I'm so glad you finally bought something to drive home. I was just about to unsubscribe because I was kinda burnt out on seeing only walk arounds at copart. Sorry the mustang blew the transmission. I think it will be an awesome car once you get everything sorted out on it. Anyway please do more of these type of videos. We love seeing them even when they don't go well. Love you randy

Get the feeling maybe it was Dad's Mustang he bought new, which at some point became Junior's Mustang but the title wasn't transferred.

2 things on removing the transmission. 1. To get the top bolt on the starter out you will need a couple of long extensions, a universal joint and feed it in under the A/c compressor over the motor mount and on top of the starter. It’s a bear and there is a chance if someone took out the starter before they left the top bolt out. 2. Once you remove the transmission crossmember, put a jack under the front of the oil pan and jack it up causing the trans to tilt down some. This will make it soo much easier to get the trans back in and not have the firewall interfere while sliding the input shaft thru the clutch disk and into the pilot bearing. Good luck and enjoy. PS. If you don’t have a transmission jack I use two young men to pick it up and slide it in or out.

We enjoy seeing you work through and fix the problem and out the car back in the road. Throw out bearing can be replaced. Had it happen to me. Drove it 15 miles to my mechanic by power shifting without a clutch. Started in 1st gear, when up to speed put pressure on the shifter until it pops into 2nd, repeat for 3rd. Have to let off the gas pedal when power shifting to avoid grinding.

Cool. I’m stoked to watch the investigative video into the transmission and also the resolution video. I’ve always thought that body style looked good, hopefully it goes back together and works great!

Love the videos Randy, I won 2 cars so far this yr for 500 bucks each, both of them came out as a win !

Love these style of video, good stuff Randy.

I love the videos man you do a great job at what you do I have been watching you off and on for a couple years you do a great job thanks for the content keep up the good work

Randy: LETS DRIVE IT HOME Every Transmission-Related Part In The Engine: ARE YOU SURE ABOUT THAT

I like the Mustang, glad you ended up fixing it!

That's awesome! I really needed a good laugh 😂😂.

I'm sorry Randy but as soon as you said uh oh...and that loooooooong pause of the car struggling and THEN the cut out to you panting i busted out laughing because i knew EXACTLY what happened and what you had to do (same thing happened to me years ago with a 95 Civic EX). That was a good laugh. I hope you get that mustang fixed soon buddy!

Looking forward to more Mustang videos! That Apple Watch is becoming a regular character on the channel! 😂

Seeing you at stop light then catching your breath at Braums was exciting to watch! Nice

Showing the genuine reality of risks taken by everyday new buyers. Great content!

I'm in the middle of an AOD to T5 swap on my 95. Good video to learn from, and always remember to make sure you install the right speedo gear and throwout bearing correctly 😅😅

Your lucky to have a shop. I have been replacing a transmission in a Honda minivan in a parking lot and people say I don’t know what I’m doing

Thanks for this video Randy been looking forward to it, cant wait to see it all cleaned up as always a great video

Awesome Can't way to see. I'm doing the transmission in my truck kind of stalled due to I'm to busy but it's OK I don't want drive it in the upstate NY salt.

Great video and content😎🔥 Never wrong with a V8 car💪

Hey Randy thrilled with the daily doubles. I can’t figure out why in the heck did you drive that Mustang home? Why didn’t you Use your trailer in the first place?

Can't wait to see the clutch out.

Randy: because I know how to work on cars. Siri: sorry can you say that again! Me: perfect timing 😂

i love how the Siri from your Apple Watch just interrupts and you just go "ugh not this sh*t again..."

I’m excited for this project Mustang.

That deck system looks BA. If I get a truck I'll look em up!

That looks like a great project 😎

More of these vids please, actually working on cars not just looking at them 👍

Can't wait to see you working on a car again.

Wheres the stang at lol, not mad just curious, love the content man keep it up, I have three of those body styles and love them even though one has some bad front end damage, I'm hoping to fix it up and throw a 5.0 in it but not sure just yet..

I've been waiting on this video. I can not believe no one helped you !!!

I love mustangs good luck buddy

Happy Saturday Randy 👍 thank You for your wonderful content 💯. Can't wait to see what's up next!!👌👌

Don’t worry about the ABS or Tracton Control once you get the terminals cleaned up. The trans is toast. Good luck 🍀 BTW you may have racing components for the transmission sounds expensive.

Reprogramming the ecm might fix the over drive light

My 98 Mustang GT made that same noise a few years ago and I heard a clunk and I saw something shiny fly out from under the car and went into the ditch. I was able to drive it home. It turns out that the main drive pulley that turns the serpentine belt is a two-piece and the outer piece had separated. Yours, however, is more likely the clutch. Still, you got a good deal if it's only the transmission. I think those wheels may be Cobra-R's. Clean it up and get that rear fender fixed and you've got a car that is only going to appreciate in value.

Finally this vidéo :)!

Sounds like the clutch came apart.

The jenkie drive home in the hooptie was dramatic.

that noise sounds almost just like my vortech blower on my fox body!lol

This is a great SN95 Mustang - ok it needs work but it will be good! Good luck with the GT 💰💰

That’s normal for the clutch In them cars. That’s the throw out bearing . Those are bullet seat Rovos rims very nice

Love those new edge mustang's they look so good when modded right like yours. Looking forward to this series!

I had a 2002 mustang GT that had the exact same noise...it was the transmission, I couldn't complain though since the car had 225k miles on it

Keep doing these vids I was tired of all the walk arounds

The R on the rims might mean: Roush . As in Roush mustang. Throw outs are bad usually from dumping the clutch and burning out.

Great video Randy!! This is the stuff!

this is gonna be good

Hey Randy I had that year mustang they didn’t come with white speedometer wonder if they switched it with one from an automatic

With the speedometer being way off like that, the vehicle more than likely has less miles than it says on the odometer. It was racking up miles just in that short drive before it broke.

Lol those seats came out of a second gen mercury mountaineer. I have one with the exact seats

That’s a mean sounding mustang right there, can’t wait to see more content with her!

Great car, gotta fix the clutch/gearbox and see how it runs. I’m sure the engine issues would be something to do with the ecu. 🇦🇺🇦🇺👍👍

Nice car ! Makes me glad I paid $4,000 for my 2004 Mustang GT Convertible with 5spd. Mine was well cared for with no leaks. Mine has 150k miles. I did have to replace the Rack and Pinion that was shot @$1,000. Mine is RedFire with black top and charcoal leather...

Wheels are rovos they're a pretty popular upgrade for new edge cars. Fairly pricey as well.

Th rovos wheels for the Mustage range from 250.00 - 300.00 a wheel

Randy you should install a set of those bumper guards like the cops have on your RAM so Jessica can push you out of those stall out situations to a safer place. Pushing those cars manually like that you're gonna end up in the hospital.

15:07 randy im dyin lol

The speedo is crazy

You blew out the clutch disc, damaging the flywheel. Replace the clutch disc, throughout bearing and resurface or replace the flywhee.

Get wit see what you going to do that car up bud

Good Afternoon My Good Little Bro Randy Lee Shear Of Auto Auction Rebuilds

Mustang doing Mustang Thangs

Much love from Kenya

Oh yeah baby !!!! SN95 time !!!! the best looking model of these pony cars Randy this is the perfect opportunity of a car to mod and do even more , I'm sorry to the situation of the trans but remind yourself now its your call randy if its just the clutch and assembly or the trans needs rebuilt or you goin' to replace it with another manual or auto , now HEAR ME OUT PLEASE!!!! Randy if the trans with whatsoever or just your rebuilding this one better stick with this and upgrade the trans you know make it better more sturdy and enough groups out there to rebuild and upgrade your Transmission i'd love to go that route now also Randy with all this done to it you got to tune it Randy , it will help it run better and smoother and don't forget to service everything including the cooling system , intake manifold etc. This will be a car of profits by video and physically the car itself you ain't gonna lose on this one so you've got enough room to have fun with it . Lovin' the content , especially this was an excellent video , Stay safe TC , God bless !!

Time for some go-fast parts! A broken part is an opportunity :)

Rovos SVE NVX wheels about $230 each. Very nice.

Would you mind finding and restoring a Suzuki Forenza

Well done randy will be waiting for the next content on this car , Love the way you think , Stay blessed man

Randy: "It's just going to be me", Siri: "WHATABOUTME!!!11!!1!"

Cool guy randy.

Omg it’s funny how Siri keeps going off in your videos and this time you got sick of it lmao my Apple Watch does that too it gets annoying sometimes

The rovo wheels alone are like $1500. Clean car.

The way u sed I gota get off the cheese burgers I fucking felt that lmfao me and my son had to push my caddy and I just about died hahaha

I love this car,i would love to have one of this on Portugal and give him some good love. Restore and go drive sometimes and give many love.What a nice ride.

Do what I do: work out, eat the cheeseburgers anyway. Can't wait for the limo!

I would keep this car once it’s all fixed, definitely a fun ride maybe a cheap replacement for the hellcat lmao. Would definitely love to see it stay on the channel, keep up the good content 👍🏻

Cool video, good stuff to enjoy in the future😀

Hey Randy why you at the rental house didn’t u move out

Put a nice racing clutch Randy they are like $350ish range for a puck clutch for it. I think u should do nice clutch and a blower on this one with custom tune to have some fun for the channel as you usually take a loss on cars like this might as well have fun with it make it fast and with ad revenue you will make your money back plus more and people would pay more for car if it has blower and fast . It would be fun to see a build series too on this mustang

What do you end up doing with these cars. I'm new to Chanel. Doesn't seem like you have more than 1 or 2 videos per car. Just curious. Like the Chanel.

🤦🏾‍♂️🤣🤣🤣 Your watch called cap! #Drysnitch Love you bro 💯

It’s a good looking mustang and the wheels are really nice. It’s definitely been abused as most pony cars are. I would have loaded it on a trailer and brought it back to shop and fix it

Cobra r wheels stang looks good worth fixing and keeping

What those rims are are RTR rims they're expensive rims usually found on RTR Mustangs

15:11 this is me when I get out of the gym after a one hour workout. Yeah I’m out of shape.🤣🤣

Who did you pick for the Mitsubishi

16:40 does that count as a lumpy idle?? lol

Randy, heads up that you can probably code out that overdrive light. If the Autel won’t do it, I’m nearly certain you can change it in the PCM in A program called FORScan which is really cheap. Maybe $20 with the adapter and software on eBay or Amazon.

It doesn’t have an automatic transmission it doesn’t have a manual transmission it’s got the old Bluetooth transmission

“Hey buddy, i think you lost your transmission a couple miles back”

may need a canned tune to remove the auto from the pcm. cant imagine it would run correctly while searching for an auto trans.

If the transmission is shot I’d just get it rebuilt it’s relatively cheep to get those manuals rebuilt

Absolute GEM, of a video Randy!! Sometimes......car video's make life smile on KZfaq!! Best wishes to you man! :)

Sounds like you're getting an expensive 'education' on that Limo, Randy!

Love your videos man keep up the good work also nice stang too always will love your videos

Hopefully she can be saved.

Finally something new and exciting, its been a while.

When you sat in front of the car the noise in my headset was too much. Nice car too bad it blew the clutch ...and my ears😀

Did you check the oil?