amount of work, way more that i would ever trust myself to do. Drive the wheels off of her good job!!

Well I gtotta say, it exce3eded my expectations in every way. When you started I thought you were ruining a very nice Audi. And you did. But then you unruined it. And I am now about to go have some crow, maybe a slice of humble pie for desert. AMAZING workmanship my man. Fantastic job. You should be very proud.

The company that manufactures this kit has a whole section on their site about structural integrity and safety, everyone who’s worried should go look up Smyth Kit Cars.

Theres no significant lateral structural support added, I dont see how you will be able to put anything remotely heavy in the bed and not have the whole floor of the vehicle bend into a U with a big speed bump.

God I fucking love these ute conversions! I just wish I had the ability to build something 1/4 as good

действительно идиот, такую машину испортить.

What is the name and seller of the tie down track at 5:32? Thanks.

the guys who had crappy comments, are the same guys at a baseball game with a beer a bucket of popcorn your gut hanging out and making fun of the guys on the field you never ran anything but your mouth. I love it buddy Keep building stuff!

Excelente manera de destrozar un audi a 4.

shape really suits it. top build

where did you get that kit parts for the tray? (at 1:18)

First gut reaction was 'dear lord why!?' but by the end... it wasn't that bad. It reminds me of those Holden utes

Now all you need to do is jack it up about six inches and put some off road tires but very nice job man!

good idea trying this concept on that b class first b7 are cheap and I think it turned out great!

Who makes your body panels reason why I’m asking i need some made

How did you strengthen the body?

I would have done it to a different car It was clean 😭😭

Why?

Nice El Camino ya got there!!!

Круто👍 очень пикап понравился

I'm really curious to know what you did for a radio antenna? With the shark fin, rear, window, and rear roof gone the factory active antenna system is all gone. I keep thinking I need to buy a beat up B6 S4 and do this lol

😎👍👍

Reminds me of the time i CRUSHED an A4 in my old 90 Taurus sho. Got another, when shes running... Its time to go A4 Hunting...

Looks better that you would think and congratulations for thinkin out the box and doing something normal folk never think about

La verdad no lo veía bien. Pero en lo que se convirtió la neta está súper fachera! Agreguen el símbolo Audi a la puerta de atrás ;)

Looks much better like that than as a sedan. More useful too. In europe I think you cannot register a car like that.

I felt sad as you cut that beautiful car but in the end I saw that a nice truck was left 👍

True Tradesman beautiful work

Nice. Keep it in garage all time;)

Great job

Nice

wow much haters in comments, thats when you know you did great ! , well done!

VW makes a Saveiro pickup, just import one of those.

It was more easier if you just had taken a cabrio dombo's. And another think now you have the pickup instal a RS 4 engine and you accomplished your mission.

Also, where'd the gas tank go?