AWD Swap continues, no turning back.

Рет қаралды 23,063

4 жыл бұрын

Part 3 of a mini series as we do an AWD swap/conversion on this existing big turbo MK5 GTI. In this episode we cut out the rear pan and come up with a plan of attack for making the Haldex/AWD fit up in place.
Current setup is a 2.0T TSI with a hyrbid APR Stage 3+ turbo kit now utilizing a GTX3076 and Tial 44mm external wastegate.
APR Stage 3+
GTX3076
Tial 44mm Wastegate
2.0T Fluidampr
IE Connecting rods
IE Intake Manifold
IE Catch Can
Widebody
Custom paint
ST Coilovers
Add us on Instagram
/ comotorsports
Finally by Loxbeats / loxbeats
Creative Commons - Attribution 3.0 Unported - CC BY 3.0
Free Download: bit.ly/FinallyLoxbeats
Music promoted by Audio Library • Finally - Loxbeats (No...

Пікірлер: 56

@BenjaminFranceMusic 3 жыл бұрын

I know that this is a bit older of a series, but I really appreciate you guys doing it. I have a mk6 Tdi Sportwagen, and my goal is to eventually awd swap it, so this is super helpful! ❤️❤️❤️👍👍👍

@COMotorsports 3 жыл бұрын

No problem. Good luck.

@NyksWyldMynd 4 жыл бұрын

Awesome work. I love watching videos like this and seeing the work being done. Great stuff!

@COMotorsports 4 жыл бұрын

Thanks

@chrisclow6885 4 жыл бұрын

Bead rolling looks on point! Great work Dave!

@COMotorsports 4 жыл бұрын

Thanks was going to do our logo in it, opted to just make it look clean factory like.

@chrisclow6885 4 жыл бұрын

@@COMotorsports any updates on the silly rabbit? I haven't seen it since it's last MVOC.

@COMotorsports 4 жыл бұрын

@@chrisclow6885 We'll have something on it this year for sure.

@ModVlog 10 ай бұрын

NICE NOTE ON THE REAR SUBFRAME BOLT LENGTH 🔥

@rodrigoalvarez8662 3 жыл бұрын

nice cuts and patches !!

@johnjerrett9684 4 жыл бұрын

Awesome job 👍 you guys are A+

@COMotorsports 4 жыл бұрын

Appreciate it.

@bradleychurchill2168 4 жыл бұрын

Well done, enjoy the content!

@COMotorsports 4 жыл бұрын

Thanks. more to come.

@TokyoCollins 4 жыл бұрын

love the progress not only on the car but on the videos dude! keep slaying it dudes! cool littly cinematic and outtakes as per usual!

@COMotorsports 4 жыл бұрын

Thanks man, no shortage of outakes that's for sure. lol

@JakeRawSon 4 жыл бұрын

OMG so much good info. Thank you

@COMotorsports 4 жыл бұрын

Appreciate the feedback.

@grahamhall1970 4 жыл бұрын

Fab work looks great! Didn't know you were in Canada. Keep up the great work, from Ottawa!!!

@COMotorsports 4 жыл бұрын

Thanks, much appreciated

@TheChile01 4 жыл бұрын

Looks good!

@COMotorsports 4 жыл бұрын

Thanks, lots more to do yet.

@blue32nu 2 жыл бұрын

Great work! The new panel looks great. You should keep a measurement and offer it as a one off for someone attempting to do the swap and go that route.

@COMotorsports 2 жыл бұрын

We do, you'll find another video on our channel. "AWD Swap in a weekend" where I do one in my daily. Same pan. kzfaq.info/get/bejne/ncxyaLNy1pfGYps.html

@timothymaddox1957 3 жыл бұрын

This buds for you sir everyday thank you for your help, awesome job my son and I wanted to try this on his 2012 Jetta 🤔

@COMotorsports 3 жыл бұрын

Thanks, best of luck.

@doublejmotorwerks 4 жыл бұрын

Looks great! I like the design that you did on the panel. I love the out takes. Check out the DJM Project A59 that I did.

@COMotorsports 4 жыл бұрын

Thanks man, much appreciated. Will do.

@half_r_mk5 4 жыл бұрын

Oh man can't wait for the next episode 👍👍 Awesome work! I wonder how much would this build cost?

@COMotorsports 4 жыл бұрын

Depends on donor car, and what others mods are required at the time. The swap itself isn't bad... it's getting the right hardware without getting gouged.

@jared4670 10 ай бұрын

This is the mk5 as well. Perhaps you haven't done a mk4 swap? Or are the details hidden inside one of your mk5 videos?

@Paul_VanGo 4 жыл бұрын

I would've cut all those stereo wires a long time ago. Mark 'm and snip. It's a bodge install anyway. Or let the owner come over and make room himself. Working around it is ridiculous.

@Jay_Silvia 11 ай бұрын

I would do that to a golf mk7 GTI 2 door

@robertmoorhouse2081 8 ай бұрын

Hey, thank for the info, most of my conversion is complete, I'm trying to setup the fuel tank transfer pump on the sending unit. How did you get that to work?

@COMotorsports 8 ай бұрын

All depends on the car the swap came from. Wiring schematics are your friend.

@travisharvill7395 3 жыл бұрын

I’m looking to do an AWD conversion for my 2003 Jetta tdi would this process be the same or different any tips ?

@COMotorsports 3 жыл бұрын

We've done them on MK4's, not even close. The MK4 is a lot more work.

@LlMA_ 2 жыл бұрын

What year A3 is that awd subframe is that? Would it fit in a 2013 jetta?

@COMotorsports 2 жыл бұрын

As long as it's not MQB platform all the A3s in North America are basically the same when it comes to the AWD versions.

@jettamaster3297 3 жыл бұрын

So why do you grind the spot welds instead of drilling them out ?

@COMotorsports 3 жыл бұрын

It comes down to what piece of metal you need to save. Sometimes spot weld.bit is the only answer. But the grinder is easier, quicker, and cheaper, so it's used when possible.

@fredjones5327 10 ай бұрын

Awesome video but how did you guys wire the AWD system???

@COMotorsports 10 ай бұрын

Looked at the wiring diagram for the haldex and wired it in.

@fredjones5327 10 ай бұрын

@@COMotorsports Erwin???

@greg2189 4 жыл бұрын

What year A3 rear diff assembly did you use?

@COMotorsports 4 жыл бұрын

Didn't use A3 for this one.

@greg2189 4 жыл бұрын

CO Motorsports but you could? What year vw or audi rear diff assembly can I get for my gti Mk5?

@COMotorsports 4 жыл бұрын

@@greg2189 We used a MK5 R32 complete setup for this vehicle.

@luispadilla1675 4 жыл бұрын

awesome job, what is the name of the tool at 4:20 ?

@COMotorsports 4 жыл бұрын

www.amazon.ca/Ponceuse-bande-33575-457-bo%C3%AEte/dp/B06XPH5YV5/ref=sr_1_35?crid=162FLNY6FX5U4&keywords=belt+grinder&qid=1588953248&sprefix=belt+gr%2Caps%2C378&sr=8-35