Awesome Restoration of Rusted Grinder

Рет қаралды 857,637

Жыл бұрын

Welcome to my restoration channel! If you like restoration videos or restoration asmr videos you found the right spot! In this video I restore a Craftsman(Sears, Roebuck and CO. USA) Bench grinder that I picked at an auction for around $60 USD. This is a 1/2 H.P. Ball Bearing Capacitor Ginder.
Thanks for watching, I appreciate the view!
THE RESTORATION PROCESS
I tore the bench grinder apart and sandblasted the painted parts. We fixed the wiring and had the capacitor bench tested at our local electric motor shop. I replaced the bearings. I used a tumbler to clean up a lot of the small hardware. I wanted a more stationary base for the bench grinder so we built a new one that fastens directly to the floor. Overall the restoration turned out great and I am happy to have this bench grinder in my restoration shop. It should come in handy!
If you like what I do here, be sure to subscribe, like and leave a comment. Thanks so much for the support. I appreciate your view.
Follow me on Facebook
profile.php?...
Follow me on Instagram
/ rebuiltandrestored
Check out this Snap-On Ratchet Restoration…Mirror Finish: • Mirror Finish. Rusty S...
Check out this 1940s Dump Truck Restoration: • Turning a $40 Truck in...
Check out this old Pipe Vise Restoration: • Restoration of a Ruste...
Check out this Rusted, Stuck Vise Restoration: • Very Rusted & Stuck Vi...
Check out this Vintage Toy Restoration: • Awesome RESTORATION | ...
Check out this Old Tonka Truck Restoration: • 1970s Tonka Concrete M...
Have a blessed day!
Kev
Products used in video:
Craftsman Allen Wench Set. amzn.to/3ldpfCB
Snap Ring Pliers. amzn.to/3lgjNyX
Iwin Channel Locks. amzn.to/3Lpt3vq
Camera and filming gear:
Main Camera. amzn.to/428GF3Y
Video Camera. amzn.to/3JD7J41
Main len. samzn.to/3JDIL4F
50mm Lensamzn.to/3mUZZBt
Disclaimer. All links above are affiliate links. I make a small commission if links are used.------------------------------------------------------------------------------
#restoration
#restore
#tool restoration
#vintage restoration

Пікірлер: 1 000

@MrFireman164 8 ай бұрын

This was 32 minutes of free therapy for me, thank you 🙏🏻

@RebuiltRestored 8 ай бұрын

Awesome! Glad you enjoyed! Thank you for watching!

@Titanykus 9 ай бұрын

This is my new favorite restoration channel, forget Netflix of Amazon, a beer chips and this video, no talk all show and tell, the way I like it. Cant wait for a vintage bicycle restore, like a Raleigh or something or a vintage table fan.

@RebuiltRestored 9 ай бұрын

Thanks much! Glad you enjoy it! I do have an old fan that needs redone at some point. Thanks for the comment and have a great day!

@joeyb3102 3 ай бұрын

I've probably watched a hundred different restorerers on YT and you're the first one I've seen lay down a good weld. Thank you

@RebuiltRestored 2 ай бұрын

Thanks. My brother is the welder! I’ll tell him!

@harmlesscreationsofthegree1248 9 ай бұрын

When things are built to a high quality standard, they are worth restoring and rebuilding. You will never see a better made grinder than this again, and now it’s restored it will last another lifetime. Outstanding!

@RebuiltRestored 9 ай бұрын

Thank you very much! I appreciate that

@mexicanpower544 9 ай бұрын

This press has worked like a charm for my projects kzfaq.infoUgkxajoEbapTfqWaadnqb04h6U576yxXp-FE . I didn't even secure it to my table top, mainly due to the fact that I was using a 15 lbs drill vise. It's not flimsy at all as to what others have claimed it to be. Make sure the locking nuts and levers are secured and there won't be any issues with light pressure and patience. I was able to drill through aluminum, plastic, and steel (steel took a while) with no problems at all. Yeah it took a little longer than a regular drill press, but I don't have the space OR the money for one.The instruction manual was worthless, but luckily assembling the press was intuitive. However, the manual would be good for ordering replacement parts if needed. There is a nice breakdown of the parts that are included in the kit. Before ordering, make sure it is compatible with your unit, it is clearly stated what models the press is compatible with.This was an excellent purchase for $40!!

@RebuiltRestored 9 ай бұрын

It is very stable!!

@byOldHand Жыл бұрын

It always makes me happy to see an old or antique being saved. well done, very nice work.

@RebuiltRestored Жыл бұрын

Thanks much! I appreciate it. I plan to keep this one in my restoration shop! Merry Christmas!

@giovannidalcanto155 Жыл бұрын

@@RebuiltRestored /

@davidsage9966 Жыл бұрын

Really appreciate there being no music - this is a really cool restoration!

@RebuiltRestored Жыл бұрын

Thanks much! I appreciate it!

@Cobra-ky9bt 11 ай бұрын

I remember those old plugs from way back. Never thought I'd see one again. I've not thought about them in so many years. It brought back pleasant memories of my great-grandmother's house.

@RebuiltRestored 11 ай бұрын

Awesome! Glad to bring back some good memories! Thanks for watching!

@tkskagen Жыл бұрын

Watching items that were "Master Manufactured" being taken care of makes my heart "pitter-patter"!

@RebuiltRestored Жыл бұрын

Lol good deal! Thanks for watching!

@LynxStarAuto 9 ай бұрын

Watch out that might mean a pacemaker is in your future! 😂

@ultrapureblood1311 Жыл бұрын

Great job, good for another 50 years. As a boomer, it warms my heart watching a Craftsman tool restored to it's former glory.

@RebuiltRestored Жыл бұрын

Thanks much! Glad you enjoyed!

@wakcedout 8 ай бұрын

This looks like it’s from 70s maybe early 80s. Definitely looks like a model I remember seeing in the garage that my dad had. He use to brag craftsman for the lifetime warranty replacement. Guess we finally got the answer as to what lifetime they meant. Regardless of what decade this grinder was made in, it was made back when they made things to last. Even as a kid the 80s was a hell of a time to be alive.

@tomdale1313 Жыл бұрын

ARTISAN FOR SURE, tanks for sharing...

@RebuiltRestored Жыл бұрын

Thanks so much! Appreciate it!

@gqunder 8 ай бұрын

Another amazing Job !! waiting on the little truck , enjoyed it thank you

@RebuiltRestored 8 ай бұрын

Thank you very much! Glad you enjoyed!

@The_Bearded_B 7 ай бұрын

Very nice work

@RebuiltRestored 7 ай бұрын

Thank you!

@bixby9797 Жыл бұрын

New Craftsman Tools to rebuild an old Craftsman Grinder. Nice

@RebuiltRestored Жыл бұрын

👍 thanks!

@TheDriver454 Жыл бұрын

great job...i only have one little thing to add...unless you want to blast the paint on the wall behind it..some square tubing and some container to catch the debris from grinding would be a last finnishing touch :)

@RebuiltRestored Жыл бұрын

Thanks for the advice! I thought about adding some dust collection at some point and yes that would keep the wall Much cleaner! Thanks for the comment!

@charlesreynolds2798 Жыл бұрын

That torch in the cabinet awesome.

@RebuiltRestored Жыл бұрын

Letting it idle

@barnycanuck6234 Жыл бұрын

Possibly the best balanced grinder ever made. When new it would spin for 3 minutes after being shut off. Mine bought in 1972 are both still running fine.

@RebuiltRestored Жыл бұрын

Awesome! Thanks for the comment!

@garyjones2582 Жыл бұрын

I was hoping to see some flying tools.. So many tools, so little time... Very nice restoration.. color choices were perfect... Until next time, take care my friend...

@RebuiltRestored Жыл бұрын

Lol thanks much! Have a great day!

@cavisco Жыл бұрын

Love the old square body craftsman grinders. Yours was made by Packard Electric.

@RebuiltRestored Жыл бұрын

Ok thanks for the info! I appreciate it!

@franciscojaviercaotejero488 Жыл бұрын

Eres un fiera tio

@RebuiltRestored Жыл бұрын

Thanks you! 😂

@jfleser88 Жыл бұрын

I love how methodical you are in restoring things. Great work.

@RebuiltRestored Жыл бұрын

Thanks much!

@user-by4mc6wq3s 7 ай бұрын

Well done, good approach to business😊😊

@RebuiltRestored 7 ай бұрын

Thank you very much!

@IratePuffin 8 ай бұрын

That metallic rustoleum color was nice!

@RebuiltRestored 8 ай бұрын

Thank you. It’s kind of on the idea of the original

@charleslanier1992 Жыл бұрын

That is a nice grinder and stand. Love the old craftsman line of shop tools. All cast iron solid. I really hope you do more of this craftsman line of shop tools.

@RebuiltRestored Жыл бұрын

Thank you very much! The next video isn’t a craftsman but who knows in the future! 👍👍

@wileycoyotesr8623 Жыл бұрын

You did a fantastic job. Good the lamp shade wasn't damaged. The cord plug is top quality. Always important to have solid safe electrical connections. A Craftsman restored a Craftsman tool.

@RebuiltRestored Жыл бұрын

Thanks! And yes the lamp shade was in great shape! Thanks for watching and Happy New Year to you!

@GordiansKnotHere Жыл бұрын

Just like the title says "Awesome Restoration of Rusted Grinder". Great work man!

@RebuiltRestored Жыл бұрын

Thanks very much!

@petechampagne4893 8 ай бұрын

Great work as always. Love that you use restored tools to uh...restore tools. Ha ha

@RebuiltRestored 8 ай бұрын

Thanks you! 👍

@justinmcclanahan6036 10 ай бұрын

Nice restoration of the old grinder & glad you kept the original factory plate that they riveted on the front of it & the other grinder wheels that was on it is still good,you can keep them back for spares & that's nice that you put a wire wheel on the other side of the grinder

@RebuiltRestored 10 ай бұрын

Thanks much! And thanks so much for watching! Have a great day!

@justinmcclanahan6036 10 ай бұрын

@@RebuiltRestored You're welcome

@paulpaulos7386 10 ай бұрын

Awesome how you bring old back to life, love the recycling ben!

@caterpillart5662 Жыл бұрын

Good job bud you really got you stuff together i would have gave up on the electrical part. The part i liked the most was when you took a photo of the electrical stuff and you put “for my memory” i found out that that was the funniest part of this video😂

@RebuiltRestored Жыл бұрын

🤣Thank you very much! I appreciate it!

@williamvaughn2938 11 ай бұрын

Same here

@wjotto Жыл бұрын

Satisfaction, Nice Job!!!

@RebuiltRestored Жыл бұрын

Thank you very much!

@matthiasmartin1975 Жыл бұрын

I like the sign on the wall.

@RebuiltRestored Жыл бұрын

Thanks much! I appreciate it!

@lordieshepherd 9 ай бұрын

So good. What a masterpiece.

@RebuiltRestored 9 ай бұрын

Thank you very much and thanks for watching!

@TapeSan1 6 ай бұрын

Awesome job! Really enjoyed watching your work! ✌Greetings from Italy 😉

@RebuiltRestored 6 ай бұрын

Thank you very much! Greetings to you as well! Have a great week! 👍

@HereticalBuilder Жыл бұрын

Nicely done. One suggestion: replace the capacitor next time. Electrolytic capacitors dry out over time and need to be replaced. That old one could fail at any time.

@RebuiltRestored Жыл бұрын

Thanks for the advice!

@BITEBOC Жыл бұрын

Good job sir. She now has a new lease on life.

@RebuiltRestored Жыл бұрын

Thank you very much! Happy New Year!

@BITEBOC Жыл бұрын

@@RebuiltRestored Happy New Year to you too.

@jonascazares153 7 ай бұрын

Craftsman still my favorite tool brand. Grew up going to sears with my dad to buy tools regularly. Great job restoring that bench grinder. 👍🏼

@RebuiltRestored 7 ай бұрын

I remember going to Sears as well! 👍 thanks for watching! Have a great day!

@unkjason 6 ай бұрын

Yeah, Sears was my favorite store at the mall for most of my life.

@RebuiltRestored 6 ай бұрын

@@unkjasonsuch a good store. As a kid, I was all over that place.

@Occuria1 10 ай бұрын

Back when Craftsman Tools were good.

@RebuiltRestored 10 ай бұрын

True! They don’t make ‘em like the use too! Thanks for the comment!

@sethh8892 5 ай бұрын

Back when the logo had "MADE IN THE USA" on it😂

@windmillacres679 Жыл бұрын

Suggestion? I personally would have replaced the capacitor. I like to restore old tools and actually USE them. If that beauty gets put back to work, there's a good chance the capacitor will not last. Those old wet capacitors just go bad over time. A modern replacement would be fairly cheap. Just my opinion. That and $5 might get you a cup of coffee.

@RebuiltRestored Жыл бұрын

Thanks for your suggestion! I had this bench tested and it was good. I can replace it if I ever need to…. I do enjoy coffee ☕️ Thanks for watching! 👍👍

@banditman142536 9 ай бұрын

Yet another great video. You are spoiling us. Oh but the the red vixen of a trolly jack has stolen my soul. You are the chosen one. You are the Captain of restoration. May your tools get bigger and brighter. May you get many many sponsors

@RebuiltRestored 9 ай бұрын

Thank you very much! Glad you are enjoying! However, I am still learning! :) have a great day! 👍

@adriananderson486 7 ай бұрын

The already lit torch in your chem cabinet was a JUMP SCARE for me!😱🫣🤔😂

@RebuiltRestored 7 ай бұрын

Lol I didn’t mean to scare ya! 😂

@snappyrepairs6482 Ай бұрын

Can't believe I had to scroll down to 11 comments before I got to someone talking about a lit torch in the cupboard

@zekecorder8226 Жыл бұрын

Very good job. Love to see old tools restored and put back into service. I wish I had a metal lathe and milling machine, but too late now. I'm over 70, no time to begin learning. My dad took a machine shop course in high school and at one time could operate a metal lathe, but I do woodworking and cannot begin to weld or do anything with metal. Oh well, maybe next incarnation?

@RebuiltRestored Жыл бұрын

I would like a lathe as well however, I don’t know to operate one. And it’s not to late to learn! Thanks for the comment! Have a great day!

@marcelovalenzuela8081 Жыл бұрын

Jaja buen comentario saludos desde Uruguay 🇺🇾 nunca es tarde vamos arriba abrazo

@AndreasEUR Жыл бұрын

NEVER too late! If you have space then do it.

@josephnavarro3620 9 ай бұрын

It's never too late buddy. You're 70 but commenting on KZfaq videos so you're very capable. Find something in your area like a machine shop or college campus or somewhere where you can donate some time and also learn the skill that you want to learn. Go do it. Ask the worst they can do is say no. Then go ask again. You can do it.

@htrestore Жыл бұрын

Needless to say, this video is amazing.

@RebuiltRestored Жыл бұрын

Thanks very much!

@instrumentfixer35yearsexp90 Жыл бұрын

Bravo ! bravo! You used a grounding line cord !

@RebuiltRestored Жыл бұрын

Thanks! Happy New Year!👍👍

@tobyw9573 Жыл бұрын

I had one just like that one - A blast from the past.

@RebuiltRestored Жыл бұрын

Awesome! Thanks for watching!

@leonardolobo4370 6 ай бұрын

Um grande profissional 🎉😂

@RebuiltRestored 6 ай бұрын

Thank you very much! I appreciate it!

@keithstegall1961 Жыл бұрын

I like your close-up work with the camera.

@RebuiltRestored Жыл бұрын

Thank you!

@JZ-tg1cm Жыл бұрын

Hang some small, cheep household HVAC air filters on the wall behind the vents. They will keep dust and debris from flying everywhere and keep things a bit cleaner on the wall as time goes by, and they can be replaced easily as they dirty up... They could be a fire hazard if your spraying sparks, so consider that, but if it just dust they could keep things much cleaner around the bench grinder. Nice restoration

@RebuiltRestored Жыл бұрын

Awesome! Thanks for the advice and for watching! Have a great day!

@bryanphillips6088 Жыл бұрын

I actually have this exact same grinder, was my grandfather's. Made many knives and swords with it, this one will definitely serve you well in your shop.

@RebuiltRestored Жыл бұрын

That is awesome! Thanks for the comment!

@shanesgettinghandy Жыл бұрын

Nice job. These projects (and videos) take an awful lot of time. Much respect. Most my videos are substantially smaller projects, and they still take a while!

@RebuiltRestored Жыл бұрын

Thanks @shanesgettinghandy! I appreciate it! Thanks for the view.

@ransomdaniels8395 6 ай бұрын

Better than new!!!😊😊😊😊❤❤❤❤❤❤❤

@RebuiltRestored 6 ай бұрын

Thank you very much!

@AndreasEUR Жыл бұрын

Wow, the difference in sound between old and new bearings

@RebuiltRestored Жыл бұрын

Thanks!

@michelecrown2426 Жыл бұрын

I can't believe you found one so complete and for that price, what a find. Someday I hope to be so lucky. Beautifully done.

@RebuiltRestored Жыл бұрын

Thanks much! I’m happy with it! Have a great day!

@mikeking7470 Жыл бұрын

I have the same grinder, not quite so complete, but gave $35.00 for mine. They are out there but you need a local seller, shipping would kill you.

@Beenthere5409 Жыл бұрын

Shipping not too bad. I sold one from PA and shipped it to TX. $40.

@steve-ph9yg Жыл бұрын

I have the same grinder without the light

@AlanG58 Жыл бұрын

Wonderful job on this old machine! They sure don't build them like this anymore.

@RebuiltRestored Жыл бұрын

Thank you very much! Yes, this was built well.

@ENWILSON 9 ай бұрын

This is my favorite tool in your shop. I had seen it in other videos and did not know it was a restoration.

@RebuiltRestored 9 ай бұрын

Thanks! This is a nice unit to have for sure. Thanks for the comment!

@Beenthere5409 9 ай бұрын

Sure turned out nice!! Great job.

@ELMANN1000 Жыл бұрын

I love old tools. Keep saving them!

@RebuiltRestored Жыл бұрын

Thanks! I have projects in the works. Thanks for watching!

@RestorationVideo Жыл бұрын

*_The original is one of my favourite restorations. You guys do top work. Seriously impressive effort and results._*

@RebuiltRestored Жыл бұрын

Thanks much! Happy New Year! 👍👍👍

@darrendurkee2 Жыл бұрын

Incredible job Mr. R&R!! Lot’s of hard work went into that!

@RebuiltRestored Жыл бұрын

Thanks 👍

@scottkailey1 9 ай бұрын

It's to bad they don't make them like that anymore, very nice job sir.

@RebuiltRestored 9 ай бұрын

Thank you very much! 👍

@markjaycox7524 Жыл бұрын

Well done

@RebuiltRestored Жыл бұрын

Thank you very much! I appreciate it!

@duginvirginia5737 Жыл бұрын

Excellent work. I enjoy the fact they you took time to do the best paint matches that you could and used proper rivets for the data plate. So many times I see people use pop-rivets for this.

@RebuiltRestored Жыл бұрын

Thanks much! I appreciate it! Thanks for watching!

@herbholmberg4474 9 ай бұрын

Beautiful restoration. I restored my block grinder too, but did not go nearly as in depth as you did. I really like how you stuck with the original color scheme.

@RebuiltRestored 9 ай бұрын

Thank you! And I actually get mixed feedback on the color but I like it. Thanks for watching 👍

@herbholmberg4474 9 ай бұрын

@RebuiltRestored You will never please everyone with color choice, but you just can't beat original if you ask me. Keeping original color makes something look new, drastic changes like red, blue, green, etc. screams repaint!

@herbholmberg4474 7 ай бұрын

I could not agree more!

@arnaldocarvalho8990 Жыл бұрын

Great job

@RebuiltRestored Жыл бұрын

Thank you very much!

@jacksnow1703 9 ай бұрын

Nice work. Thanks for sharing.

@RebuiltRestored 9 ай бұрын

Thanks for watching!

@paulquinn5260 Жыл бұрын

What a pleasure to watch. To see this tired old machine but still with life in it bought back to its former glory. Well done Paul uk 🇬🇧

@RebuiltRestored Жыл бұрын

Thanks Paul! I appreciate it! Have a great New Year! Blessings!

@sheldonshelley3949 Жыл бұрын

Hard to explain but this eases my anxiety. Enjoyed the humor as well. Excellent work and color choices! Subscribed

@RebuiltRestored Жыл бұрын

Thank you very much! I’m glad you enjoyed! I appreciate the support!

@JustAnotherGoddess52 2 ай бұрын

Gracias! Me recuerdo de mi juventud, trabajando con mi abuelo. Magnifica restoracion!

@RebuiltRestored 2 ай бұрын

Muchas gracias!

@pascaldurand8083 Жыл бұрын

top job , thank's !!

@RebuiltRestored Жыл бұрын

Thanks much! Happy New Year! 👍

@MrLukealbanese Жыл бұрын

Brilliant work. Be advised however that it is necessary to have thick paper discs either side of the grinding wheel so the metal washers don't bear directly onto the wheel. Prevents cracks!!

@RebuiltRestored Жыл бұрын

Awesome! Thanks for the tip! 👍

@CatalystRestorations Жыл бұрын

5:06 Me too...me too. Also, if you notice the scanning black bars in your footage at 20:19-20:25 you can get rid of them by adjusting your shutter speed to a divisor of 60 if you're in the US (1/60, 1/120, 1/180, etc) or 50 if you're elsewhere in the world (1/50, 1/100, 1/150, etc). This corresponds to 60 Hz or 50 Hz frequency of the electricity. There's also some cameras that have an anti-flicker setting that automatically adjust for it!

@RebuiltRestored Жыл бұрын

Thanks. I appreciate the advice. I will have to try to adjust that. Thanks so much! Have a blessed day!

@elsdp-4560 9 ай бұрын

Thank you for sharing. Once again very nice👍

@RebuiltRestored 9 ай бұрын

Thanks for watching! 👍

@gmtech26358 Жыл бұрын

The classic block grinders are bulletproof. I have my grandfather's and use it without worry.

@RebuiltRestored Жыл бұрын

Very cool! Thanks for the comment!

@jackaldesign1196 8 ай бұрын

A remarkable rebuild and restoration. I too restore tools rather than buy new and can appreciate the effort you put in. With brain and hand, a job masterfully done! Thanks for sharing!

@RebuiltRestored 8 ай бұрын

Thank you very much! Keep up the good work and have a great day!

@emiliodonate Жыл бұрын

Incredible work. I like the paint scheme a lot too.

@RebuiltRestored Жыл бұрын

Thanks! Finally someone likes the paint! 😂😂👍👍

@jeffr0 Жыл бұрын

really first rate restoration made me a subscriber

@RebuiltRestored Жыл бұрын

I appreciate that! A very Happy New Year to you!

@luiscoterachavez9086 Жыл бұрын

Hermosa máquina.

@RebuiltRestored Жыл бұрын

Thank you very much!

@billboyles7469 Жыл бұрын

Fantastic job. I love to watch videos that don’t have a bunch of unnecessary talking. Good skills too. I’m a new subscriber for sure. Thanks.

@dannyhenson3141 Жыл бұрын

Wow u did a fantastic job on it. It looks great

@RebuiltRestored Жыл бұрын

I appreciate it!

@dannyhenson3141 Жыл бұрын

@@RebuiltRestored Your welcome. You did a great job

@waltkowalski2347 Жыл бұрын

Great job. Perfect. Hello from Brazil.

@RebuiltRestored Жыл бұрын

Thank you very much! Have a great day!

@michaelbell7465 6 ай бұрын

I have the same Craftsman Bench Grinder my father bought in the 60's.

@RebuiltRestored 6 ай бұрын

Very cool! These are pretty sweet. Beefy machines. Thanks for watching and have a great week!

@quantumleap359 Жыл бұрын

Nice restoration, beautiful welding. Bravo!

@RebuiltRestored Жыл бұрын

Thanks much! Thanks for watching!

@winterborne1 Жыл бұрын

One of the better restorations that I have seen so far. Great job!!

@RebuiltRestored Жыл бұрын

Thanks so much!!

@nannymac47 3 ай бұрын

You are so talented. Men like you amaze me.

@markchizmadia2004 5 ай бұрын

Your restoration work and attention to detail are top-notch! The old school receptacle is icing on the cake. The human mind and the human hands are truly awesome machines !

@RebuiltRestored 4 ай бұрын

Thank you very much!

@myblues6532 Жыл бұрын

Great job. This brought back some good memories, my dad had the same bench grinder in his welding shop. Thanks for sharing this!

@RebuiltRestored Жыл бұрын

Very cool! Thanks for the comment!

@brianwood5220 Жыл бұрын

Such a beautiful job, you should be proud. Thanks for sharing.

@RebuiltRestored Жыл бұрын

Thank you very much!

@davidflarrety9655 9 ай бұрын

Lovely work

@RebuiltRestored 9 ай бұрын

Thank you!

@coreyyoung186 Жыл бұрын

Very nice job

@RebuiltRestored Жыл бұрын

Thank you very much!

@AnDIY_Handmade_Restoration Жыл бұрын

Excellent restoration of a good instrument. I hope to see it at work in your next restoration projects.

@RebuiltRestored Жыл бұрын

Thanks! You’ll see it again! 👀

@asyouwererestorations8964 Жыл бұрын

Very nice! A good bench grinder with wire wheel, polishing wheel, and grinding wheel combination should be a must for any shop.

@RebuiltRestored Жыл бұрын

Thank you! And yes, I am happy to add this one to my shop! Have a great day!

@daveys Жыл бұрын

Nice job, well done!

@RebuiltRestored Жыл бұрын

Thanks much!

@jjsisco 2 ай бұрын

Better than new, excellent workmanship

@RebuiltRestored 2 ай бұрын

Thank you very much!

@davegrummett1263 Жыл бұрын

I really enjoy how with the exception of a couple small casting defects you touched up before painting you left the rest of the casting pretty much as it was. I see a lot of restoration videos that file everything casting line, bump or blemish smooth and perfect. They lose a lot of the character that way I think.

@RebuiltRestored Жыл бұрын

Thanks much! I appreciate it. Yeah the roughness gives it some character. Thanks for giving me your feedback!

@georgequalls5043 Жыл бұрын

By the looks of your clean and pristine shop, the grinder will stay as pretty as the day you finished it. 😅 32:39

@windmillacres679 Жыл бұрын

This one was a pretty good casting. Sure, it had some roughness to it. However, it was even and well made. Leave it as it is. Now, if it was uneven with big pits....fill and smooth it.

@sushimanunit356 Жыл бұрын

Hermoso simplemente hermoso. Manito arriba y suscribo. Gracias por compartir tu restauración. Saludos desde Luján Buenos Aires Argentina.....

@RebuiltRestored Жыл бұрын

Greetings to you! Thanks for the comment and for subscribing! I appreciate it!

@madmanmechanic8847 Жыл бұрын

I am trying to get my own You tub channel started.Two projects I want to do is one, I have an old school die grinder with the flexlible shaft in the original wood box from the 40s more than likely . I bought it off of Ebay from and estate of a jeweler . I am going to do a youtube video on that and I also have an American Made solvent tank I am going to restore and also to that on on KZfaq its probably over 50 years old .I already have the pump and found and American made parts cleaning brush for it too. I love old school tools they will never make things like this again and love to see them restored the pride and craftsmanship is dead and gone and will never be back . Great job I love it

@RebuiltRestored Жыл бұрын

Awesome Mad Man Mechanics! And you should totally start a channel! The die grinder sounds neat. Good luck on the channel and your projects! Keep me posted! Thanks for the comment and for the view! Have a blessed day!

@madmanmechanic8847 Жыл бұрын

@@RebuiltRestored Wow I havent had anybody give me that much support in so long I forgot what is was like! Been down in the dumps with the cold icy weather and I havent been able to get any of my projects worked on and it is driving me nuts. I have been trying to get my Chevelle restored and that is shut down too. I am doing a frame off. Its a factory Heavy Chevy they only made for two years its a matching number factory four speed car. I want to do the rest on You tube if everything goes good. You really made my day I cannot thank you enough you really cheered me up and have given me incentive to launch my youtube. I am very nervous I am still learning editing but all the youtubers tell me the same thing. Hey we were nervous too and we just did that first post and that is all you need to do. My first video is going to be about a Jet Ski it never had the oil changed on it and the oil filter was frozen on there and I could not get it off even with a pair of huge channel locks. No room I had to take the inside of the ski apart and half the part of the engine apart to get to the oil filter it kicked my ass. This is going to be my first post. Your reply really cheered me up and I really needed it . Had three people in the past week treat me really bad so I was really down in the dumps. I need to move out of here so bad the people are horrible here and I am working on that too. Thank you thank you for cheering me up you made my day dude I really needed this ! 😉😉😉😉😉😉😉😉😉

@stevenw1005 9 ай бұрын

That grinder came out really nice. I wasn’t sure if the finish was in the paint or in the metal before you stripped it. But the hammered finish paint made it look good. I have my grandfathers old Black and Decker bench grinder. Still works fantastic. When I got it, I cleaned it up and replaced the power cord. The original one was all dried out and very brittle. Plus it wasn’t grounded. The new cord was the same size wire with a ground and I drilled and tapped a boss on the bottom of the grinder to ground it. Seeing how yours came out, I might do an overhaul on it soon. Anyway, great video!

@RebuiltRestored 9 ай бұрын

Very cool! It’s always cool when you can keep a family tool and keep using it. Paint it up nice and don’t ever sell it! Thanks for sharing and for the view! Have a great day! 👍

@stevenw1005 9 ай бұрын

@@RebuiltRestored Thank you for your comments. I really have no intention of getting rid of it. Much like the Craftsman grinder you gave a new life to, my old Black and Decker is built the same way. Back then, these companies made good quality products. Unfortunately, today the newer stuff isn’t built as well.

@More-Space-In-Ear Жыл бұрын

Awesome restore buddy, quite fancy one of those beasts in my workshop, last longer than the ones we get these days that's for sure. We'll done ✔️

@RebuiltRestored Жыл бұрын

Thanks much! I appreciate it!

@garageshopminnesota Жыл бұрын

That was an awesome video! I love those old Craftsman grinders and have cleaned up and replaced bearings on several. Just a suggestion, but I would loosen the bolts that attach the grinder to the stand. Looks like you squeezed the rubber feet down pretty tight. If you loosen the bolts a bit, that would allow the rubber feet to take up some of the vibration on the grinder and make it run smoother. Great video and great work! Thank you for sharing!

@RebuiltRestored Жыл бұрын

Thanks you! Thanks for the advice! Advice is welcome here! I appreciate the view and feed back!