Hey Jason! I know I'm a year late to the party, but I'm having a great time watching you build up your Jeep. It's especially refreshing to watch automotive videos with no profanity!

You do such an excellent job running through the installs. Excited to see the next move!

Love the low CG look of this thing. The flares look just right. The current configuration looks pretty good too. I just ordered the metalcloak front bumper based on your other video, I really like their design philosophy. Form follows function.

I really enjoy the quality of your videos and your attention to detail when it comes modding your Jeep. keep it up!

i just want to say that I love your videos! keep it up!

You make the best instructional videos I've found on youtube and the quality of filming is great which helps make them that much better.

The Jeep is looking awesome!! However, the mud is going to LOVE this Jeep!! That space between the rear fender and body of the Jeep with the spacers is a total magnet for mud!! Eeeeesh!!

Looks amazing, great job! Im looking forward to the rear bumper and tire carrier install 👍🏼

Your video editing skills are on point! Great handy work too...really like your channel!

Great Video! Really enjoying the jeep build videos! Love the look of the 37s and no lift!

it looks amazing. all your ideas for further upgrades seem great.

Nice ride! I just bought a 16 wrangler sport. Can't wait to start modifying it. Picking up some wheels and tires soon!

Those fenders look great. I would love to see a rear bumper/tire carrier go on next! You have a very natural and relaxed presence in your videos; keep up the great work!

I know your Jeep looks great now, but so many were saying lift it a while ago and rightfully so. But the one Jeep here on YT that desperately needs a lift is Kyle SVT. That TJ is so cool sitting on 35's with Metal Cloak fenders like yours. His 35's are shoehorned in under that stock suspension / wheel wells. I cringe each time I see that TJ. Enough of that, I just wanted to say, I am not a fan of JKU's and would never even consider it despite the insistence from my wife to get one with our two sons. But your JKU is very cool and extremely well done. Keep up the great work!

Great videos, really high quality stuff here. I think another wheelin' video would be fun! Thanks for keeping us entertained.

thanks for these videos. im planning a rubicon purchase in august and its your doing alot of things i was planning.

Love watching the progression of your Jeep! Keep up the great videos

Your JK is looking really good. You've given me some ideas for modifying my CJ. Instead of doing a full restoration, I think I'll add armor.

Great video!! Can you show us how to repair a botched drill hole? Patch/fill, sand, and paint. I'm still catching up on your videos on the other projects, so maybe I'll find my answer there. But basically I installed a small mod on the inside of my tailgate several years ago. Had no idea what I was doing and messed up the drilling. I painted the holes to protect from rust, but I'd really like to repair it without taking it in. They're very narrow holes so I imagine it'll be simple. I'd really like to see you do this because, so far, your instructionals have been amazing!

I too really enjoy your videos! As an owner of a 2012 JK with 4.56R&P, 35s and a 2.5" lift ... I'm furious!! With little modification I could be running 35's without a lift! So many more things to worry about with the steering and suspension geometry.. I would lift your beaut as little as possible if you can. Looks absolutely awesome!

Very nice upgrade. Great looking product and install

I'm diggin' the JK w/out a lift.

awesome vids man. making everything look easy, def giving me confidence on my jeep build. keep up the good work. def would like to see maybe the tire carrier install next!

LED Light bar install would be amazing.

Looks tough, just needs those front inner panels painted black to match the jeep.

That's the cleanest rubicon I've ever seen!

Love your videos and the detail you go into making them thanks for it and the next thing should be the lift to make it stand out even more and it will look bad ass as well keep it up Jason

Awesome videos man, look forward to more!

Love your videos man gets me jonesen to get a jeep, Benn wanting for about 6 yrs to hit the north state

Great install vid! Hope to see you go with the Metalcloak long arm kit!!

Next step - 3.5" - 4.5" Rubicon Express Extreme-Duty Long Arm system

Jeep looks bloody great!

I love your videos. You do a great job!

Looking beautiful man! Love the production quality as well. Hoping my Wrangler will look like yours one day. As for the next video a rear bumper would be good or possibly the terraflex tire carrier. Maybe even a fastback top, they make the 4 doors look so much better.

Jeep looks badass . Great job

Your channel is awesome (maybe because we have the exact same Jeep 😉) but you’re really giving me some great ideas, keep up the great work. Can’t wait to see it when you lifted it

Wow man you videos are so relaxing and also talks about nuce stuffs so keep make videos about your jeep!!

Love to see some gun scabbards that are removable mounted outside. with a matching trailer that has a gin pole for loading game and carrying stuff.

I liked the video within a second. Already know the content will be superior!

I have to say at the beginning I was like "what is he doing drilling all those holes... he'll regret it!! then I saw it half way done and was like... "WOW That looks great!!" and adds a lot of strength too!

I really liked your install video. I would of added de-burring your drilled holes with a file before using the touch up paint. I love LCOG Jeeps!

Looking real good. Love those flares!

Great to see these vids. Nice work with the jeep, film, and editing. Not common to see a person that's good with tools and computers/cameras hahah. Waiting for the next vid already and hope to see a small lift and maybe more lights!? Wheel lights and maybe a light bar idk it's your jeep!

I don't even own a JK (LJ here) and I am loving these vids. Oh and I hope you never get a lift. The LCG is the way to go.

Great job Jason. Your Jeep looks Bad Ass with those fender flares! Now I want a Jeep! lol. I'm looking forward to your next off road video because the first one you did was so nice. Also, I watched Dirt Everyday's latest KZfaq video yesterday, The Range Rover/Ranger combo, and I saw a couple shots of you. Very Cool! ttyl bro. -Drew

The jeep looks so mean with that front bumper and fenders! I think the rear bumper would be a good next option to kind of complete the look. Awesome videos man keep'em coming!

Found you just "searching" and I've been watching the Videos for a while. Would like to congratulate you on this build. Its diferent when we do it ourselfs at home!! Great tire choice and winch. Dont really like the fenders and the armor but that is yours to choose. Also would recomend using a diferent front bumper. A "shorter" one mainly because of the edges and the aesthetic. Poison Spider maybe... I've got ARB front and rear but with that kind of fender its just not a pretty choice. Think about the Roll-bar strenghtning. Keep up the great work!!! PS. Also get a ARB Fridge Freezer when you can. Comes in handy!! heheh

Man that looks great! Rear bumper for sure!!!

Love your jeep it's so awesome

Those oversized tires on the rubicon rims actually look pretty awesome

I hope you've been busy, looking forwards to the next episode!!

Crawler Conceptz carries a great series of bumpers plus tire carriers. Would make for a good next step. On board air and some lights wouldn't be a bad option as well.

Another great video, brother!

Mean looking rig. Excellent.

Nice! Super easy install!

Love your videos! you make it very interesting wich is pretty rare =)

Loving this series! When will the next video be out?

looks awesome, great videos.

Your jeep looks sweet, man!

nice jeep looks sick... you make great vids surprised you don't have 100,000 + subs!!!

Really enjoying seeing the evolution. Given the path you are on, I would like to see the next step be Metalcloak 6paks and extended brake lines (and bumpstops if needed) to get some droop. I think it would be interesting to see the performance of a long travel shock with the massive tires and the LCOG thing you have going now without the lift. I imagine the limiting factor then will be the stock control arm bushings, which can be fixed with new arms later on.

id recommend the old man emu 4" lift for your setup, easy kit to install and great performance

"Put this tape on the body so we don't scratch it" ... and then drill a bunch of holes in it. :) - Like the videos. Keep up the good work!

Great channel and install videos. The AEV rear bumper with tire carrier would be my pick for the back end. Then start saving for a RIPP supercharger 😬

I like the NO fender flare look the best LOL

Your videos are awesome!! keep it up. If you are thinking of a 3 inch lift or more, take a look at PowerStep Running Boards, they can act as rocker guard and make it easy getting into the jeep.

Great video

Amazing video man

All you've done so far, video and mod wise is fxcking awesome! Keep it up! And please, please, release your off road video with these flares on asap :O! We're waiting :)

No need for a lift now!! Looking awesome!! Maybe some more aggressive offset steelies to widen your stance a bit!

Verry Nice rig sir....well dun....

Another great video!!

Beautiful Video!

the jeep looks real tuff you are doing a great job fixing it up I think you should add what you think is right or what you like cause it looks like you know what looks good.also I have to ask about large marge hope to see you working on it soon. love that projecct!

They look great! Wish i could afford metal cloak fenders for my jeep next i would like to see integrated rear bumper with tire carrier.

LED light bar and spot lights then paint inner fender liner when you do the lift.

amazing jeep...

The armor plate looks really awesome with the bolts around the edge it like that. I'd want door plates with the same look, and maybe even plates around the front fenders. It's probably not worth it just for the looks though. Realistically, I think performance upgrades would be interesting to see, or if that's not in the plan, the lift.

well that answered my question...how does metalcloaks look with full width bumpers! good video, thanks for making it!

Great video to augment the Metalcloak instructions. One strong suggestion: you will need to install many threaded inserts, possibly many more depending on your vehicle configuration. The supplied “tool” is pretty sketchy and prone to causing errors that are difficult to fix. If you use manual strength to install as shown, you will wind up pretty sore. If you use power tools, the inserts will strip. Save all that hassle and use a proper insert tool like this one from Amazon - Astro Pneumatic Tool 1442 13" Hand Rivet Nut Setter Kit, that’s about $50. You’ll also need a properly sized mandrel for the 3/8” threaded inserts, also available from Amazon for $15. There are others that are cheaper, but regardless of which one you use, the inserts will be properly seated without stripping. The tool will pay for itself. Also, a step drill is far superior to standard drill bits for drilling through the sheet metal without binding or tearing and leaves a much smoother finished hole without a burr. It’s much faster too. After center punching, I drilled a 1/8” pilot with a standard bit and then went to the step drill for the 3/8 holes and 1/2” for the threaded inserts. I then chased the 3/8” holes with a standard 3/8” bit for bolt clearance and for the insert holes, finished them with the 17/32” bit that Metalcloak offers. After trying the bit sequence for gradual size increase with standard bits and still having the bit bind and tear the sheet metal, I tried the step drill combination described and didn’t look back. The install of all 4 fenders and rails required more than 50 holes to be drilled and the step drill method was the fast and left a perfect hole that didn’t require additional deburring.

Nice dirt every day shirt bro, I just watched that episode yesterday lol 👍🏼

Good job!

nice upgrades...for cosmetic look, also add tail lamp guards and fuel filler door...little things, easier to install, but it helps the look too..:-)

Pretty cool! I really like this mod! Just wondering, are there any fenders that might be wider so as to cover the whole width of the tires? Kinda curious as to how that would look...

Love the videos and yr jeep! How hard is it to keep up the black paint?

Such a clean simple look! Nice work! More Off-Road Vids!! :-)

are your rear fenders standard or wide? Love your quality videos

I think I heard u say u r still on stock suspension get a 3-4 inch rancho kit with the 5000x or 9000xl shocks!! I just did the 2 inch kit in my back yard and couldn't be happier! Good luck can't wait for the next video

I vote spare tire carrier/rear bumper, I've preferred the look of no lift 37s anyways, but when the time comes for the lift just keep it as low as possible while still having clearance.

Lift kit, leveling kit, or a tire carrier for those 37's 👍🏽👍🏽👍🏽

wow so nice

spray bed liner in ur wheel wells to add more protection under the jeep

Great videos. Yes, at some point a slight lift is necessary to obtain the full use (range of motion) with using your 37" tires and future suspension that I know you will want to get. Keep it up and so you know, your Jeep will start talking to you in your sleep... buy more...., more...., more.... and honestly it will never stop. haha ;-)

Definitely rear bar and tyre carrier. Maybe some room on the back for jerry's and a high lift jack.

I bought a 2016 black Black Bear Wrangler. I wish I knew how to do awesome stuff like this lol.

I have been thinking of going with some metalcloak fenders . Just not sure if I want overline fenders or the overland ones. Tough choice .

Jeep looks awesome. I say rear bumper to match the rest.

general mayhem decal!! :D awesome!!!

So I've must have missed it in other episodes if you have mentioned it before but I assume you must work for motor trend? As you have dirt everyday shirt on and have the general mayhem sticker on your back window from Roadkill. Cool Jeep though, I went with the Krawler Konceptz metal fenders on mine, however I wish the new ones from JCR would have been out as they would have matched up better with my RSE power slider steps

Looking good! Curious to see what lift you're gonna throw on there.