No video
Badlands 12k lb winch install | Harbor Freight | 18' Utility Trailer
Рет қаралды 12,842
Күн бұрын
@AntonioClaudioMichael Жыл бұрын
Badlands winch is hard to beat for the price that is for sure
@AntonioClaudioMichael Жыл бұрын
Putting some braces on the back of the winch plate to the front top bar would also help strengthen the winch mount
@AntonioClaudioMichael Жыл бұрын
Welding outside with mig sometimes sucks if it's breezy because the Gas isn't helping the weld much when the wind blowing the gas away but nice work
@doitallgaragetx Жыл бұрын
Not alot of wind that day, I got lucky!
@ElChupa_Cabra 10 ай бұрын
Damn I admire your dedication. When I have to much stuff in the say like you have I just don’t do it. It’s to much of a PIA 😢
@doitallgaragetx 10 ай бұрын
I do that alot, too!
@azrick6458 Жыл бұрын
That's a good winch. I saw a guy pull out a small bulldozer stuck in a muddy road rut he was cutting.
@doitallgaragetx Жыл бұрын
I hope so! I missed a sale by 5 mins (hf closes at 6pm on sundays). They were on sale this past wknd for $299. I paid $379.....🥺
@azrick6458 Жыл бұрын
@@doitallgaragetx yeah it was the same winch. Very impressive.
@doitallgaragetx Жыл бұрын
@azrick6458 glad to hear. I know stuff from harbor freight can be "iffy"...
@AntonioClaudioMichael Жыл бұрын
Been awhile glad the pressure washing business going well brother
@dougmckenzie680 7 ай бұрын
You could have added a 2"x 8" spacer board between the mount plate and trailer deck and longer bolts .
@doitallgaragetx 7 ай бұрын
True. But that would've weakened the mount. I also didn't want it on the deck once I really thought about it.
@sylc6688 Жыл бұрын
Just had my mounting plate welded flat to the trailer and tried to install the fairlead...
@doitallgaragetx Жыл бұрын
Ouch!
@cecilb3216 7 ай бұрын
@@doitallgaragetx Hey I've heard people say some of those winches failed,but the comments section said it's because the Badlands mounting plates are weak. Your take please?
@doitallgaragetx 7 ай бұрын
@cecilb3216 I pulled a 67 Ford pick up truck up on my trailer like it was a go-kart. The winch mount I got from harbor freight wasn't weak at all. Thing had to weigh 25lbs or more. Very thick steel. I'd buy again.
@cecilb3216 7 ай бұрын
@@doitallgaragetx thanks for your response. Go Texans
@richard6897 24 күн бұрын
Slot the holes
@doitallgaragetx 23 күн бұрын
@@richard6897 ?
@richard6897 23 күн бұрын
@@doitallgaragetx I believe it was the first obstacle that you came to where if you set it on a flat surface it wouldn't line up. Slot two holes it will line up and you can slide your bolts through
@doitallgaragetx 23 күн бұрын
@@richard6897 I'd thought about doing that, but didn't want the winch on the trailer bed.
@richard6897 23 күн бұрын
@@doitallgaragetx I would like to put a jib crane on my trailer I used to winch for pulling and lift-loading
@richard6897 23 күн бұрын
@@doitallgaragetx I've sent thousands of pounds up cell phone towers had no slotted holes come in handy but so do washers and lock washers
Project Farm
Рет қаралды 1,3 МЛН
JackFab
Рет қаралды 105 М.
JK Gear and Gadgets
Рет қаралды 119 М.
Drain Plug Garage
Рет қаралды 11 М.
Burgin's Garage
Рет қаралды 12 М.
Wranglerstar
Рет қаралды 336 М.
Topher's Garage
Рет қаралды 16 М.