Audi A6 C7 Front Coil Spring Replacement

Рет қаралды 18,199

3 жыл бұрын

In this video you will find helpful information/instructions and tips on how to change the front suspension coil springs on an Audi a6 (c7) 3.0 TDI SE,
Please let me know if you have any questions in the comment section below.
You can really help the future success of my channel by clicking the link below to subscribe, it's free and I will greatly appreciate it!
kzfaq.info...
Special tools required:
Spring compressors:
ebay.us/P6TFul
amzn.to/44oMhHU
amzn.to/3DaR6sH
Parts used:
Sachs Coil Springs
ebay.us/81UvSs
amzn.to/3JXb7Xw
Support the channel:
/ ryansworkshop
Safety disclaimer: Ryans workshop is not liable for any harm, injury or property damage incurred while carrying out repairs or replacements, that are a result of incorrect use or misinterpretation of the provided information.
The user is personally liable for incorrect use of repair equipment, tools or car parts, in particular, when this use poses the risk of injury.
Ryans workshop strongly recommends being careful and adhering to the safety rules when doing any repair or replacement. Keep in mind that using low quality auto parts does not guarantee the proper level of road safety.

Пікірлер: 29

@RyansWorkshop 2 жыл бұрын

You can really help the future success of my channel by clicking the link below to subscribe, it's free and I will greatly appreciate it! kzfaq.info

@daniellandqvist 5 күн бұрын

Thanks for an excellent video. Views, voice, explanation is just all perfect!

@davemac3171 Ай бұрын

I just completed this job on my 2012 a6 c7. Your video made it very easy thank you

@RyansWorkshop Ай бұрын

Glad I could help 👍

@reverevere Жыл бұрын

Exactly the same thing happened me, I also have it caught on cctv snapping while parked up. Exact same location as yours, bottom of spring. Thanks so much for the video!

@RyansWorkshop Жыл бұрын

Yeah it seams to be a weak point, glad I could help though

@GeorgeAdventure101 Жыл бұрын

Many thanks !!! With your help I saved £120 💷👍

@RyansWorkshop Жыл бұрын

Glad I could help

@mickdrake7431 3 ай бұрын

Excellent video, Im half way through the job before looking at this... almost got it right just didn't remove the bottom arm from the shock!

@RyansWorkshop 3 ай бұрын

Happy I could help

@ossitosi2814 2 жыл бұрын

Thanks for the video! -from Finland 👍

@RyansWorkshop 2 жыл бұрын

No problem 👍

@vytas6026 2 жыл бұрын

Very good detailed video. Thanks.

@RyansWorkshop 2 жыл бұрын

Thank you

@tigervieh1548 3 жыл бұрын

Hey, thanks so much for the Video! Mine also is broken at the same Spot like yours last night.

@RyansWorkshop 3 жыл бұрын

Thank you, yeah it does seem to be a common fault on the a6

@tigervieh1548 3 жыл бұрын

@@RyansWorkshop Maybe, 331.000km in 9 years, it seems to be ok ;)

@marekk8790 2 жыл бұрын

Great video mate 👍 well done. My springs snapped yesterday 😳 one of them snapped when I drove the car through a pot hole and the second one snapped when the car was parked not been used.

@RyansWorkshop 2 жыл бұрын

Thanks mate, glad I could help

@lukpascal Жыл бұрын

Excellent video, can I get advice from you please? I had replacement of shock absorbers 2weeks ago I have done 300miles. My wheel arche is 5finger from tyre. Car is extremely high now. Garage saying they got correct shocks. What do you think?

@RyansWorkshop Жыл бұрын

Thanks, and the shock absorbers shouldn't change the height of the vehicle unless they are fitted incorrectly, New springs could potentially change the height due to the olds one's getting weaker over time and sagging

@lukpascal Жыл бұрын

@@RyansWorkshop many thanks!👍

@f4m0u582090 3 жыл бұрын

this happend to mine yesterday, appears to be same spot

@RyansWorkshop 3 жыл бұрын

It appears to be a common fault with the A6

@anma700 Ай бұрын

Great video but I am struggeling, I have an A6 C7 but not sport so my springs are alot taller (almost 5cm). First I thought I got the wrong springs but they are aproximate the size of the broken ones (millimeter difference). I had to compress them alot, about 5cm to get the bolt on the shock back in place and now I am at the situation where I cannot get it back in place using you method. I think the only way for me is to remove the upper controlarms but that is no easy task it seems like. Taking a break right now and pondering any options but cant see any yet.

@anma700 Ай бұрын

I somewhat retract my comment, It was not possible to get much, if any movment of the shock with the spring compressors. I had them as tight as possible but the end started to touch the top. But what I tried was to lift the car as high as I dared and then used a long (2,5m) prybar get the controlarm as low as possible. Possibly some bushings that did not like that but they need to be changed anyway. Still was a fight with 0mm to spare but made it. I actually clamed the prybar down but if I have had help it might have been easier and a bit safer. Also had a prybar on the spring to get some movement upwards on that, might have been the last millimeter that made it. Anyway, happy now, atleast a few minutes until I start on the second side.

@deltaa5performance749 10 ай бұрын

Can we convert A6 C7 4G air suspension variant to a Shock- Coil spring suspension?

@NewLightEnergy 4 ай бұрын

It can be done as they have the same mounting system. The old allroad had it done dozens of times. It’s funny I was think of going to air and away from spring since my spring just broke.