Explained extremely clearly and to the point - thank you, sir!

Man I've learned so much from you Jay, I think Ima call you uncle Jay.

Very helpful quick and easy.

Thx for sharing with us! Just adjusted and tested on inside of forearm… trust me go there first before neck. Skin on INSIDE of forearm is pretty sensitive and will pinch/scar like neckline Thx again…. I had to go looking for the accompanying hex…. Thought I lost it☺️

This was very helpful 💪🏽

SO helpful!, QQ- after I retighten the screws the trimmer doesn't turn on (blades move briefly), if I loosen them they work (obvs cant use the machine like this) Any ideas what I may have done wrong?

finally got a pair!!!

Thanks for this tutorial

Thank you bro, appreciate your tutorial.

Thanks for the help!! 🙏🏽

Thank uuu! I got mine for Christmas it came in a duel set but I have not use my trimmers because when I try to the trimmers scratched my first male client 😢 so they have been sitting in my station ever since. But Not anymore 🙃

I ordered the same jawns, should be gettin em in a couple weeks. I’m just tryna be a lil proactive by educating myself on em before hand. Your video got me exactly where I need to be. Thanks for sharing! 👍🏿

i got a new gold fx trimmer with the stock gold fx707z blade, it looked to already be zerogapped from factory, i noticed when i use it on really small neck hairs, it seeems to kinda grab/pull, but only when the hair is super tiny, kinda like when its trimmed the day before and just grows a tiny bit. it seems to cut other hairs fine. is this normal? i assume when the hair is super small its kinda coarse, which is why this blade cant cut it properly hence the grabbing/pulling? unless im mistaken. thx

Does anyone have a link to purchase a new adjuster tool? I cannot find it anywhere!!!😫

💯 on the money. Perfect video

@eazybladesshavingproducts Was this edger design for the black blade to shift side to side on its own when it’s on??

Just got mine yesterday and at first I thought mines was missing the yellow screwdriver but I viewed the most recent Amazon reviews and they don’t mention anything about it being included; however, they appear to already be zero gapped from the factory.

Mine came with a little gap setting tool as well as the screw driver and the hex key

Thx. I decided to get this over bevel

Thanks player just got me a pair today!

The cutting blade moves slides side to side if I move it without losing the screws, is that normal?

What would you advise if this one snags the hair? /:? I’ve been lubricating mine and just praying it doesn’t snag anymore

Very helpful thanks

Hello wondering if you could help me…I bought my skeleton gold fx and my blades are pulling hair not sharp cuts like it use too. Do you have any suggestions?

Mine looks good. Maybe my eyes are bad. Will try them soon but it looks good out the box.

Thanks for the solid tutorial. Is zero gap bad for kids necks?

Do you what size the little Allen key is? I lost the one that came in with my trimmers and am trying to find a replacement lol

Having the come blade meet exactly where the comb blade is is not a zero gap, it's a vibrating knife

I got this clipper, but it came with the black diamond carbon deep tooth blade. Everyone I see has the gold FX blade, should I get the gold fx blade?

Hi. I bought a new zero gapped trimmer but it’s not cutting as cleanly as I would like. I try to shape up my beard myself but it never looks good enough. I’ve been having this issue for years with trimmers I zero gapped myself such as the Andis Slimline Pro Li and I’m not sure what I’m doing wrong. Can you help?

Off topic..Can I use Andis cool care 5 in 1 clipper spray on my babybliss trimmers or do I have to use baby Bliss clipper spray??

Where do I get that screw driver the yellow one I didn’t get one in the case only the smaller Philip head

you said at 5:04 to make sure the gold one is not higher than the black one...isn't it the other way around? Thanks!

I took apart my trimmer because one of the screws came stripped when I was trying to zero gap it. Any idea how to put it back on? I’m so irritated right now.

What’s up brother. Now my black blade is moving side to side. Just like yours was in the videos. I have the screws all the way tightened. They’re still moving. Fresh out the box literally.

I just bought a brand new one but it scratches and has a weird loud sound when it works although the second trimmer bought previously is great without that weird sound and never scratched !?!?

What’s the name of that type of screwdriver? I’ve been trying to adjust my blades but I don’t have the tool to loose those small screws

is this one okay to use to clean whole beard? not to just line/shape the beard, but to remove whole beard? is it okay to get for this purpose? or will it scratch my neck or cheeks?

aye what should i do if one of the lil screws is worn?

Does zero gapping cause it to cut skin if you push too hard?

How do I reverse this?

Sup bro where can I purchase the teeth’s or blades please ?

Where do I get the small Hex screw driver from ?

Why didn't you just use the gapping tool it came with? Does it not work

yo bro i got my purple babyliss influnecer trimmer and for sum reason when i zero gap its fine but when i turn the trimmer on one side of the cutting blade goes higher then the other . It hangs off of the blade

Can you share where you found the tool to unscrew nails? My trimmer did not come with it

Is this necessary for regular home use?

How does on sharpen? My new one doesn’t seem to be sharp

Is this better than the wahl cordless detailer.

For some reason the screws on mine wont come loose

1:43

I'm new to this I got baby blisspro but Mines got this stick lever, on the side how do I zero gap this one I got

why will turn on the red light

My barber has that same clipper but let me tell ya I got scarred a lot of line cuts but overall my cut was nice just didn’t like the cut scars on me 🤷🏽‍♂️

I'm reading all these comments and for some reason ppl either not understanding what's being asked. Where can I find that tool independently? I don't need to know that it comes with the trimmers, if one came with mine I wouldn't be asking said question🤦🏾‍♂️

I just got these trimmers, that tool with the yellow handle wasn't in my kit. I can't find it anywhere in stores 🤦🏾‍♂️

Guys what's the main difference between this and the Lo pro FX ?

Hey I got some yet they were fake.. where do I get the real ones from? Where u get urs at? Please help

my babyliss pro fx isn't cutting any more hairs not sure what wrong with it really annoying

Mine took a light fall the other day. Landed on My bathroom mat and hasn't sounded, nor cut the same since. I've since applied this adjustment, regaining some trimming ability, but the motor is still too noisy. Not that calm hum, right out of the box. Seems these clippers aren't very resilient, or durable. Even My Andis has survived far, far worse.

I don’t get why Babyliss won’t already deliver the products like it should be. On line. Am I missing something or is there another reason?

🤝

What if it ddnt come with screws

You gone straight shred somebody with the blades that close..

bro idk what i did with my hex key😫

What if mine are pulling hair?

Is this good to do bald heads?

Mine is pulling hairs all of a sudden, anyone experienced the same problem?

Where can I get that tool?

I think I stripped one of the screws :/ I can’t take it off and my screw driver just rotates around it. I just got them too

i cant seem to unscrew them

When i perfectly line my own up is scratches my clients.

I zero gapped it but now my guards rattle when I close lever,

Do they hit?

Every time i try to zero gap they’re either to sharp so they bite/scratch or they’re not sharp enough. All the hair cutting videos I watch the barbers trimmers line up so sharp without cutting but yet I can’t figure it out. Drives me nuts

See this is my problem with all these liners. If im paying for these,why do i gotta loosing screws to sharp it?!?! The manufacturing company should do it before sale. Fuck outta here

Dude looks and talk like Klay Thompson

I did mine but it cuts my skin

I zero gapped mines too sharp it kept cutting and burning my skin up.

anyone interested in a replacement blade for this trimmer , Black Graphite Deep Tooth 2.0mm ,part no 7072U Price £25 GB

I can’t remove those fucking screws and I’m using the right Allen god damn these it’s just stripping the metal away

Bro they need a better screw this screw doesn’t move shit and now it’s fucked up and I can’t unscrew anything

Mine too sharp man wtf goin on

He moved it without saying why disliked

Ba-bah-liss. Not baby-liss lol. Good tutorial though.

Over engineered as well as poor spring design . Out the box they hit but the blades break easy and it's so expensive