How to change rear brake shoes on FIAT PANDA (169) [TUTORIAL AUTODOC]

Рет қаралды 26,442

autodoc.co.uk

Күн бұрын

How to change rear brake shoes on FIAT PANDA 2 (169) 1.2 Hatchback 2003-2012 [TUTORIAL AUTODOC]
Brake shoes on FIAT Panda III Hatchback (312, 319) (02.2012-...) / FIAT Panda Van (169) (03.2004-...) / FIAT Punto II Hatchback (188) (09.1999-03.2012) / FIAT Punto II Van (188) (02.2000-10.2009) / LANCIA Ypsilon II (843) (10.2003-12.2011) cars should be changed, as a rule, according to one and the same procedure.
However, there can be slight differences due to specific features of the vehicle design.
⚡ AUTODOC CLUB - club.autodoc.co.uk
Add your car to the AUTODOC CLUB garage and get personal recommendations on repair intervals - club.autodoc.co.uk/?to=/user/...
All video and PDF tutorials on FIAT PANDA (169) parts changement: download and watch at AUTODOC CLUB - club.autodoc.co.uk/manuals/fi...
❱❱ Install the AUTODOC CLUB App - club.onelink.me/d2X8?pid=yout...
📲 Buying via app is always cheaper than on the website!
❱❱ Install the AUTODOC App - interstitials.onelink.me/1036...
🛒 On our website you will find a wide range of auto parts you are interested in: www.autodoc.co.uk/?...
Brake shoes: www.autodoc.co.uk/car-parts/b...
Brake shoes for FIAT PANDA (169): www.autodoc.co.uk/car-parts/b...
LIQUI MOLY Chain Spray: www.autodoc.co.uk/liqui-moly/...
LIQUI MOLY Fast Cleaner: www.autodoc.co.uk/liqui-moly/...
WD-40 Grease Spray: www.autodoc.co.uk/wd-40/13563...
🔔 Subscribe to AUTODOC's channel and don't miss new videos on car parts changement ➜ kzfaq.info?s...
0:00 - FIAT PANDA (169) - brake shoes / : step-by-step replacement tutorial
1:03 Unscrew the brake drum fastening.
2:45 Remove the lower return spring of brake shoes.
4:28 Remove both shoes from the mounting bracket.
7:06 Install the brake shoes on the working brake cylinder on the bracket and on the brake-support plate bracket.
9:15 Install a brake drum.
Was this video helpful? Give it a thumbs-up and share it with your friends!
Have a look at other videos on our channel:
► FIAT car repair tutorial - • FIAT car repair tutori...
► FIAT PANDA (169) car repair tutorial - • FIAT PANDA (169) car r...
► How to change front wheel bearing on FIAT PANDA (169) - • How to change front wh...
► How to change front headlights on FIAT PANDA (169) - • How to change front he...
Mobile shop: m.autodoc.co.uk
📢 AUTODOC on social media:
Facebook: / autodoc.co.uk
Twitter: / autodoc_berlin
KZfaq: / autodocuk
Instagram: / autodoc_autoparts
TikTok: / autodoc.eu
#autodoc #autodoctutorial #autodoctips
Disclaimer:
This video is intended for informational purposes only and does not guarantee achievement of a specific result.
It is recommended that you entrust the installation to highly skilled technicians to ensure the best result.
This video is intended for informational purposes only and does not guarantee achievement of a specific result. It is recommended that you entrust the installation to highly skilled technicians to ensure the best result. This video only contains tips and recommendations that could be helpful when carrying out car repairs or replacing parts. AUTODOC is not liable for any harm, injury or property damage incurred while carrying out repairs or replacements that are a result of incorrect use or misinterpretation of the provided information. The user is personally liable for incorrect use of repair equipment, tools, or car parts, in particular when this use poses the risk of injury. AUTODOC strongly recommends taking appropriate safety precautions when carrying out any repair or replacement. Keep in mind that low-quality auto parts may not provide the appropriate level of road safety.
© 2020 AUTODOC GmbH All rights reserved

Пікірлер: 17

@wheater5 3 жыл бұрын

These videos are very well made. My only concern is the quite liberal use of copper spray near the friction surfaces, such as on the face of the hub before fitting the drum. To reduce the chance of contamination of the brake shoes I use a half inch brush to paint grease on, rather than spraying liquid grease from a can.

@autodocuk 3 жыл бұрын

Thanks for the comment. Thank you for sharing your experience, it will be very useful information for us and our viewers. AUTODOC

@nicktizzard495 3 жыл бұрын

Thank you very much. Very clear. No need for commentary!

@autodocuk 3 жыл бұрын

We are glad that this video was useful to you!

@dimi911 2 жыл бұрын

Best car repair videos!

@paternogiacomo 3 жыл бұрын

Beautiful!!

@MertMania 3 жыл бұрын

Very nice

@alexey9900 3 жыл бұрын

Good 👍👍👍

@petersmith4455 5 ай бұрын

hi, great video, my panda is a 2016 and has a different hand brake, cant see how to take floor up to loosen cables

@autodocuk 5 ай бұрын

You can find this information in the technical documentation for repairing your car.

@valentinivan841 6 ай бұрын

At the beginning of the video what have you checked there, the hello cap ?

@autodocuk 6 ай бұрын

Before starting work on the brake system, it is recommended to open the brake fluid reservoir cap, and after the procedures, check the level and close it back.

@Alex-hp2hy Ай бұрын

Lovely job until the sprayed on copper grease coating at the end!

@autodocuk Ай бұрын

Yes, copper grease can react chemically with an aluminum wheel. Therefore, if copper grease is used on aluminum surfaces, it is necessary to monitor operating conditions and regularly check the condition of parts to avoid undesirable consequences. More precisely, what lubricant is recommended to use should be found in the technical documentation for repairing your car.

@asscracbelfrage 3 жыл бұрын

Read this first if you’re about to change your break shoes. This looks easy in a fast forward video, in real life it’s not. You’ll save at least an hour when changing both sides if you remove the hub. Also, you’ll not damage the parts and hurt yourself. If you only changing the shoes as the headline says you don’t have to go inside the car, the shoes would also be worn if need replacement so they’ll not look the drum. But if they are, there is a release you can access through one of the holes for the nut. Since this is a dirty job you want to avoid getting inside the car. Also, you never ever spray fat, such as wd-40 on a break no matter what. You never ever mix breaks and fat if you know what you’re doing. In the video the drum is changed too, which should be mentioned since that’s the only reason to maybe get inside the car but often it’s still not needed since people rarely tensioning a wire on a self adjusting drum break. And also if only changing the shoes as the headline says you’ll need to grind the drum on its inner outer side to remove the little edge that’s left where the old shoes has not worn the drum down. My suggestion, look for another tutorial for this task if you want to succeed.

@autodocuk 3 жыл бұрын

Thanks for your attention to the details and advice. We will take everything into account when recording the following videos. AUTODOC

@MrAlexwoolf Жыл бұрын

The jobs a piece of piss with the hub still in place. But you are correct, reusing the original drum you will need the lip machining off.