Awesome Blueprint Designs That You Can't Miss in Satisfactory Update 7

Рет қаралды 18,324

Жыл бұрын

This video is a step-by-step guide to 2 of my favorite blueprint designs so far in Satisfactory Update 7.
This tutorial will give you a clean manufacturer build that can be chained end to end for any length of manifold. You will also get a walkthrough for a self-contained assembler blueprint that is quite aesthetically pleasing
You will also get some good Satisfactory tips for your builds and how to use blueprints in you builds. You can also pick up some great tips on how to hide your power and run belts through frames. I also built a cool glass shell around the blueprint designer that has been added to the experimental branch in Update 7.
If you want some max output builds, check my channel for my last video that will show you how to pump out huge production from your blueprint designs
If you want access to my save games and my blueprints, check out my patreon at the link below.
Support me on Patreon:
/ drlootcrate
Come hang out on Twitch:
/ drlootcrate
Follow me on Twitter:
/ drlootcrate

Пікірлер: 33

@Verloren167 Жыл бұрын

5:15 Use a double outlet instead, and run the long wire inside the frame pillar

@DrLootCrate Жыл бұрын

Excellent idea, but you can’t actually grab anything inside a small frame pillar. It is treated as if it is solid. You can’t access the lower half of the double outlet

@marcovanderspek9476 Жыл бұрын

Want tight liftplacement? Then try placing lift first and attaching splitter straight to it. Not gonna use the assembler house cuz' that's just WAY to much space for placing just 1 assembler, when I can fit 3 on a single blueprint. But I do really love the manufacturer setup, it's a very interesting take on a 4 input manifold. Not gonna copy it 1 on 1 but I'll definitely take some inspiration from it

@DrLootCrate Жыл бұрын

You can fit 9 assemblers on one blueprint if you go up! This is wildly space inefficient, but I am going to use my little house to make some neighborhoods in my next big factory. Good luck making your own blueprints

@marcovanderspek9476 Жыл бұрын

@@DrLootCrate thanx! I know they can stack vertically, but forcing myself to always build assemblers in groups of 9 is gonna get frustrating really fast with ratios. I think I rather keep a low-profile 3 assembler blue print and simply print it three times on top eachother if I want a block of 9 ;) Am curious to see what your sub-urban town will end up looking like

@DrLootCrate Жыл бұрын

@@marcovanderspek9476 I will probably do the same thing re: "basic" blueprints. I am curious to see what it will look like as well. I hope good!

@Alx56 Жыл бұрын

The construction materials are FREEEE!!! fly away while you can

@bndoug6672 Жыл бұрын

DrLootCrate, very inspirational ideas. Thank you for sharing them with us.. Keep up the great work!

@DrLootCrate Жыл бұрын

Thanks! I appreciate the early feedback on a lot of my videos from you

@aj_the_infamous1013 Жыл бұрын

im definitely going to use the assembler design (not making the house but that is a great modular design

@DrLootCrate Жыл бұрын

Awesome. I agree that it is a nice compact design inside the uselessly large shell 😉

@27hund1 Жыл бұрын

I really like the first one. I can see me using that for sure. Thanks.

@DrLootCrate Жыл бұрын

Awesome! Thanks Garrick

@DotLevine Жыл бұрын

Loving your videos. Your voice would be easier to hear if you compressed it. If that makes too much noise, you can use a gate before the compressor. and if that's still not loud enough, you can use a limiter at the end of the audio chain. Just keep tweaking until it feels right for you, then you can save your audio chain as a preset in your editor!

@DrLootCrate Жыл бұрын

It funny that you say that, because I updated my software which disabled my VSTs without me knowing, a noise gate, subtracting out the noise from my pc fans, and another noise suppressor. So I recorded most of this video without them being on. I think that I had my game sound a little higher in the mix as well, which has the hover pack drone in the background. so I didn't like my audio as much in this one either! Good tips for sure and I am glad that you are enjoying the vids

@nathanalberg Жыл бұрын

ALWAYS USE MARK 1 BELTS IN BLUEPRINTS!!!! (and mark1 powerpoles).. you can then use them in new games without having to reach MK5 belt tier... you can always quickly upgrade them after you place the blueprint. My last restart... i realized I couldnt use any of my blueprints because I needed to unlock aluminum for the mk5 belts. :)

@DrLootCrate Жыл бұрын

It might better to say use Mk3 belts in blueprints. You don’t get the blueprint designer until tier 4, so you should mk3 belts by then. I haven’t started over since I started making blueprints, but I wouldn’t use them much until I got to mk5 belts. But point taken, especially for blueprints with earlier machines -assemblers and earlier

@nathanalberg Жыл бұрын

@@DrLootCrate good point

@cdm96247 Жыл бұрын

Excellent designs I like the Assembler house Idea for making a industrial zone layout. Might revisit your Manufacturer stacker from the first vid. Also for the fiddley frame beams might try dropping a vertical column rather than the conveyor wall it tends to work better for lining it up. It will be outside the designer but you are going to remove anyway.

@DrLootCrate Жыл бұрын

Thanks! Vertical columns do work better for lining them up, but you can’t put them down right off the edge of the blueprint machine. It has to sit back off the machine and then it is an awkward difference in height. It is a good idea…I tried!

@cdm96247 Жыл бұрын

@@DrLootCrate Wonder if the road barrier would work better then. That you can have hanging out in space and it would make adjusting easier since it allows sliding better than the walls.

@DrLootCrate Жыл бұрын

@@cdm96247 worth a shot. I will give it a try

@vincewilson1 Жыл бұрын

That is a major bug! I know, its Ficmas time so Snutt turned into the grinch and stole all your parts!

@DrLootCrate Жыл бұрын

Haha! Luckily they have fixed it in a patch since then, but that was definitely pretty weird!

@LalleMangaming Жыл бұрын

great ideas \o/ not so awesome bug :D

@DrLootCrate Жыл бұрын

Seriously, what a weird bug. But that is what you sign up with in experimental I guess. I had actually never gone with the experimental branch for this reason, but I couldn’t wait for the blueprints

@LalleMangaming Жыл бұрын

@@DrLootCrate same here budd, also, watch out with placing stuff inside water, i could not get mij foundations back once placed in the water 😥

@pepperbox-ic3oo Жыл бұрын

a bit disappointed that at the end I still not seeing how exactly u hookup the manufacturer belts as they are inside frames, but good design ideas!

@DrLootCrate Жыл бұрын

Sorry, that is my own laziness. The bug was causing it to use double materials for every blueprint and I just didn't have enough. Glad you liked the ideas and I will probably be putting them in action in my upcoming turbo motor factory

@TonyPort Жыл бұрын

Hi! What a great game! I love it. I play Satisfactory in Boosteroid. Do you hear about them? This is a cloud gaming service. Hey, maybe you can make a video about them?😀😀

@DrLootCrate Жыл бұрын

Pay me enough and I might!