Babyliss Skeleton Trimmers easy zerogap and info

Рет қаралды 59,122

5 жыл бұрын

These trimmers are beast. Im,glad i bought them. They are easy to zerogap and cut super sharp. Heres some quick info on them too. Like,comment and subscribe.

Пікірлер: 113

@ckiddadahairninja4377 4 жыл бұрын

Dope video bro. I just subscribed due to your expertise on adjusting the gold fxs.... Perfect adjustment. Gratitude fam

@anthonyligon8220 3 жыл бұрын

man you killed !! im a barber and that lean the machine back was genius

@funknfade1705 4 жыл бұрын

Straight to the point! Loved this!

@she_luv4 3 жыл бұрын

I just got some and man these clippers are just FIRE!

@calstizzle 4 жыл бұрын

Great vid. These are definitely some hittaz! Much respect. 💯

@beardgang1274 4 жыл бұрын

Bruh thank u. Got my boys HITTING SO HARD

@hustlerslim5948 3 жыл бұрын

Just got a pair and could not get them adjusted until the lean tip. Great vid

@Epilepsywarrior 4 жыл бұрын

Best Damn Trimmers Ever!!!!! Thank you 🙏🏾

@tommyg4479 5 жыл бұрын

Can you do a update on your barber station?! And if you using any new products or tools do some reviews. Glad to see u back dude!

@kikado3 5 жыл бұрын

Yes i can. Its definitely evolved over the years. Thanks for the support

@michelleharris6315 Жыл бұрын

Short and to the point 🙌🏽

@barberfidel3194 5 жыл бұрын

Dope review! 👏👏👏👊🏻💈✂️

@dhahdmoh9830 4 жыл бұрын

Solid review thanks bro.

@omarrhoden5442 5 жыл бұрын

I can’t wait to get mine

@adriantristan2921 4 жыл бұрын

Best review I seen out on KZfaq ‼️

@xionarmor5792 5 жыл бұрын

Awesome review 🙋‍♂️🙋‍♂️🙋‍♂️

@zukamotonn 5 жыл бұрын

I just got mine a couple days ago. They truly are a game changer

@kikado3 5 жыл бұрын

Straight fire bro

@nickmazer2900 5 жыл бұрын

Can you get in Uk ?

@emanubarber2168 5 жыл бұрын

Só queria saber que câmera que esse gringo tá usando, ela foca e desfoca muito bem, e essa máquina Skeleton ainda não chegou no Brasil, aqui as coisas são muito atrasadas mesmo

@slainepena8471 3 жыл бұрын

Nice job

@Barberev 4 жыл бұрын

Hey bud thanks for this great review! I have a question that you might be able to help. I adjust the blade and looks pretty even and close but for some reason no matter what I do the right corner bites a little? Is there anything you can tell me? There are 3 barbers in my shop and I’m the only one with them and we can’t figure it out? Thanks man

@kikado3 4 жыл бұрын

Weird their rotary and shouldn’t do that.hold the edges of the blade and see if one side hits your finger harder than the other while running. If so unloose top screws and adjust the top blade left or right slightly and retighten.might fix your problem but it might not. Lmk

@elcocorote84 4 жыл бұрын

That’s exactly how I zero GAp all my tools well trimmers . Great work man

@BinOtaiAA 4 жыл бұрын

Hello ricardo, is it working with 220v? Or just 110v! Regards.

@TRAVELBARBERLIFE 5 жыл бұрын

My man Ricardo! It’s been awhile

@kikado3 5 жыл бұрын

Im here just need heads to cut lol

@byronb3041 Жыл бұрын

Just got mine a couple weeks ago but with the black dlc blade on it. I been hearing that the gold blade hits harder thinking about swapping it

@sg-wx7gq 4 жыл бұрын

I use a Andis T Outliner to do a full cut can these cut as close and handle a full cut before balding out a head? Thanks

@user-gg7bl9hr3v 4 жыл бұрын

how many grams is this machine? lighter or heavier than a detailer?

@mirchesamardjioski3478 4 жыл бұрын

Whay in same babyliss gold fx is written,3 hours running and in same is 2 hours. And they look totally the same?? And they go from 130€-400€. What is the difference?

@evan.norwalkcalifornia562 2 жыл бұрын

Gracias my boi

@omarrhoden5442 5 жыл бұрын

You on point about that’s blade very thin

@Cellus002 2 жыл бұрын

Thank you sir!

@frantzromeus8231 2 жыл бұрын

Thank u …✊🏾💈

@MrShoeGame409 4 жыл бұрын

The tool i got to loosen up the screws under the blade is either too small for the screws or it stripped the screws already. Does anybody else had this problem?

@Flawdaboishawn 4 жыл бұрын

I like them but why do they get so loud??

@OGPapiFresc 4 жыл бұрын

Just got this and mine came with a zero gap tool and no fx blade 🤔

@Botzz28 4 жыл бұрын

Do they sell clips for this trimmer ?

@henrypolo2597 5 жыл бұрын

I got these and use them daily at a busy shop. One HUGE downside is that they get super loud the second I spray Cool Care on them between cuts. They stay loud for a while and it's killing me. I'm about to return these and buy the cordless T-Outliner again.

@marcthebarber239 5 жыл бұрын

Don't use cool care on em they are trimmers, completely unnessecary just brush them with the cleaning tool it comes with

@gamebred5x 4 жыл бұрын

@@marcthebarber239 why is it unnecessary to sanitize the tool??

@marcthebarber239 4 жыл бұрын

@@gamebred5x because If you consistently brush them off and clean them you don't gotta spray a sanitizer on them unless your cutting homeless people

@VISlXVI 4 жыл бұрын

432Marc i disagree.. you must sanitize your clippers after every couple cuts at least.. Sorry just how i rock.

@henrypolo2597 4 жыл бұрын

@@VISlXVI I agree! I ended up returning my Babyliss Skeletons, purchased the new Wahl Cordless Detailer Li and sold those. I didn't like how they hit. I did just recently purchased the T-Outliner Cordless and the GTX blade. Hittassss and it doesn't matter how much I disinfect them, they are silent. Super happy with my decision. Now waiting on the Cordless Master to drop.

@grgeorgiadis 3 жыл бұрын

I have that on gunsteel color but I have heat issues on the first haircut. You have the same problem on gold?

@kikado3 3 жыл бұрын

No never had this issue. Blade might heat up after long use which is no problem but the clipper never gets hot at all.

@LuisMartinez-it6rm 4 жыл бұрын

I zero gap them and when I do hairlines or line someone up they don’t feel anything but once I do beard, it pulls and starts cutting, any solutions?

@kikado3 4 жыл бұрын

Yes. You have to hold the cliplers flat to the head when shaving down hair. Its basically a fade blade so it can pull skin if you dont.

@pgjc756 2 жыл бұрын

Now in 2021...would you get the Gold FX or the Black Influencer Deep Tooth trimmers? I like the black ones better but I don't know if they will be as good. Thanks Ricardo!

@kikado3 2 жыл бұрын

The black ones were made better with smoother blade but im sticking with the original golds because it's the sharpest blade they made.

@pgjc756 2 жыл бұрын

@@kikado3 thanks brother!

@kayilla6413 5 жыл бұрын

upload more often man

@kikado3 5 жыл бұрын

Kids are a bit older, saturdays are now free and i just resigned with my youtube company. More on the way bro

@MajikMuzq 4 жыл бұрын

Anyone know where i can purchase a replacement zero-gap tool kit the little screw driver to loosen and tighten the blades broke from its handle😧

@kikado3 4 жыл бұрын

Bring trimmer to home depot they have plent of allen wrenches that would fit.

@MajikMuzq 4 жыл бұрын

Ricardo The Barber word ok kool I didnt know 👍🏾

@alphacharlie65ms 5 жыл бұрын

Do you have any of their clippers? If so, do you like them and can you zerogap them easy also?

@kikado3 5 жыл бұрын

Yes i do. You can zero gap them but i hated both pair of clippers i had and got rid of them.

@sellaitems9315 4 жыл бұрын

Can i use wahl clipper oil on babyliss clippers?

@kikado3 4 жыл бұрын

Yes

@marcusmattox3627 4 жыл бұрын

Do the blades or the clippers it self get hot fast

@kikado3 4 жыл бұрын

These are not too bad.

@BilalBilal-qk3zx 4 жыл бұрын

good

@mooney5108 5 жыл бұрын

Hey guys I need help.. I just bought these new trimmers today and they pulled all of my clients hair. I lubricated them, readjusted them multiple times and they still pulled hair. Anyone else experience that or know what else I could do to fix it?

@IMMANUEL2012 4 жыл бұрын

Mooney same problem here bro. You find any helpful info on how to fix that? Slim line pros are my go to. I was hoping these bad boys work as good or better but they keep pulling.

@properimage6476 4 жыл бұрын

Mine pull how do I fix them

@haaa.aguilar9016 4 жыл бұрын

Change the blade

@haaa.aguilar9016 4 жыл бұрын

If u can find blade not babyliss brand better

@-ZED1 5 жыл бұрын

What happened with the magic clip/andis master blade mod? Is that still a go? Lol

@kikado3 5 жыл бұрын

Lol. I still have the blade but once i took it off and installed the ceramic blade they were killer. Just didnt accept the nano guards. Ill try to do the video either way. Slightly on the chooping block. Hopeully im free and bored one day

@thestarsbarber0813 4 жыл бұрын

Bro I’m having a problem setting mines

@rvnc4985 4 жыл бұрын

TheStarsBarber same- asking other barber friends and no one else has them. This sucks. So pumped to use them but can’t set it to cut right...

@Asanchez78 4 жыл бұрын

They come with a tool that you slide the blade into so you can zero gap them a lot easier then this video

@josesalazar3835 4 жыл бұрын

Antonio Sanchez I used the tool but it pushes the bottom blade way too high.

@Asanchez78 4 жыл бұрын

Jose Salazar when the top is over lapping just take your thumb and tap it down till it’s even with the blade a bout 2-3 hair strains

@jarlissonmendes7745 3 жыл бұрын

A skeleton red é melhor será?

@adduneek 5 жыл бұрын

My main man Ricardo where you been? man you look like you to slim down! Lol

@kikado3 5 жыл бұрын

Lol busy with my 3 little monsters. Thanks bro back in effect

@Beatbyawhiteboy 5 жыл бұрын

I thought I was watching someone else. And, he look very clean, too.

@1ayden 4 жыл бұрын

I took apart my entire shit lol. Can’t get em back together. Any help?

@LegendaryTony. 4 жыл бұрын

Damn, hope you figured it out bro...

@nickmarks3714 4 жыл бұрын

6:08 for the adjustment.. these trimmers pull hair so much though, for anyone with big follicles do not use

@cnieves1024 5 жыл бұрын

Where do you buy these?

@kikado3 5 жыл бұрын

Cosmo prof has them in stock

@MistAtsiM 4 жыл бұрын

I got the silver with graphite blade

@kikado3 4 жыл бұрын

I want any deep tooth blade they make. I tried the rose gold and its better than the regular gold.

@MistAtsiM 4 жыл бұрын

Yes this 2.0 graphite blade is amazing

@marcthebarber239 5 жыл бұрын

Someone pleeease tell me where to get these I'm looking everywhere 😩

@brown-hammer9702 5 жыл бұрын

432Marc same bruh can’t find them anywhere

@axelrodriguezroman4053 4 жыл бұрын

432Marc universal barber app

@diesel4181 4 жыл бұрын

CosmoProf

@jaimecueto6414 4 жыл бұрын

Atlantabarabers.com

@Asanchez78 4 жыл бұрын

614 barber supply

@ghettygreen9180 3 жыл бұрын

TheY don’t hit like my andis t outliners I’m sorry it’s cute tho

@MrFRESKOTV 4 жыл бұрын

How would this compare to the slimline pro li?

@kikado3 4 жыл бұрын

Smashes the slimline pro

@charlesdouglas9199 4 жыл бұрын

Mys getting hotter on the blades why is that?

@kikado3 4 жыл бұрын

Prob needs to be sprayed with cool care

@charlesdouglas9199 4 жыл бұрын

@@kikado3 i did

@kikado3 4 жыл бұрын

Wow if it gets hot fast theres something wrong with the machine.

@charlesdouglas9199 4 жыл бұрын

@@kikado3 noooooo i didnt want to hear that but i think maybe

@BilalBilal-qk3zx 4 жыл бұрын

Do you have a telegram

@xlnu 4 жыл бұрын

My screws are fukn glued on they do not move at all and now the screws are fukd up man, they need a better screw driver for this

@RawMeat1226 4 жыл бұрын

Mine are glued wtf

@ricog502 4 жыл бұрын

My shits were hitting till I Zero gapped now idk wtf is going on but they snag like a mf

@kikado3 4 жыл бұрын

Thats weird. Im not having that issue. Maybe the blades a little crooked???

@CASTRO45ACP 3 жыл бұрын

To be honest I don't believe babyliss makes any of their products, they just get a Chinese company to make whatever with their name on it, way too many copies of this clipper from china that are actually good too, that being said these are the best ones and still a very good trimmer, overpriced but very good.

@marloncoley1810 Жыл бұрын

A lot of companies do the same thing