Been around a long time. Never seen a Man so eager to solve a problem, so all people can enjoy their DREAMS at your level. I am 87 years old old body man. I am willing to try my best to try my hand at my wants and desires. THANKS CHAD. MEL AND GINGER.

It does look better. The VISION is everything!

Love watching your KZfaq videos Chad and Jolene.

Can’t wait for tomorrow!😎

These “how to” segments are the best especially the way Chad does the ,low cost and effective.

I love your process and how you sort of figure things out as you go. I'm ADHD and I find myself explaining to people why I think out loud so much while I'm working on something. It seems to be the only way I can focus on what I'm trying to figure out without thinking about ten other things at the same time! I tend to overthink myself into a state of motivational paralysis. Nothing gets done! I'm certainly not implying you have some sort of mental condition, I'm just saying it's inspiring to see that someone who's process is similar to mine can be so accomplished at what they do. Thank you for the video.

Watching with my son,he enjoys how you educate without over complicating it. Thanks for hightening is interest.

Pepsi glass ?

So love watching your creative mind at work building cars

The rear window from the side looks splendid. My brother works in a glass shop. He turned me on to non-scratch Lexan. I've used it in construction and on race cars. Way better than Plexi. And... you can bend it in a sheet metal brake.

Love that Bad Brad does not settle for good enough!

Whoop Whoop! Great job Chaddy.

you should open a museum and show off all your art to the world

When it comes to creativity there are no hard-and-fast rules only general theories and principles. Even those are meant to the work with and applied. This is what you do so well. I could say you think outside the box but that really wouldn't be quite as descriptive and accurate of a description of your talent and just simply going after it!

i 1st saw you 2 1/2 yrs ago after they cut out 1/3 of my guts due to cancer. in recovery i watched you on cable tv everyday. i forgot about you til i saw japhands the other night. so i subscribed. love the window molding. great idea.... lol from Huckabay, Tx.

I can't believe how good it looks with the bits of cardboard taped to the back window. Great visual. Thanks for a great video guys.

Good call on that back window. Extending it and keeping parallel lines made it look soo much better.

Enjoyable video. Nice change on the back window.

Never heard of clear vinyl wrap, but it sounds perfect for this and other disiplines. My buddies who build airplanes (homebuilts) will love this. Even the kitbuilders who receive preformed windscreens could wrap and protect these parts. Over time, plexiglass grazes and fades and considerable effort is spent polishing so one can see where he/she is going. Excellent video!

More window work today. Chad is trying some ideas and working with plexiglass. More to learn. Thanks Chad and Jolene for the great lessons.

Chad keep up the positive attitude and hard work ethic. I hope all the kids are watching.

Great solution! The back window does indeed look 100% better. That will simplify windshield making until “Scotty’s” formula for transparent aluminum becomes available. Good one Chad! Can’t wait to see the finished product.

Your energy is palatable! Love it when you can witness inspiration happening. Always enjoy the ride you take us on! Keep up the great work too!

Very cool watching you work wiith acrylic. Great video.

I know I’m repeating myself, but over and over again Chad shows how fantastic of an artist he truly is!

Hey Chad, I have to say I love your work and creativity! As a car guy I seriously enjoy watching your show! Thank you for all you do for all of us car enthusiasts and even more so for giving us creative ideas on how to make and build things! You’re not afraid to try anything and I have a lot of respect for that kind of attitude. Here’s to you and Jolene! Keep up the great work!

You are amazing and gifted! Love your work!

Yes that roof Flows beautifuly 👏👏👏

ORGANIC builds, love it 😉👍

Great metal work on the front windshield Chad, can't believe how quick you got it done. Love watching you guys work. Thanks

You are Amazing your creations are all you love it 😁😁😁😁😁💟

I see the happiness you have found...knowing you can now make any windows you want.

Love the intensity and passion you have for what you do. Great content, keep it up.

I must tell you. Doing what you do has always been a passion of mine.now that i have the time im going to do it. I cant stop watching you and feel I've learned so much. The windshield video is at the top

I use a very similar method, made a template and found a place where they use regular glass to make the window, then I use vinyl wrap on the inside for safety. The price on the glass was under the price of the vinyl, and works like a charm. Chad, follow your flow, it's great !!

Love watching and learning. Thanks for the hard work you two

I really like the idea of clear vinyl wrap to protect the acrylic windshield. Thanks for sharing your ideas and work. Genius at play!

I am happy to see you do this. All at your place without missing a step! Thanks.

Good class today! Thanks for sharing!

Thank you both for all your hard work.

Chad, sorry this so late just ran across this channel. Your excitement at overcoming your insecurities is addictive. Personal wins in your own mind are the greatest satisfaction I believe exist. I am so much reminded of myself watching you on KZfaq trying out whatever grows in your imagination! I don't build the same type of projects as you but the procedures are the same for finding what you love to do. I have watched you on Discovery but there's too much added drama for my taste on that show. Your wonderful partner knows you so well it's a real pleasure to know how much you respect and appreciate her and her instinctive camera work is exceptional too. I hope you find great success with this medium. Keep at please!

Glad you decided on smoothing out the silhouette of Elvis with the swept back rear window. This is going to be fun viewing wether your idea works or not. Thanks for the good camera work Jolene

That is so amazing I love the complete progress

Wow !! Very interesting watching you form the front windshield and making it work.just excellent fabrication Chad

not only are you good at what you do. You are good at explaining things so ppl can understand them keep it bro

A few years back I worked for a company making windshields for funnycars etc. Roughly to what you are doing here. Except they were made from Polycarbonate. Similar to Plexiglass but shatterproof. Thanks for the good memories

A perfect solution to a common problem when customising cars. Well done!

Thinking outside the box is a great way to move forward hope it works out thanks for sharing

I worked in a plastic factory for 16 years that specialized in thermoforming. That's a good idea. If you could make a mold and thermoform the plastic, then take it to a glass shop, I think that would work better.

Real craftsman, super nice man. Thanks for sharing

Best channel on KZfaq... thanks for all that free knowledge Chad.. can't wait to see how the windows turn out.

Never seen this done. Very interesting. Something new everyday. Love it

Great idea i’m always learning. Thank you for sharing

I love learning how to do stuff. Thanks for the great content.

I like it with the smaller window, looks 100% better, good job

Really nice template building, I like how you made the tape structure to put the paper on, very clever!

I’m excited about the vinyl wrap idea! You weren’t joking about changing chopping. That opens a lot of options for the end problem of chopping! Awesome thinking!! Have a good night.

Go ahead Chad everything is looking AWESOME.

gonna look awesome once glass goes in. nice work chad/jolene

This is awesome, can't wait to see the results. Well done Jolene and Chad.

I take it back. Last vid I said I would leave window in but now that you walked through an explanation of what you like less about the current window I can totally see what you’re saying. I was also lazy yesterday and it must have been impacting my judgement so I went for the easy-peasy. Btw- it was fantabulous to see and talk to you and Jolene yesterday at Princess Auto!

Brilliant.... Thank you very much for this work around.

we been wrapping our lexan windows in drags cars a while now. its works great.

That rear window looks so much better than the original, it flows so well from the roof to the rear deck

I made a comment saying it look OK buy the more you explained what you looking for the more I agree with you. Keep up the great work.

i love how you show your honest approach and how you go about it

Chad, you are an artiste! The way you are creating bucks and then windows is nothing short of genius! I'm more of a "restoration to stock" kind of guy, but this is awesome! LOVE these videos!

Love the new look of the back window. Thought I liked the way it looked, until I saw the change today. Pure genius!!!!!!!! Looking forward to see what tomorrow brings.

So much great information for building stuff...thank you..amazing work and quick

This is a good subject to cover for a lot of applications.

Very cool...your exactly right on that back window..it does flow 100% better..the front metal window looks awesome..kinda reminds me of doc's sunglasses from back to the future...cant wait to see how this works...ingenious idea...thanks for the episode...see ya tomorrow Chad and jolene

I thought the rear window looked fine until I saw the modification you showed. What a visionary 👍

Your excitement for the new idea is infectious. I look forward to watching it become reality.

This was a very interesting process. Thank You.

I’m impressed. We have a mint low mileage 1991 Nissan that our parents bought new. My sister has it as a second car. One day she left it outside in the high rise outside lot. She theorizes that someone dropped something off one of the many balconies in her building. Whatever it was the rear window shattered. She called a number of glass places and they all claim a Nissan Stanza window is not available anymore unless salvaged from a junk car. Apparently none of the Nissans are junk. I have not been able to find a rear glass let alone get it out without breaking it. I may just try your method or similar to fill that void in the rear of the car. Thanks for the great videos. Ps plexiglass is very expensive a places like Ace, Home Depot and Lowes. Ps2 will SAR plexiglass resist windshield wiper scratches.

Hi Jolene & Chad: Enjoy your show daily. Your creativity is amazing. Keep up the great work.

Chad that is amazing. You are so talented. I APPRECIATE you and Jolene. I love your channel.

I am excited to see how to make a windshield! Chad is inventing what he needs at a low cost! Sweet!

You are for sure a idea's man, an artist and know how to solve problem's and let nothing stop you from achieving your end goal ... Like the way that you treat Jolene and work as a team ... luvin your show from Whyalla Australia

Just watched your Premiere today, you're awesome @bad chad!

Really loved this episode. Love the ingenuity.

Worked at a glass co. You shape has to fit in your rubber that locks the windshield in ,I think you are doing a great job I’ve been restoring a 57 Chevy Belair 2dr sedan in the paint booth this week top is Adobe beige bottom Sierra Gold

This is exciting to watch

Some people are born artists... very nice... merry christmas...

Wow awesome job on the front and rear window and how you do it. Thanks Chad and Jolene. Never too old to learn something new.

Wow coming along great chad ! fun to see how you do this, you too Jolene thx for the great vids. God bless !

Great Idea Chad!Neutral Static will be the ticket when laminating. Love the excitement of the day my friends!

Hell of a idea cant wait till it's done

I'm behind you 150% on this succeeding!

You’re right it’s a good thing that you’re proud of yourself opened some minds up there, wow This helps me in my model building in RC fabricating it’s a small thing I do a hobby but it really helped me out thank you for your time!

I love watching the videos and learning! Keep up the great work Chad and Jolene!

👍🏻Awesome idea!!! Got to love it when a plan comes to the mind.

Great video! Very helpful and easy method to create a mold. The more patience you have when forming it, the better it will finally be. Well done!

dude does amazing work! top tier !!

A wonderful idea Chad, I have been thinking about chopping my 39 Buick coupe, even though it basicly has flat glass all the way around, I'm thinking it may be cheaper to do this rather than buying glass for it. And It is something i can do myself. Thank you Chad man. More great filming by Jolene, also thank you for bringing us along.

Looks good. Keep up the good work. Thanks for the show

Here's an example for the young, Chad! Greetings from Argentina!

Love how you are going to redo the back window. Thank you for the step by step instructions on how to make a window

Your windshield buck gave me an idea for a project. Thanks Chad!

I love your ideas on how to build things