An overview of the Autogyro Pre-Rotator systems and demonstration of the process of the parts If you enjoy, don't forget to Like and Subscribe Check out my Website: www.ronsgyros.com
Пікірлер: 20
@beanbagcommando2 жыл бұрын
Very detailed, thank you for going through each step with demonstrations
@michaelvadney5803 Жыл бұрын
Nice E-bike btw. Thanks for the video!
@rohanbaty31552 жыл бұрын
ahhh the old pulsating pnuematic clutch engagement trick. That explains the cooling holes in the clutch plate
@ADEAinc2 жыл бұрын
Great video - very informative
@RonsGyros2 жыл бұрын
Glad you enjoyed it!
@RonsGyros2 жыл бұрын
Iam in the process of uploading a 6 video series of getting your pilot certificate.
@claudiomacripena83210 ай бұрын
Excelent.. thanks
@Kebekwoodcraft737511 ай бұрын
What is the fastest pre rotation speed is safe for short takeoff 😊 thanks I enjoy your video 😊
@Gryronaut2 жыл бұрын
Thank you Ron. I was taught to always prerotate once lined up in the runway for safety purposes. I've seen people prerotate before entering the runway and would like to know what procedure if any do you use for prerotating at busy airfields. Thanks.
@RonsGyros2 жыл бұрын
I simply announced that I'll be stationery momentarily to spin up the rotors. Once you've taxied in position on the runway, you have the right of way for the runway.
@loughkb2 жыл бұрын
Question. I know people pre-rotate to around 200 RPM before starting their takeoff roll. Is it a reasonable idea that you could pre-rotate to a higher RPM if you need a shorter take off run?
@user-rh5jp2sh4s7 ай бұрын
Just out of curiosity a question. Wouldn't a small electric motor (high torque, low power) be a much simpler solution, with fewer parts?
@lorendjones Жыл бұрын
What is the source of the pneumatic pressure? Is there an air pump on the engine?
@scotmiller34602 жыл бұрын
Captain Ron what did you say after releasing the pre-rotator button? It sounded like count to three?
@RonsGyros2 жыл бұрын
When the cyclic is in the full forward position during pre rotation, when you release the pre rotation device, then the cyclic should be moved to the full aft position DURING the count of 1_2_3. As not to jerk it totally rearward at once.. Thanks for watching
@berniemccann89352 жыл бұрын
Wow !
@RonsGyros2 жыл бұрын
Thanks for watching
@south_paw2 жыл бұрын
My son is thinking about building a gyro, to keep that interest I’d like for him to ride in one. Do you do rides? If so, what would that cost? If you don’t, do you know someone in the four states area (Texas, Arkansas, Louisiana, & Oklahoma) that does?