B20 VTEC Build Guide : B16 Cylinder Head = 8k Rpm Screaming Honda / Mod My CRV RD1
Рет қаралды 54,070
Жыл бұрынGates timing belt & water pump kit amzn.to/3WoQsAs
Mod My CRV build Series
*If the video was helpful, remember to give it a "thumbs up" and consider subscribing.* Thanks For Watching and Please Subscribe kzfaq.info_c...
This Song was Downloaded Here www.epidemicsound.com/referra...
Royalty Free Music Provided By Epidemicsound
Contact Me At:
Facebook: / thelatemodeltech
InstaGram: / thelatemodeltech2.0
Pinterest: / thelatemodeltech
________________________
DISCLAIMER
Some of the links above are affiliate links, where I earn a small commission if you click on the link and purchase an item. You are not obligated to do so, but it does help fund these videos in hopes of bringing value to you!
As an Amazon Associate I earn from qualifying purchases.
(paid link)
For sponsorship, product reviews, and collaboration, you can email me here: thelatemodeltech@gmail.com
________________________
#TheLateModelTech
@devindean1167 Жыл бұрын
Finally! So tired of reading arguments on forums. Don’t leave a thing out man!
@Donnythelatemodeltech Жыл бұрын
Thanks for sharing Devin. 👍!
@Michal_S0L Жыл бұрын
I agree, I discovered more overlooked things watching your videos than reading those old forums
@afgaming3609 Жыл бұрын
Much agreed thank you for documenting this process
@LevelUpMechanics Жыл бұрын
Looks great 👍 I can't wait to see the finished build! 😁
@quinton7854 8 ай бұрын
great video, im planning on doing this whenever i get home from the military to my DA but bought the LS/V package from JHP so now the big problem is finding the right head
@LemondzzPvP Жыл бұрын
Only thing that would make this better is links to the products that you bought but thank you so much for this video!
@Donnythelatemodeltech Жыл бұрын
I can add links, but I really didn't buy most of this trough Amazon. What did you need?
@LemondzzPvP Жыл бұрын
@@Donnythelatemodeltech my bad just now seeing this, where did you pick up the head plug, and the vtec oil return line? also a link to the gates water pump kit would be sweet
@L.I.F.E_grows 9 ай бұрын
Yes I have a 301 k manual 2000 crv that I'm currently about to do this to and your video was greatly appreciated I will be tryna daily boost it with the s1 build driveshaft and locking plates cuz those stock driveshafts arent too great with more power
@JJBanuelos Жыл бұрын
Coming along pretty nice! Part 2 looks to be a little spicy
@BHKseries72 5 ай бұрын
I have 99’ Honda crv m/t thinking about install B16A heads, also want OBD1 conversions. Delete crank position sensor, knock sensors and eliminate down streams O2 sensors. Love it ❤ good job!
@TradingBotWizard Ай бұрын
Amazing video. 🙌 The B20 distributor does work in fact, but you have to cut an ear off to make it fit, and only one bolt will line up to attach it to the head. Not ideal, but it does work, if someone wants to go budget, or, if they want to just get it running before their new distributor comes in
@SRDmotorsports Жыл бұрын
Awesome video and that RD1 is just right up my taste!!! always been a fan of RD1 but this time your crv 😊
@Donnythelatemodeltech Жыл бұрын
Thanks man, you got a nice channel brother!
@SRDmotorsports Жыл бұрын
@@Donnythelatemodeltech thank you::: love how your rd1 sounds sadly we on the other side of the world for a beer 😅
@Donnythelatemodeltech Жыл бұрын
@@SRDmotorsports 🍻
@kalmtraveler 3 ай бұрын
great video! I always wanted to do something like this on my old Prelude that had the grandfather B-series, B20A but it was a bit more work because in addition to the oil supply, we had to slightly open up I think the 4 outer most head bolt holes (like the belt side and transmission sides of the motor) since those were slightly not in line with the newer B series heads, and that pretty much meant requiring a custom head gasket too instead of using its original, or a VTEC head gasket. Unrelated though - if you wanted to take it one step further, get some Integra Type R style pistons for the CRV block for extra compression and thus more high end power, and some beefier connecting rods to handle the higher RPMs long term.
@Camo-Dan 4 ай бұрын
Great video, loved watching this . I want to have a b series b20 in my crx someday. Your garage is well lit and so nice! Super fun.
@Donnythelatemodeltech 4 ай бұрын
Always wanted a CRX. Most appreciated Dan. Take care man
@Jason-nk4yr Жыл бұрын
Liking the upgrades
@doubleclutchin6860 Жыл бұрын
Awesome video bro! Very good information. Looking forward to your next video. I still want to do a budget Honda build after my 32. BTW, very nice PPE on your steal toe shoe lol. You know, that's the real master tech right there. 😁
@Donnythelatemodeltech Жыл бұрын
😆, I know you have the same work shoes bro..lol.
@doubleclutchin6860 Жыл бұрын
@@Donnythelatemodeltech I do actually 😂😂😂😂
@kungfujiujitsufliptrick4832 9 ай бұрын
Thank you so much sir you gave me confidence to this to my b20 (someday) you explain everything so easily
@Donnythelatemodeltech 9 ай бұрын
All the best
@lunlun2930 5 ай бұрын
@@Donnythelatemodeltech will the b20 with vtec cam have reliability issue?
@jonathannieves1758 Жыл бұрын
Great work bro! Can’t wait to start working on mine 🔥
@Donnythelatemodeltech Жыл бұрын
Thanks Brother 👍!
@C4vts180 8 ай бұрын
Just found your channel. Your content is badass. Keep going ma friend. And i am sure that crv wants k24 block with k20 head😈
@Donnythelatemodeltech 8 ай бұрын
Appreciate it!! And yes when this b series pops, k series is going in.
@saleplains 2 ай бұрын
i wanna do this so bad. i love my '00 CR-V but it is a bit low on power especially on long climbs at freeway speeds. excellent video.
@bigjoel360 Жыл бұрын
Like the safety shoes 👟 😂!
@Donnythelatemodeltech Жыл бұрын
Lol, the adidas slides are super comfortable, lol.
@almightyfrijolero4775 9 ай бұрын
when doing the swap what kind of head gasket did u use cus in having trouble with mine
@jacksonevans9378 Жыл бұрын
You’ve kept the original cams and valve cover for this swap?
@peterbryant3584 8 ай бұрын
Great explanation nice video bro
@Donnythelatemodeltech 7 ай бұрын
Most appreciated!
@LinearJaguar_7JR Ай бұрын
Does the new oil fitting on the head have a torque spec?
@anthonychavira578 5 ай бұрын
What hoses did you get for radiator I bought a car that this was already done to it its in a 2000 EM1 civic want to change hoses but everything I order I always have to send back because nothing ever fits ...
@CaptainTexas92 Жыл бұрын
Another banger. Still debating on Vtec/non Vtec just for the reliability sake. I forgot to ask you on the other video, being that your throttle body and IACV are automatic transmission units have you been having erratic idle issues?
@Donnythelatemodeltech Жыл бұрын
So after the manual swap i did go to a manual throttle body and ecu.. / the car wouldn't idle high enough with the ac on... the compressor would kick on and off. Even with the ecu and throttle body. /Now the car is vtec, I'm running a socketed obd 1 ecu - p28. Using honda tuning suite it idles great, I have full control of the idle... ac on and off. Its a wonderful tool. So, it is more reliable now than ever... I see and control everything.
@CaptainTexas92 Жыл бұрын
@@Donnythelatemodeltech that’s what I heard. Apparently the only way to totally fix it is to run M/T harnesses, IACV, and T/B. Thanks for the update good to know.
@dc5_nano935 Жыл бұрын
What head gasket did you use for head ?
@abelbalderrama7380 2 ай бұрын
What head gasket did you use please and thanks
@dr.mantistoboggan4746 10 ай бұрын
Where does your compression end up?
@pablom8854 7 ай бұрын
What injectors would you recommend for a stock B18? I'll upgrade to VTEC probably next year but I kinda need new injectors now :S
@23ontrack 3 ай бұрын
Great video explaining I have a question what oil pump did u use? 👍🏽👍🏽
@Donnythelatemodeltech 3 ай бұрын
ACL race
@juanmolina862 10 ай бұрын
With b20 should I buy b20b or b20z to put a b16 head?
@nevertooslow7254 10 ай бұрын
What mm gasket did you use for this
@AdinSLaboy Жыл бұрын
love it
@Donnythelatemodeltech Жыл бұрын
Thanks for sharing bro!
@emmanuelherrera9348 6 ай бұрын
What size is the fitting for the oil line?
@lingling6021 2 ай бұрын
Did you do anything to the block or is it all stock? In all the forums i would read in people would say to us different rods and pistons and back and forth arguments
@Donnythelatemodeltech 2 ай бұрын
Its stock
@u2asian456 Жыл бұрын
@Donnythelatemodeltech Thanks Donnie for the series. Trying to have all the parts on hand when I do my conversion. What radiator hose did you go with? Have a part number or link?
@Donnythelatemodeltech Жыл бұрын
amzn.to/3lRD3TM
@Donnythelatemodeltech Жыл бұрын
Some of those details are in this video kzfaq.info/get/bejne/ebOmn7qIrNrJYI0.html
@u2asian456 Жыл бұрын
Thank you. I somehow missed it in that video.
@u2asian456 Жыл бұрын
@@Donnythelatemodeltech Sorry man, one more...What B16/B20 step-down dowel pins did you buy that went over the APR head studs? There are some you have to ream out and I'd rather not have to do that.
@Donnythelatemodeltech Жыл бұрын
@@u2asian456 this is the listing www.ebay.com/itm/221083079390?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=A-xZDM8EQ2q&sssrc=2349624&ssuid=7NvwI_1ZS1i&var=&widget_ver=artemis&media=COPY
@andrearce1099 9 ай бұрын
I bought a car with this setup boosted. Wanting to tune it up and get it tuned. When looking for spark plugs and wires, am i getting those for the b16 motor? Or is it wires for a b16 and plugs for a b20? Someone please help me
@maganamfg Ай бұрын
can you use a b16 water pump instead of b18?
@marvinreyes6270 11 ай бұрын
Hi i have b20 none vtec i will change vtec head how is the wiring im using p28 ecu
@andrewlopez8110 2 ай бұрын
First time doing a head swap, what brand and size torque wrench you using? Thanks in afvance
@Donnythelatemodeltech 2 ай бұрын
1/2 snapon
@billiedean9218 2 ай бұрын
I'm doing a 98 crv 5 speed manual with itr head. What exhaust manifold or header do I use? Do I get a b20 header or one for the head
@Donnythelatemodeltech 2 ай бұрын
Got to use an b20 awd header. The pipe is going to need to have a curve in it to clear the awd transmission.
@mcea91 10 ай бұрын
Does taking the oil from before the oil filter lower oil psi, require more oil to run or starve the system from lubrication?
@Donnythelatemodeltech 9 ай бұрын
I don’t think it affects the psi, I do run alittle more oil though
@DeputyMikesRc 4 ай бұрын
Where did you get all your hardware? Like the plug to stop the oil on the head
@Donnythelatemodeltech 4 ай бұрын
It’s a blox VTEC kit
@DeputyMikesRc 4 ай бұрын
@@Donnythelatemodeltech great 👍 thanks
@sanityapparel Жыл бұрын
This looks like a fun projects, will it pass smog? Or you don't have to where you are?
@Donnythelatemodeltech Жыл бұрын
No smog in Texas. Its converted to ob1... so I will not be able to renew the registration this year.. but next year it just has to pass a safety inspection and I'm good.
@sanityapparel Жыл бұрын
@@Donnythelatemodeltech Awesome! Everything here has to be 1976 or earlier to be smog exempt. Otherwise you need a special exception that takes an act of god to be given.
@turbodc2002 7 ай бұрын
Did you have to take the head or block to machine shop prior to install?
@Donnythelatemodeltech 7 ай бұрын
I would recommend it.
@ekelo Жыл бұрын
made it look so ez
@alexgg7499 7 ай бұрын
Where does the b 16 head came from which car? Im new at this
@Donnythelatemodeltech 7 ай бұрын
1999 civic si
@angusmustill3281 Жыл бұрын
Does the head need to be bored to work?
@Donnythelatemodeltech Жыл бұрын
Best , to have the head resurfaced before installation.
@TrackSol Жыл бұрын
Can you rev to 8K rpm with the stock B20 rods?
@Donnythelatemodeltech Жыл бұрын
I can, but, no sure for how long.
@TrackSol Жыл бұрын
@@Donnythelatemodeltech Haha, SEND IT!
@thetigertooth4896 Ай бұрын
Off topic but you look like marks long lost brother lol
@jefunftmarket9132 6 ай бұрын
Dowel pin go to intake side?
@Donnythelatemodeltech 6 ай бұрын
Recommend exhaust side, I don’t it really matters …….
@thebigone6298 3 ай бұрын
In your opinion, why do many people prefer to use Vtec instead of Mivec
@MrBulagor Жыл бұрын
👍👍👍
@marvinreyes6270 Жыл бұрын
Hi bro just asking if my engine b20 im using gsr head
@Donnythelatemodeltech Жыл бұрын
What’s up?
@tommygauthier2574 7 ай бұрын
What does your tune look like in this thing?are you able to send me the map?
@Donnythelatemodeltech 7 ай бұрын
Street tune, you probably wouldn’t want it
@whatsbehindu 7 ай бұрын
is that a stock bottom end?
@Donnythelatemodeltech 7 ай бұрын
Yes
@whatsbehindu 7 ай бұрын
@@Donnythelatemodeltech how has it held up? do u worry when revving high?
@OilLightReset 7 ай бұрын
@@whatsbehindu holding up fine, I did lower the rev limit to 7800
@whatsbehindu 7 ай бұрын
@@OilLightReset oh okay cool
@jdmgatekeeper5849 Жыл бұрын
Im so confused on the part where you torque the head bolts. Overall it’s 80ft pounds. So you first torque it to 20 and then you torque it to 60? Aren’t you supposed to go 20 first and then 80?
@Donnythelatemodeltech Жыл бұрын
20 60 80 with arp studs. Oem bolts 20 60. I didn't record the 80ftlbs step. I got a phone call during the recording and just forgot.
@jdmgatekeeper5849 Жыл бұрын
@@Donnythelatemodeltech makes total sense now. Thank you!
@TheMrmagic101 Жыл бұрын
Why the type r water pump?
@Donnythelatemodeltech Жыл бұрын
Teeth
@TheMrmagic101 Жыл бұрын
@@Donnythelatemodeltech more teeth more cooling more redline?
@Donnythelatemodeltech Жыл бұрын
No, more teeth = larger pulley. Correct length for the timing belt.
@ConnorPawlowski Жыл бұрын
can someone post up the gates timing kit he used in this video?
@Donnythelatemodeltech Жыл бұрын
Links in the description now. amzn.to/3WoQsAs
@ConnorPawlowski Жыл бұрын
@Donny The Late Model Tech thanks, I picked up my 01 awd crv today so I'm prepping for next month. Head already has a burnt valve so perfect time
@ConnorPawlowski Жыл бұрын
@@Donnythelatemodeltech One more question, did you just use a b16 coolant inlet housing? or what engine did you get that from? and then which hose did you use?
@dr.mantistoboggan4746 10 ай бұрын
The Aisin kit on rock auto is better, uses mitsuboshi belt too.
@LeeSkJohn-sv8wi 2 ай бұрын
Philippines people must wake up to the fact that eez is not Philippines territory. It's international waters. Eez Entitlement to resources does not meant entitlement to the territory of china and Taiwan. China and Taiwan owns SCS before unclos even existed.
@martinrascon1350 Жыл бұрын
Vtec more work than its worth
@itr-my9eq Жыл бұрын
U think so?
@Donnythelatemodeltech Жыл бұрын
Honestly, it's a great upgraded , the car definitely has way more get up and go. Totally worth it to me.
@itr-my9eq Жыл бұрын
@@Donnythelatemodeltech could you make a video of it running? I have a b18cr head laying around and a 98 crv 5MT I was thinking of doing this upgrade. Curious to see how it goes
@Donnythelatemodeltech Жыл бұрын
@96itr69 oh yeah, I've got some editing to do and will have it up hopefully next Friday.
@itr-my9eq Жыл бұрын
@@Donnythelatemodeltech awesome 👌
Donny The Late Model Tech
Рет қаралды 15 М.
REALSTREETPERFORMANCE
Рет қаралды 101 М.
Nice Guy Garage
Рет қаралды 6 М.
That Racing Channel
Рет қаралды 447 М.
adacargadgets
Рет қаралды 3 МЛН