Planetary Gear Tutorial in AutoDesk Inventor 2021 using Dynamic Sim

Рет қаралды 8,005

Күн бұрын

Great Tutorial on how to make a create a Planetary Gear Set in AutoDesk Inventor 2021. Test your skills in creating this assembly following along step by step. Once the Assembly is created we will bring the model over into AutoDesks Inventor Dynamic Sim and add joints to make the gears function as they were intended to.
Please subscribe to the channel for more videos like this, in a variety of CAD software and if you have an idea for our next video please leave a comment below.
If you would like to get the part files rather then to make your own you can download them here:
grabcad.com/library/planetary...

Пікірлер: 3

@carloseduardojinestarojas4948 2 жыл бұрын

Hi, I really like this video i am trying to do something like that the thing is outside the simulation window if you turn the handle the gears turn?? Thanks

@MorrisonInst1973 2 жыл бұрын

Using standard assembly constraints with a drive option you can preform part of this in the regular environment. However once you go to the third layer this approach is to much for the system to handle and dynamic sim is the only solution. If you build the model with only one layer of gears as the video shows . You can then add a angle constraint to the handle part inserting plane to a assembly global plane. This will not allow the assembly to move because you have lock all the degrees of freedom, however if you right click on the angle constraint you will see a drive option. in the drive option you can set the start angle to 0 and the finish angle to 360 and run it that way.