Jason, do you still have these fenders? And do they make a wide version? Are they removable?

Love your attention to detail, and ability to show camera angles properly so we can actually see what you are doing. Thanks!

I'm a student from China and a big fans of the Jeep Wrangler. I think your videos are the best videos I've ever seen before!!!Looking forward to your next video.

This guy is a natural presenter...

Your videos have become the before bed entertainment for my daughter and I. We both love them. She's not three yet and loves jeeps. Can't wait for more videos.

i don't own a wrangler , but it''s an absolute enjoyment to watch the well plan and skilled Installation ! thanks !

You know you're subscribed to a great channel when you like the video before you watch it! Great video man, keep em coming!

I think the step up design is a great way to add clearance, very cool. And looks are even pretty good. Great video to boot.

I think I would paint those inner fenders. I know they wont rust or anything, I just dont like the look of them in silver. Those fenders are awesome.

badass flares but damn the inside aluminum shielding looks tacky as all hell.

Man I am so looking forward to your lift kit install. I check your channel every day! This Jeep is very cool and can't wait to see the mods as they happen. Thanks for posting.

Your videos are so well put together! Good job man

A tip for easier drilling through sheet metal is to use a Unibit instead of a standard twist drill bit. It won't catch and cause headaches and drills a much nicer and rounder hole.

They look great but I can't help but notice that the inner fender liners look piece milled together. Wonder if some black paint/powder coating wouldn't make that less noticeable. Of course none of that is your fault, just the design of the kit, and other than that they look great!

Fenders look AWESOME. However, the Fender Well Liner...not so much.. those gaps look like something is missing. Great videos as always.

CAN'T WAIT for the next vid.. keep it up!

I recognized the background in some of your videos. Your Jeep looks great! I drive a 2000 TJ on 35" KM2's and we wheel a lot of the same runs. Keep the videos coming.

This jeep is looking pretty awsome. Great video, can't wait for the rear and how it will look.

Dude I freaking love your videos!!!! Your videography is very good and your Jeep is even better!

You make it look so easy now I want a jeep. Good vid man!!

Your Jeep is really coming together nicely!

Jason, great job on the videos, I am enjoying watching you beef up your jku. mine will be there one day too. keep up the good work. Jeep wave from Florida.

Well done. Inner fenders would look nice If powder coated gloss black.

"and that is a GREAT idea, but I'm not going to do it." Haha sweet videos. I hope I get to put money into my JK someday.

I am personally not a huge fan of the aluminum panel. Maybe it would have been much better in a darker color.

You're next project should be putting on a LED Bar light, it will look more amazing.

MetalCloak Fenders are awesome, they look so good on wranglers

I'm loving this series, keep up the good work!!

I kind of like the look of this. Just can't bring myself to drill new holes and cut on my Jeep. Wasn't cheap!!

Following this is kinda fun. I love those fenders! Kinda regret going with the XRC armor after seeing yours. Very nice!

AWESOME! One of your best videos.

I always thought the stock Jeep fenders being plastic pop-off parts were pretty smart for offroading. 1) They won't transfer much force to the body before the plastic gives. 2) they are plastic so who cares if you scratch them up? 3) They are pretty cheap to replace if you do screw one up. These metal fenders will probably be stronger than the body they are bolted to, so the first time you hit a tree with them, they will transfer all that energy right into your body giving you some major body damage, where a plastic fender would have just broken, cracked or ripped off, either way without damaging your vehicle proper. Those metal ones look fantastic, but I would never replace my plastic fenders for metal...just my mantra I guess.

Jeep looks awesome! Great video can't wait for the next one!

I'm always finding myself always watching your vids I think your jeep looks pretty sick iv got the same jeep rubicon.

Great video! I'm looking forward to your next.

Love the fenders and love the videos. Keep em coming!

that is some tuff fenders and you made the install look easy. good job brining us this video. I have to ask again you said something about large marge I have not forgotten that project so huh still waiting.

good taste picking those fender flares ! how much you pay for the complete set?

Does your state not have a fender law? Those 'fenders' don't seem to cover much. How much tire splatter do you have?

I was able to install the passenger side inner without doing any cutting. The harness can just be routed between the aluminum piece and the firewall.

Would look nicer with those inner fender splash shields painted black. Very beautiful Rubicon though. You did a nice job on it & it'll turn a lot of heads.

im still not understanding about not getting a lift. metalcloak has a nice lift for about $2200 for that jeep. those fenders front and rear are about $1500 and you wouldn't need them yet if the jeep was lifted. i understand the excitement of getting the 37's but they could've sat in the shop till the lift came in. still your videos are great and i enjoy watching them. can't wait to see the thing in the air already.

Builds coming out awesome! -Z

Great install those fenders look awesome!

actually doesn’t look bad without a fender

Fantastic video. Keep the goodness coming!

I just realized you still have stock suspension. Give me more confidence to not need a lift. The bigger tires seem to give you enough. How does it drive on the highway?

i love this video because of your lovely Dog!

Any reason why you went Overline vs Overland aluminum? It's the interior brackets that truly motivates me. Been looking for the poison spyder aluminum, due to strength, but are discontinued. I can't be adding anymore weight with steel. Also, just sharing. I was somehow unsubscribed to your channel... and I know I've been subscribed. As always, thanks so much!!

you have to paint you inner fenders in black so they dont shows so mutch,, now you have a mirror :)

Metalcloak makes awesome products!

now the only missing upgrade is a RIPP supercharger

Jeep's looking great!!

Awesome vid!!! Throw the frisbee!

Now just waiting for youtube to process the video!

That amber lamp/reflector combo you took off from the original might be needed depending which state your from

Man you got paint those things black, like right away !

I'm really curious as to why you didn't remove the wheels and get them out of your way, particularly when you put in the fender lining panels.

Were these the standard width over line fenders, or the wide? Love the install video! Thank you!

you make the best videos. keep up the awesome work!!!

Glade to hear old large Marga is getting some love too. Really curious as to how the blown 302 runs with EFI. Also how all the suspension works A lot was done to the suspension it basically has completely new geometry Especially at the rear !?!?!...

Did you ever do the rear fenders? This video was great!

your jeep keeps getting better and better. are you planning on any videos of large marge anytime soon?

Praxair are the goggles, In case anyone like me was wondering!

Fantastic video!!

37s on stock? Madlad.

Another quality video!!

I was browsing around for some tube flares. This vid?... SOLD! You have a pretty awesome rig. :) A lil' bit out of topic, where did you get those glasses? They look great. Thank you very much!

Looks great, don't even need a lift now

Great video to explain the install

You might think about moving your mic to a place where it doesn't rub against fabric as much, the scratchiness is pretty bad for headphone users.

Took long enough 😂😂 I was waiting forever

Tell my GF to re calibrate her snapper often! :D Nice front fenders tho I really like the flat fenders with the small LED side markers. Also not a big fan of companies that place their emblem dominantly on product or all parts are not same color (that rear fender piece should be black!). We pay them for parts, not free advertising....heh.

wow looks awesome I've been thinking getting a JK since i have an XJ already, as always good videos, Keep it up ;)

You make some great videos....

notification master race

They look great

Jason I love these videos, the only thing is you don't include how much is the cost of the investment! can you do that?

nice choice for the fender upgrade. But have you done a gear ratio upgrade on your rig yet ? Your mpg got to suck if you haven't.

The front view is SEXY! Now I need a pair for my TJ! 👍

Their website lists them as either raw metal or black powder coat. I can't find a picture of them in raw metal. I assume you got black powder coated. How do you like them so far?

You are pretty handy,and job well done.

Very happy to have found your channel, I've really enjoyed your videos. My question here, are these the Standard, Narrow, or Wide flares?

Great video. keep up the good work

I noticed they offer an aluminum fender set. does anyone know if these are durable or if it is work the weight difference to get them? very nice vid thank you for sharing.

Is this the Overline standard size. I see it comes in narrow, regular and wide. Front and rears?

love all these vids, but WHY WOULD YOU NOT PAINT THE LINER?!? madness

looks great!

awesome style but i think the last panel just needed to be alingned with the washers

Great video but, I'm just wondering what did you do with the side marker light that was on the stock fender?

Where can I get those cool goggles?

Jason, Do you have any rust issues, and if so, how do you deal with it. I installed the MC Overline Fenders (BPC) on the front and the back with in the last few months, and they are already rusting. Thanks.

Serious question. Why have 95 people disliked this video! That's almost four percent. Oh well. What a great video! Thank you, Jason!

Nice vid👍 I am a Wrangler wannabe, it looks awesome. The eye protection you use, what are they?

Good Job, Very interesting and funny video!

Great Job!

Awsome quality and looks but not legal in most states and Canada from what I know... No turn signals

Subscribed!....great DIY vids. Learning a bunch from you...bought a used JK last year...and slowly building it out. What's your mileage with the 37's?

They look sick! Definitely agree with the others and would paint the inner liners black. Also where did you get those safety goggles? And do they fog up?

Where did you get the refrigerator from? This was a pretty cool video. I have watched several video's of you and your Jeep.