Using paper towel to tighten up bearings in the Transmission case. This made a huge difference in all the slop of the spur gear and output shafts!
Пікірлер: 30
@carloswright6 ай бұрын
5 years after you made this and it helped me a lot. I bought a cheap 10ii dig transmission, and this took all the slop out of the input shaft. Good stuff right here.
@BMJAUDI5 ай бұрын
Thanks Carlos. Glad it helped! Happy RC’ing
@markfunnell58155 жыл бұрын
Hi Great video, had exactly the same issue with my Axial crc (not that old !!) and I've done exactly the same to bearings ( same as you been a mechanic for 25yrs good trick !) I also found a spacer that fitted ( interference fit) inside the plastic housing of spur gear shaft and drilled a 5mm hole in it for shaft seems to work , time will tell 👍👍
@AVRCgarage2 жыл бұрын
Thank you for Great tips..
@derrickmanning25976 ай бұрын
Another extra you can add is a bearing behind the spur gear as it only has the one on the 'box itself,I had a bearing kicking about that was a snug push fit and a proper fit on the shaft. Makes a difference to the gear alignment and also makes it a little smoother! I know they were made to a price but I'd have paid an extra couple pounds at purchase for the benefit. Also instead of stressing the plastic gearcase,thin super glue will do the job and fill the gap,a light wipe with grease or light oil on the bearing will stop it from sticking in but the glue will fill the gap nicely! Give it a go if you feel confident,I use a specialist bearing glue on bike engines that helps with slack bearing housings so a similar thing,and not everyone has a tube of bearing glue but super glue works just don't forget the grease or oil!
@BMJAUDI5 ай бұрын
That’s a really great tip Derrick! Thanks for sharing that.
@derrickmanning25975 ай бұрын
@@BMJAUDI no problem,I'm new to these,I've heard they're good trucks but the lack of support behind the spur was a shock! I've also got a cross RC demon,now that's a crawler! Both rugs needed some work but happy with both. And the cross demon coming in at a shade under 4kg it's a heavy rig and will go just about anywhere. Keep up the good work! Derrick.
@HS3INDUSTRIES Жыл бұрын
This looks amazing I will do this
@joefloyd8173 жыл бұрын
Thanks for the good information sir also the video is well done
@dirtyhabitz28884 жыл бұрын
Great tip, thanks for sharing 👍
@jjkeaton70855 жыл бұрын
Pretty damn smart. Might just have to do this.
@BMJAUDI5 жыл бұрын
JJ Keaton Thanks! It has continued to work perfectly and keep all that excess slop out of driveline.
@workzandhobby82733 жыл бұрын
Thanks for these info and tips. .🙏😊
@tomv33614 жыл бұрын
Nice!
@michaeltejeda94952 жыл бұрын
Thanks for your explanation, but I wish that the transmission of the crown could help me to have more force to climb rocks stronger better for my 2 speed transmission for an alxial SCX 10 2 1/10 Rc and a pinion for a 550 35T engine
@garytreverton-black36934 жыл бұрын
Would aluminium foil work better? My scx10 ii kit was the same and also made a clicking noise
@BMJAUDI3 жыл бұрын
That could be worth a try but might be too thick! Maybe not if you buy the off brand stuff? Would hold up better than paper. Good thinking
@BuckFPV Жыл бұрын
I'm reading the comments and your replies. Are you saying this held up for over two years and still no slop in the bearings?
@BMJAUDI Жыл бұрын
Yes, It will last a long while.
@tobynuanes3464 жыл бұрын
Good idea im going to to try with a plastic bag might hold up a bit better if i get it wet
@BMJAUDI4 жыл бұрын
Plastic bag is a great idea!
@tomv33614 жыл бұрын
That would be too thin
@rcaxialscx102 жыл бұрын
won't the grease eat the paper ?
@BMJAUDI2 жыл бұрын
There’s really no grease between the housing and bearing. Have had no issues running like this and things are still nice and tight with no slop
@Voodoofire14 жыл бұрын
Really ticks me off that we have to do this to an expensive toy, seems like Axial has dropped the ball on quality lately, getting to be the Matchbox of the RC world.
@BMJAUDI4 жыл бұрын
I couldn't agree with you more!!
@envybass4566 Жыл бұрын
I have experienced this issue on every single 3 gear I've owned. Vp and hot racing cases included. I have a secret that adds a 3rd bearing to the top shaft. Eliminating all slop.
@BlvlWmpower4 жыл бұрын
This pisses me off. Is the kit the same way????
@BMJAUDI4 жыл бұрын
I think the kit trans is different. It still may have the same slop issue though! Hopefully someone else on here can weigh in on it.
@tomv33614 жыл бұрын
R u kidding me, lol that's ridiculous, I'm going to get the trx4 instead