Back to work on the Bugatti 👏🏼

Рет қаралды 119,911

6 ай бұрын

We're jumping back on the Bugatti today to (finally...wait who said that?) get the hood latched down with leather hood straps. I believe we ordered the hood straps from Moss Motors which was a lot cheaper than ordering them from Porsche 😱
IF YOU ENJOYED WATCHING:
subscribe, leave a comment and hit the like button
/ badchad
CHECK OUT OUR MERCHANDISE HERE:
www.hiltzautoco.com
FOLLOW US ON SOCIAL MEDIA:
/ badchadcustoms
/ badchadcustoms
/ macintyrejn
/ ___jolene
MAILING ADDRESS:
Hiltz Auto Co.
RR3
Canning, NS
B0P 1H0
#badchad #bugatti #carbuilding #basictools #carbuilder #supercar #hotrod #hotrods #cars #car #classiccar #classiccars #badchadcustoms #automobilerepairshops #engines #mechanics #automotive #automotivecarchannel #carchannel #automotiveengineering #engineering #customcar #customcars

Пікірлер: 347

@leblanckerry4826 6 ай бұрын

I would have made a template to lay out the top holes and attached the top before laying out the bottom holes so I could stretch the straps tighter. You put them on loose and your rubber bump stops won’t cure that rattle unless you want a huge gap in the hood. I know you’ll figure it out but you sure had long enough to think about it and now you just made more work for yourself. JS 🤷🏻‍♂️ Hey Fina❣️ BTW nylocks are made to be tightened one time so don’t wrench them down until you’re ready for final assembly

@kbschulze 6 ай бұрын

Please build one and show us all, hahaha

@mura0 6 ай бұрын

notice that too. That hood is gonna bounce when driving.

@johnbell3324 6 ай бұрын

Them drill bits are bad . I've thrown away 15 so far.

@thomaspeariso5622 6 ай бұрын

You should put thread inserts in for the mounting holes for the straps.

@mikethompson9015 6 ай бұрын

Hers how you don’t screw up certain tasks such as drilling holes in the hoid of your car. first slow down and run all the advisors off. second slow down , third , get your self sone decent drill bits , the cheap ones wouldn’t drill hot butter , o , and slow down

@dougal445 6 ай бұрын

Should use sraps with a pad under the buckle to prevent scratching. And the've been set on the 1st hole without tension... that bonnets gonna rattle!

@davidmorrison3697 6 ай бұрын

He could add a pad under the straps to protect the painted car😮😮😮

@michaelbristol6467 6 ай бұрын

It's a show car it won't be driven much. 😉✌

@tinkerne-round4079 6 ай бұрын

Once the rubber seals are installed under the hood it won't rattle. I guarantee Chad knows what's going on there.

@garycamara9955 6 ай бұрын

Its not a bonnet, a bonnet is a womans hat. This is a hood.

@michaelbristol6467 6 ай бұрын

@@garycamara9955 Europeans say bonnet. Trunk lid is a boot and fenders are wings. 🤷‍♂️😉✌

@tompekarna 6 ай бұрын

if you run short of dull drill bits, let me know, i can supply additional ones at a nominal fee, i even have some bent ones which will deliver an egg shaped hole.

@tonivitanovic 6 ай бұрын

The return to this project is temporary and is not a phase in which Chad swims well. Nathan would fit in better and would certainly be more precise and premeditated

@jherd9064 6 ай бұрын

I love this car! Glad to see you working on the old girl. I hope I live long enough to see it finished. LOL

@howardt1317 6 ай бұрын

I have 2037 in the pool for completion date 😂😂I

@jimwhittemore1610 6 ай бұрын

Gonna make a bunch of people happy to see some work on the Bugatti

@abdulhaqebrahim5693 6 ай бұрын

Doubt this car will ever get complete. All my comments regarding this car has been going on deaf ears. We will see another one hour of content again, probably in a few months. Might even be another drilling lesson lol.

@warrenaffleck5960 6 ай бұрын

not sure what drill bit size to use-drill a hole in a pc. of wood and test fit bolt-screw to see if it fits

@josephcardelle5844 6 ай бұрын

You should always start drilling the holes with a center bit

@dumpsterd7148 6 ай бұрын

installing the belt hood latches CHAD is where you should break out this invention they call a tape measure instead of the eagle eye it would be very noticlable if they were off from one side to the other i could tell jolene was a little nervous herself just saying

@artstech 6 ай бұрын

Measure and make a template for the buckles. Don't eyeball them because if one is out by just a small amount it will stick out like a sore thumb.

@kbschulze 6 ай бұрын

Hahahaha!

@kevinm1903 6 ай бұрын

i think the belt buckle pin needs to face down not up

@littlered1880 6 ай бұрын

Hey Chad, hi Jolene,Nate and Doug. Chad you should have attached the strap tight on the hood then pull the buckle tight then mark the holes on the body, then when you pull the strap to the last hole the hood would be tight, also I know you don’t like the measuring tape but then it would be centred and the top of buckle would be in line with the hood body line. And you need some drill bits and slow the drill down and take your time

@charlielemmons5525 6 ай бұрын

A small template would have made it easier getting the holes the same on both sides. Hopefully Chad won't tighten them down yet since those are lock nuts. Im sure Jolene likes when more work gets done on her Bugatti.

@AndyH-13 6 ай бұрын

You can see Chad slows down and is a lot more caring when working on Jolene’s Bugatti. Beautiful car and especially being made of metal.

@leftyoverton4347 6 ай бұрын

Fast forward option on KZfaq is a wonderful thing! 👍

@rickclark4112 6 ай бұрын

They don't listen.... they could add alot more content to each video. I've suggested it several times.... half a video is off grinding or stuff like that... we know Chad can grind cut and weld metal... it's just bad production plainly....Sorry guys....TRUTH

@thomassciurba5323 6 ай бұрын

Treat your drill to some decent new drill bits and it will not be your enemy.

@williamendictor1488 6 ай бұрын

What ever happened to Jolene's Bugatti hauler?

@Aaronlewis8846 6 ай бұрын

The Bugatti is looking so sweet. My only concern on the belt latches that you may have not mounted them where they will tighten up tight enough for the hood to not rattle. And i hope the metal on the buckles dont rust. But other than that they look awesome on the car. Cant wait till this car gets done. Gonna be an awesome car.

@DavinaBaldwin-wp1ff 6 ай бұрын

Good to see you working on the Bugatti, time it was finished!!

@jacquelinechellis4036 6 ай бұрын

I love this car Chad. I could never do something that cool. Its so hard to build an exotic car from scratch for the love of your life. Well done!!!!!!! I gotta say redo the steering column. A colapsable shaft tilt for safety and driver comfort. Please sometimes ya gotta bite the bullet. Maybe i am wrong but its too high and its a solid shaft i believe. Dangerous. Sorry to complain but its critical to the build. What a beauty you are building for her. Thanks for all the excellant builds i learn alot from you. Peace be with you and Joline

@snoopu2601 6 ай бұрын

That's a trip Chad is drilling holes, I was using my black and Decker Drill I bought year's ago. Drilled many many holes with the B.D. Drilling out holes on 18gage metal Plate. I have 16 holes to drill out on the plates, so I can bolt on wheels to a stand I'm making to put my belt sander on. I get to the last two holes to drill. I burnt out my drill it started slowing down and then started smoking from the drill gun!! Got out my cordless drill to drill out the hole I was working on. (until I buy a corded Drill.) Cordless not going to cut it for metal epeacally if I'm drilling long periods of time! I have 2 hardwhear store's to choose from Home Depot or Harbor freight? Drill press or hand drill? After I see what my options are then I'll make my decisions

@rickchr60 6 ай бұрын

Just me but I would have used a tape measure when marking the holes. That way they’re all the same measurement from the edge of the hood.

@phillipragsdale3382 6 ай бұрын

I really look forward to seeing the color that you put on the car. It’s such a beautiful body style and you’ve done a wonderful job on it.

@seang7012 6 ай бұрын

Love that you guys are back on this one...unreal execution to date!

@tonymosca6591 6 ай бұрын

Hopefully Chad has Jolene”s car ready for this summer!

@redson4928 6 ай бұрын

At least this year

@charleskelley4586 6 ай бұрын

@@redson4928or this decade lol

@purplerain55 6 ай бұрын

Its a 15 year build😆😆😆😆😆😆@@redson4928

@DonAnderson-rh1hj 6 ай бұрын

Really looking forward to seeing this project Done ✅ 👏👏👏👏

@jimmyjam813 6 ай бұрын

Chad never gets nervous working on cars until it comes to this Car. He loves Jolene so much he wants the car to be perfect for her. He second guesses every move on this car now. Hang in there Chad take a deep breath it's just a car and everything will be fine !

@robertgendernalik4360 6 ай бұрын

SO we bounce projects again...

@timriffe1423 6 ай бұрын

Hey Chad Jolene on those straps on the Bugatti I would attack those if it's that tight I would tap them and if you don't it's still going to look good but before you put them on there I would put some kind of like little gasket right up underneath that belt so that way when you put them on there it doesn't rub the paint you have an always have a nice little gasket right up underneath of it it's just a thought

@johnmaclachlan6818 6 ай бұрын

I knew Chad wouldn't bring the Ford to the paint room.

@brucewitcpalek5120 6 ай бұрын

Chill out dude, why would you bring it to the paint room before it’s done and ready to paint🤔🤔. They’re always has to be a hater on every video no matter what Chad does !!!

@roadwarrior4813 6 ай бұрын

If you don't like how chad does things you don't need to watch his channel...

@Frontireadventures 6 ай бұрын

Lol..😂😂

@phillipwilliamson-oq7ts 6 ай бұрын

Get some new sharp drill bits or sharpen your old ones. Lol😊 might make drilling holes easier?

@johnmaclachlan6818 6 ай бұрын

Just saying@@roadwarrior4813

@leblanckerry4826 6 ай бұрын

Wow Chad slow down 😂 you only need to have it finished for when the new building is ready 😂 Yes I remember when it was the only thing keeping you from painting it. I remember when you ordered them and got them way cheaper. It was a while ago for sure. Hey Jolene I’m just busting balls, I really enjoy watching. I love you guys especially Fina❣️ Having said all that, this is the car I want to see finished.

@peterlitwinczuk5403 6 ай бұрын

Should have used a template....

@thomasmagray 6 ай бұрын

Root Beer and Cream Soda would be a good color for the shoebox

@michaelmorse1460 6 ай бұрын

I was thinking Porsche pearl white

@bigtxsdude 6 ай бұрын

with the light color of the interior and those straps how about a burgundy wine

@tomday7309 6 ай бұрын

I'm glad to see the Bugatti again. I see a bunch of other folks are too. Chad eyeballs a lot of things when he builds. I imagine he does that to match what his brain is seeing conceptually. I do a lot of that myself and usually have too many projects going on at the same time too. Keep the work coming and thanks for doing these videos!

@davidsolloway9349 6 ай бұрын

Nice to see you back on the Bugatti !

@generock3543 6 ай бұрын

Chad why are you so tense n hiper

@textech4056 6 ай бұрын

The Bugatti is the best example of your talents. It's truly a work of art and hard work at that.

@patrickscanlon1631 6 ай бұрын

Wow bugatti back on the bugatti build

@skipcantor868 6 ай бұрын

When will you get back to work on the Bugatti Hauler? I was really enjoying that build. Also, I never saw the completed bike hauler with the bike in the back. How about a photo of that. Thanks and keep up the awesome work. You, Jolene, Nate and Doug are such a great team. Keep on keeping on... 👍 Chad does not like tape measures. LOL Why not measure from the edge of the hood to the top mark for the screw, to make sure they are all the same? It takes a real man to admit mistakes, and when you said I should have done this or done that, it says so much about your character. You are truly a gem. And finally the straps look amazing. Jolene, in the future make sure Chad doesn't unlatch them unless his hands are clean. LOL

@danhanson6577 6 ай бұрын

YES so glad your back to work on the Bugatti. YES!!!!!

@abdulhaqebrahim5693 6 ай бұрын

One hour of drilling lesson... Thanks Chad. Forward button...Thanks youtube. Do these cars ever get completed. Or is this like just content creation... Bit by Bit.

@gmc.joesousa4360 6 ай бұрын

Bugatti Action Wednesday !!!!!!!!!!!!!!!!!!

@michaelfowler8289 6 ай бұрын

Can't wait to see the finished product in color the Bugatti is definitely one of the most important finishes I would like to see that is😮 my opinion to each their own Ment in 😊good taste and flavor LOL

@biglakehotrods381 6 ай бұрын

I’d be looking into some sort of an acoustic and heat/cool barrier like a spray on lizard skin for the interior panels, before the upholstery goes in. Keeps that tinning sound down. Pretty amazing creation. Can’t wait to see it going down the road!

@krekautofunilaria8730 6 ай бұрын

Top dás galáxia ótimo trabalho 😮😮

@charleskelley4586 6 ай бұрын

Nice to see you working on the Bugatti again

@Combat.Wombat.official 6 ай бұрын

Will you be putting spring mounts under the hood so the belts can be pulled tight'ish to stop rattles?

@davidgreen3004 6 ай бұрын

Nice to see the Bugatti again keep up the great work guys, be happy to see when you paint it.

@adambk420 6 ай бұрын

Great job as always Chad love your self motivated techniques don’t mind all the haters that barely get their boots on. Thanks for the vids

@davidmcgee1246 6 ай бұрын

I appreciate that you obtain input from your Queen, ensuring that she (and you) together build what might become one of your greatest cars.

@murrayhelmer8941 6 ай бұрын

Somebody buy Chad a box of drill bits lol

@charlessmyth 5 ай бұрын

It's been a while since I looked in. Contrary to what I thought was to be the arrangement, it's good to see that an arrangement have been made with regard to the bonnet of the Bugatti, so that the body doesn't have to be lifted off the chassis, to get at the engine :-)

@rooster5726 6 ай бұрын

HUMP DAY 🐓 in the 🏠 Bugatti Party Today

@brucewitcpalek5120 6 ай бұрын

Very exciting at bad Chad’ custom car building shop !!

@noads1035 6 ай бұрын

Put some sort of ‘ornament’ on the top of the radiator and let it have a couple of extensions coming back over the leading edge of the hood. (On each side of the center rib) That will guarantee the hood can’t lift until you want it to. To take the hood off, unbuckle it, lift the rear of it and slide it out.

@mattcasoni 6 ай бұрын

Little bit of cutting oil when drilling metal helps tremendously. I also use a spring punch but I could see not using that on a hood

@oldgrizz8720 6 ай бұрын

Can't wait to see Jolene running to the coffee shop in her Bugatti

@billallen7716 6 ай бұрын

Glad you're working on the Bugatti

@WaxMeister 5 ай бұрын

Lookin' forward to seeing the Fauxgatti finished - I'll check in again in 6 months!

@MiguelLopez-uy2uu 6 ай бұрын

Chad, the steering wheel looks a bit high on the BUGATTI.

@KING4aday46 6 ай бұрын

Bugatti, looking good. Can't wait to see it completed. Beautiful work of art.

@dral9657 6 ай бұрын

Damn , that is one of the most beautiful body lines in the auto industry I have ever seen ! Nice touch editing with showing the cell pics of the leather latches during filming ,nice touch Jolene .

@cannabisticannabisticino2718 6 ай бұрын

Now the paint shop seems brighter, it really needed a nice refresh Nice straps, they fit well 😎👍

@rogerpatton-zr7qd 6 ай бұрын

That car is a work of art. Impressed

@The_Kman 6 ай бұрын

Nice taking a break from the Ford once in a while.👍👍

@morgangrenander5941 6 ай бұрын

You have a big heart Chad It's real Love💯❤️ wish you both all the best

@Jarratt. 6 ай бұрын

Just a little trick I learned when drilling holes and I don’t want the chips getting everywhere you don’t want, I use a neodymium magnet underneath right next to where I am drilling, just a thought.

@janmorse8777 6 ай бұрын

Yay! Go for it Chad 👁 🐅 👌

@brianstegemoller19 6 ай бұрын

I knew soon as you saw the Bugatti you be back to work on it. Looking nice I think I would have used rivets on the straps but you do what ya like!

@janmorse8777 6 ай бұрын

Chad's gotta take them off too paint the car 👌

@dral9657 6 ай бұрын

Polished Stainless steel rivets might be a nice alternative to using screws ?

@Hanlonsgarage 6 ай бұрын

The BADGATTI is now the official name...

@cathyandgreg4239 6 ай бұрын

The belt straps look great.

@williamwatkins1264 6 ай бұрын

Hope none of the metal chips fall into the carbs or in the electric system. Hard to tell.

@allcarzautoparts 6 ай бұрын

would love to see a wood grain steering wheel ,or polished ivory with chrome spokes

@Mgreen0104 6 ай бұрын

How can anyone criticize this build? He has built this beautiful show piece HIS way this far. I trust that this will be the best one yet! If the customer wants it uniform do so. If the customer wants it done free hand do so! It test Your Craftsmanship to build something; For someone else in there eyes! This Motherfunker is Hard right there! Yes Lawd!

@ate-updesigns9186 6 ай бұрын

Nice to see the Bugatti again..like the hood hold straps...lots of stuff goin in the shop today...nice episode..cya tomorrow

@mura0 6 ай бұрын

Love the camera angles from Jolene.

@franzlo1 6 ай бұрын

It's Jolene's wedding car,of course they would want It done in a timely fashion but everything takes time.........always happy to see work being done on the Bugatti !🇹🇹🇹🇹🇹🇹🇹🇹🇹🇹

@robertstuehrenberg5719 6 ай бұрын

Such a great looking ride. Lucky lady. What exactly covers the ribs? Chrome or something?

@brucegerken1063 6 ай бұрын

Great video thank you very well done.

@danbaron3054 6 ай бұрын

I can't wait to see the Bug finished and painted.

@gearsandbeers9100 6 ай бұрын

This Bugatti will create triple takes. 1930's and 40's cars had a vibe.

@mikefisher8450 6 ай бұрын

Hell yeah the Bugatti! Sweet

@davidhuber2679 6 ай бұрын

Nice to see Jolene,s car again.

@cherylfarrell1638 4 ай бұрын

That’s really looking nice I watched you build that car and I still can’t believe it. I’m gonna have to get some counseling.

@andyoie5447 6 ай бұрын

Looks like someone already suggested it so I will also add the suggestion, install flush mount rivet/blind nuts for for the strap screws, take your time to install properly and they make life easier in the future.

@rogerpritchard Ай бұрын

Still need proper hinges. Top gear presenter Richard hammond put a nice leather strap on his jaguar XK120 bonnet. Great work Chad.

@user-to4nq9ts6v 6 ай бұрын

I really like the belts.

@kevinarlint2023 6 ай бұрын

waterproof the straps etc. knowing straps will stretch level a hole for longer use ( after you can add 1 hole just to do the job , may look off or order as needed new straps for car shows or just remove bag and save this set to place at shows only ( glad ya drilled before painting

@mikemulvihill6895 6 ай бұрын

God to see you back on this

@Young937phoenix 6 ай бұрын

If you use a little zoom oil when drilling or even dump the tip of the drill bit in old used motor oil you will help keep them from dulling the blade on them. I’m sure you know.

@edwardjones2748 6 ай бұрын

This will be quite the eye catcher when finished. SHOW STOPPER

@user-qs2bt7fl7g 6 ай бұрын

Those straps add a lot to the Bugatti

@morristhegreat1 6 ай бұрын

Love Fina’s face.

@davidsimpkin1213 6 ай бұрын

Hood buckles look good… nice to see you back on the Bugatti !!

@DansAm76 5 ай бұрын

I used a child's belt from wallmart as it had metal eyelets and the belt was like 5.00 😂 got two and it looked great on my rally inspired 66 bug. I get lots of compliments on the belts. Got the idea from a Porsche race car I saw at the Revs Institute museum in Florida.

@ezranobles1528 6 ай бұрын

Looking good Chad 🇹🇩

@donlandenberg8126 6 ай бұрын

Thanks for sharing with us today.

@barriecollins6838 6 ай бұрын

Chad and jolene it's nice to see the work is still moving forward on the bugatti and every little that is done brings it closer to being completed. Keep up the great work the both of you 👏 👍