Baja Electric Skateboard using Hoverboard wheels (HoverSkateBoard)
Рет қаралды 376,027
6 жыл бұрынBOM list
j35.us/Skateboard
j35.us/3DprintedHolders
j35.us/2200mahCells
j35.us/Power2Spare
j35.us/4WD-HubControllers
j35.us/HoverBoardWheel
j35.us/VoltageMeter
j35.us/ShaftCoupler
Electrical Schematic: j35.us/HoverSkateBoardSchematic
********************************************************************************
FAQ:
1) Where can learn more about batteries? j35.us/DIYlithiumBatteryBook
2) Where can I buy Lithium Batteries j35.us/Lithium-July
3) How can I Consult 1on1 with you? j35.us/PhanTime
4) Where Can I buy Solar Panels? Flexible - j35.us/136wFlexSolarPanl
Glass - j35.us/100w-100-solar
DIY - j35.us/DIY-Solar-cells
5) Where can I buy a Battery Management System? kit.com/jehu/battery-manageme...
6) What parts do you use on your Samba? j35.us/eSambaProj
7) What is the best fuse wire? I only use 1/8w resistor legs j35.us/ResistorLegs
8) Why not use Supercapacitors?
A. Batteries work better at this time, caps are rare and expensive devices that are very good at doing things not needed for storage systems typically.
********************************************************************************
Disclosure: When you click on links to various merchants on this Videos and make a purchase, this can result in the earning of a commission. Affiliate programs and affiliations include, eBay Partner Network, and Amazon..
********************************************************************************
My video gear - kit.com/jehu/vlogging-essentials
********************************************************************************
Follow me on Instagram j35.us/insta-jag35
Follow me on Twitter j35.us/twitter-jag35
Follow me on Facebook j35.us/Facebook-JehuGarcia
********************************************************************************
If you would like support my Projects
Buy some of My Merch j35.us/Jehus-MERCH-Store
you can donate: j35.us/helpwithcash
Donate BitCoin - 1PjhLF2vPueywwaoUMetZCLbC6rQiniyj7
or you can become our patron / jehu
********************************************************************************
sponsors
j35.us/jag35-2016
gabvwkey.com
j35.us/indiespot-2016
evwest.com
www.rode.com/products
********************************************************************************
@weareallbeingwatched4602 6 жыл бұрын
Those shaft couplings scare the crap out of me on an engineering level.
@heimdall4148 5 жыл бұрын
whaha i thought the same
@husse843 5 жыл бұрын
Totally insane in the membrain XD
@tristanmcleish3825 5 жыл бұрын
ya no sh*t those trucks are not a straight shaft there curved no way in hell i would put that on my board with out welding it
@frankdelucey2137 3 жыл бұрын
Just tighten it up and drill a hole for a retaining pin(s). Problem solved through engineering. 😀
@tedhancock68 3 жыл бұрын
And they're over $20 each. That exceeds my total budget right there.
@trickyriky1 6 жыл бұрын
"more fun to build it than to buy it" Could not agree more :D
@memyselfandi6422 5 жыл бұрын
Tricky's World I could not disagree more, due to the fact that, what if you came upon an issue and you couldn't resolve it, then you would have a non working product which you would possibly have spent a considerable amount of time and money on, which doesn't even work, where as, if you buy an already built and working product you get to have fun immediately.
@tristanmcleish3825 5 жыл бұрын
@@memyselfandi6422 i disagree with your argument because building it trouble shooting it and fixing it and then having a one of a kind board is much more satisfying than just buying one that is just like hundreds of others and then when it brakes you don't have the knowledge or experience to fix it. or it is to me anyway
@memyselfandi6422 5 жыл бұрын
@@tristanmcleish3825 You can *try* to troubleshoot any issues that may arise, but what if you can't resolve the issue/s no matter how hard you try, the end result being you end up with a non working product and wasted money. You also end up frustrated and think to yourself that, you should have bought a professionally built product which you could now being having fun with. I would prefer to have a professionally built product that looks neat and tidy rather than building my own product which would end up looking ghetto and may not be as sturdy as a professionally built product.
@Petr214 5 жыл бұрын
@@memyselfandi6422 your problem isn't that you can"t resolve it.. it's that you don't even want to think about how to do it. Don't know how? Search, learn, educate yourself and try again. by just going out and buying stuff, you're losing a big part of the experience. People used to be more self reliant.. sigh
@memyselfandi6422 5 жыл бұрын
@@Petr214 I'd still prefer to buy it rather than build it, because while you (for a hypothetical example) are building your ugly looking frankenstein monstrosity, I am off having fun with my pleasure to look at and use, professionally built by experts who know what they're doing, electric skateboard. So who's the dummy in this situation, the guy having fun immediately or the guy who is slaving away still *trying* to build his toy who can't have any fun until his toy is built ? Would you rather purchase a gourmet meal at a restaurant which was prepared and cooked by a professional chef or would you prefer to buy the raw ingredients and *attempt* to make that same meal yourself at home ? If you attempted to make that meal for yourself from raw ingredients, do you think it would taste as good as the meal cooked by the professional chef, of course it wouldn't. *by going out and buying things you're losing a big part of the experience* What I lose in experience I make up for and gain in immediate satisfaction, fun and pleasure and I save heaps of time. *People used to be more self reliant* Yes they did, but that was in an age where people had no choice other than self reliance. If people throughout the ages had a choice (they didn't, but if they did), I am pretty sure convenience would win out over self reliance every time. In this modern day and age only gluttons for punishment would voluntarily choose self reliance over convenience. To take this argument to the extreme, do you or did you : Make your own clothes by sewing material together to make pants and shirts and underwear etc. ? Most likely not because it's more convenient to buy rather than make your own clothes. Build your own house ? (hypothetically speaking, because a lot of people rent rather than buy or even build these days) Cut your own hair ? I could keep going with different examples but I think you understand where I am going with this ?
@Pandadancypant 6 жыл бұрын
This is excellent I've been thinking about building one for while now this is the simplest, straight forward build I've seen.
@saikrishna-mh9hi 6 жыл бұрын
Everytime I watch your project video, I feel something inspirational.
@alecericksen5739 6 жыл бұрын
Wow the Ideas you come up with are so function I never would have thought about hoverboard wheels for a AT board . Bravo.
@ratheonhudson3311 5 жыл бұрын
Excellent work! I also would recommend hub motors for the simplicity but yes they lack torque. What an awesome build and step by step showcase.
@1mc568 6 жыл бұрын
Your Video Editing skills are second to none.
@LMAOrandyBABY 6 жыл бұрын
Yup, very nice guy! I had thought of what would it be like if those hover wheels would do on a skateboard, and thanks to you I don’t have to wonder! Very very awesome!
@viddotcoach 5 жыл бұрын
Love your work man, what you do just makes sense!
@thinerj1 6 жыл бұрын
You make that look easy and u saved a lot of money compared to what one really cost.
@karolbuda 4 жыл бұрын
hi! is there the second part - which you mention at the end - how to speed up these motors?
@hommerdalor6301 2 жыл бұрын
Hello. To increase the speed change the rotor wiring to star instead of triangle.
@RADERFPV 6 жыл бұрын
That build looks sick!
@ElectricVehicleSpace 5 жыл бұрын
This video does not get old. I can watch it again and again. Well done Jehu!!!
@allatsakis5058 3 жыл бұрын
kzfaq.info/get/bejne/j86mg62h0rDLf58.html
@kawasuby 6 жыл бұрын
Good work!!! I was hoping you would do something like this! Looks like I have found my first electric vehicle project!
@jonathanrodriguesdemiranda8583 3 жыл бұрын
Hey guys and jehugarcia , I just wanne say that I was inspired to build this DIY Skateboard and I have done that. It is finnaly finnished, and I have to say It works realy well but just like jehugarcia said the tork is there but the speed is missing. so I will overvoltage the hub moters to a 12s battery, now I'm running them on 36 Volt (42v). I think most people don't have that much money so this is the cheapest build there is(?) for me the final cost where around 260 euro's (303 dollar). It is a lot of fun! Thanks for the great video!
@mojohammad 3 жыл бұрын
Hi, I am also building a Hover Skateboard at the moment. How should I charge it / witch charger should I buy? I will connect 6 hoverboard batteries in parallel (total of 26ah on 36v on a xt 60 plug). Thanks for anybody that can help. Greetings from Germany
@AveRage_Joe 6 жыл бұрын
Nice Build Man!!!👍
@thondupandrugtsang 6 жыл бұрын
That was a brilliant idea. I really like those big wheels.
@brixtongun Жыл бұрын
"I paid 40$ for these motors I need to get more (out of them)" that spoke to my soul bro.
@jandastroy 6 жыл бұрын
If you're concerned about the double sided tape you could 3d print some kind of a rail to epoxy down to the board with a channel for the wires and slots for each battery pack you'd probably be able to strap it down pretty easily. Sweet board!
@allatsakis5058 3 жыл бұрын
kzfaq.info/get/bejne/j86mg62h0rDLf58.html
@BASESKIZL 6 жыл бұрын
I had a boosted board for two weeks. Four months and three surgeries later you post this.
@jehugarcia 6 жыл бұрын
Surgeries? Unrelated hopefully
@supertuner63 5 жыл бұрын
You are such a crafty and smart guy man seriously!
@DJNicke 6 жыл бұрын
Great video, as always Jehu!
@aweome7791 6 жыл бұрын
Keep doing the how to's I love em
@ahaveland 6 жыл бұрын
Want! Definitely increase the voltage - it's current that kills motors more than voltage as long as the insulation holds up.
@johnmck9530 5 жыл бұрын
Increasing voltage increases current. Current and voltage are linked.
@azimalif266 6 жыл бұрын
Pretty good use of those motors.😁
@hellspawnfpv8363 5 жыл бұрын
Perfect for someone just starting!!
@efivip93 5 жыл бұрын
nice build. just one tip, copper and brass workhardens, so using it to connect battery cells, while the board flexes might just break it after a while. cheers.
@Shmade0304 2 жыл бұрын
So many gems 💎 in your playlist .. can’t wait to receive my pcbs 🙌🏽🙌🏽🙌🏽🔋🔋
@MikemfPanik 6 жыл бұрын
Thanks for the summer project
@AJ77MESSI 5 жыл бұрын
Great build man. Did you mange overvolting these hub motors or not yet. I am waiting for it
@burnzy56469 6 жыл бұрын
Awesome video I'm not even into electric skateboards. But all jehu projects are amazing and inspiring can't wate for the second video. 👍
@HowToGuys 6 жыл бұрын
Hey jehu, you can just reconfigure motor windings in delta configuration to get more speed .nice video by the way😉
@ahaveland 6 жыл бұрын
More speed yes, but also less torque. It is possible to make it switchable between delta and star windings, so could use it like a gear shift. It would be a lot of fiddly work!
@powerarmor222 6 жыл бұрын
They are already in delta configuration. Wye configuration is very uncommon in these small Perm magnet motors
@felixthefoxMEXICO 6 жыл бұрын
Peeps Dropping knowledge... D0pe
@leeburrow3671 6 жыл бұрын
Lol. “You just”. I admire people who describe rewinding a motor like that.
@Kallenator1988 6 жыл бұрын
Lee Burrow You dont need to rewind to go from delta to y or vica versa. But granted I am sure it can be an awkward job.
@onrop2004 5 жыл бұрын
Love this build and we are still waiting on the over voltage update. Is there any way I can get a wiring diagram of the 6 wires traveling between the two controllers?
@richnvick9281 2 жыл бұрын
Keywords: simple on the shelf parts on the cheap. Finally somebody that relates thank brutha
@CrAzYDr1veR 6 жыл бұрын
If those battery terminals get loose use wire and crimped terminals instead of solid connection from battery to battery :)
@ricklulu3572 6 жыл бұрын
Nice I've been thinking about using those wheels . I'm glad you did this,, I bet you they weight like s ton.
@jonah5908 5 жыл бұрын
Hey I used to skateboard alot, this looks really cool. But you should make a board with good sliding wheels (zomboehawgs for example) and increase the abrupt acceleration so you can pull off some crazy downhill slides. If you search up downhill longboarding, you'll get what I mean!
@lbabacar8653 6 жыл бұрын
Whath is more better between those vesc Maytech 50a vesc Or HGLRC flipsky fsvesc SK8-50A witch is more better for mountainboard?
@SuperBrainAK 6 жыл бұрын
cant wait for the followup video, that looks pretty simple to build, and not a bad price, you also get to build it how you want, esc motor battery wiring, not the most perfect solution since you are cutting holes in the wood reducing its strength but still good for how cheap it is.
@FilAmGabe 6 жыл бұрын
Great video Jehu! Longtime following
@PortlandDuck007 3 жыл бұрын
thats freaking awesome! i need to make one on my channel! thanks for the inspiration!
@OnnieKoski 3 жыл бұрын
I cannot wait to start my build.
@sixhourdrivemusic 5 жыл бұрын
I appreciate the effort, definitely.
@SamMeechWard Жыл бұрын
Could you recommend which shaft couplers I should use for a project like this?
@kajzwinkels9795 6 жыл бұрын
Quality video, nice job
@nightmareinaction629 6 жыл бұрын
that looks awesome
@SpookyDoopyDoo 5 жыл бұрын
When you drive on a electric skateboard u have to drive with the motors in the back or in the front just wanna know whats better!
@alderinerush 6 жыл бұрын
Great job with this.
@javicarranza7279 6 жыл бұрын
Love your videos
@colorsigma101 6 жыл бұрын
Good Job Jehu ! I guess it's what Backfire did with their ranger X1 !
@toptobottom247 6 жыл бұрын
It seems like the ride is really smooth. I don't need to go 35mph on a board which by the way is extremely scary,
@EnrysonFerraz 6 жыл бұрын
SPOILER ALERT! If you drive on bump roads, the double side tape will not secure the battery.. i tested my self.. i use 3MM Double side tape and didn't work... after a wile driving the battery will fall.
@sandpiper1515 6 жыл бұрын
Enryson Ferraz did you make one of these? if so what do I do with the little black connector with five pins from the hoverboard motor assembly, it's not exactly clear. It looks like he didn't even connect them but I wasn't sure.
@MarvinFuhs 5 жыл бұрын
@@sandpiper1515 you dont need these this is for a other type of motor controller (sensored esc)
@MrCaesartheman 5 жыл бұрын
did you manage to increase the speed of the motor? and what means did you use to accomplish it? thanks
@glenngoodale1709 6 жыл бұрын
Very nice job my friend .... thanks
@jamiewilliams8469 5 жыл бұрын
Would this setup work with the Headway batteries? Maybe the terminals could be connected with spring steel as long as it didn't give too much of a voltage drop.
@atomicsmith 6 жыл бұрын
It looks freeeeeking amazing. acceleration seems pretty good. Even 15-18mph would be workable...
@atomicsmith 6 жыл бұрын
I'd also be interested in the hill climbing...
@HOTSHOT-ls1bc 5 жыл бұрын
Can you please do a video of wiring it in delta!!!!!! I’ve been waiting for what it feels like months
@killianelson 5 жыл бұрын
I'm going the same build. But wondering if those hose clamps worked at all before you used the coupler?
@friddevonfrankenstein Жыл бұрын
Those battery boxes are sweet, gotta build me some of those 👍
@dabocket445 Жыл бұрын
did you ever do part 2? i am really interested in this and can use your videos with my own setup edit: i believe i have enough battery cells, and hub motors. im interested in the speed controllers you used and i want to have the master speed controller wired to the wireless transmitter of my rc car remote for throttle. i also would like to know where you got the motor mounts for the trucks and if you machined them please let make a video covering all of these topics. big edit: i used my brain to look at the description of all the listed parts and its only a matter of time and money and if i decide to make a video ill make sure to credit you
@jihadjong369 6 жыл бұрын
Can't find the last video 4 wheel skatboard bulid
@jmueller87 4 жыл бұрын
What esc are you using and how do you bridge them to one controller? Any help is appreciated!
@roberthill4239 5 жыл бұрын
I got some super cells think they would work ..this looks so cool
@fabrizioblasio2783 5 жыл бұрын
Were can I find the 3d printed STL model for the battery holder?
6 жыл бұрын
Heck! I want to build one now! I saw that I can buy locally hoverboard battery for 45€. Is that a normal price?
@TORTE0001 3 жыл бұрын
HI Jehu, How did you end up increasing the speed of those motors?
@GDubAuZX6R 5 жыл бұрын
Is it possible for it to recharge the batteries when it's coasting?
@mcduffchannel 6 жыл бұрын
Bruh! Ive been thinking about doing exactly this to my board but as a 2WD. Youve answered my plausible question. Its a mod to a wowgo board so itll be 40v, so im curious to see how they behave.
@linusgk5042 5 жыл бұрын
Where is the update? :O
@AnythingMike 6 жыл бұрын
Who else is just watching this but know they will never build it??🤣🤣
@NiNjaTurtLe697 5 жыл бұрын
Me.
@KevinBE87 5 жыл бұрын
Yup!
@MuNcHiiEZzz420z 5 жыл бұрын
If only i had money haha, I would turn an old motor bike into all electric
@skydrones2012 5 жыл бұрын
Me too , because he's building crap board with crap stuff lol
@husse843 5 жыл бұрын
Standard XD
@cloudcent2991 10 ай бұрын
Pure masterpiece.
@hotel5441 5 жыл бұрын
Where can I see the follow up video to this one referenced at the end of this video, where the voltage for the motors is increased, the charge port and the BMS are installed. I have been looking but can't find it. Can someone post the link?
@niniliumify 6 жыл бұрын
Excellent Build! Next... ...hub motors for the Samba?
@Unbikerloco 6 жыл бұрын
Nice job
@TravisInCanada1 5 жыл бұрын
How much experience do you have on a skateboard? Also when you let off the speed how is the braking? I don't really understand how electric motor stop without a clutch or throwing it in reverse.
@michaeld954 5 жыл бұрын
wheres the update build i want to make one but has to go faster then 10mph
@mashedpotatoes5323 4 жыл бұрын
Use a 14s or more battery
@Yotraj 4 жыл бұрын
@@mashedpotatoes5323 Use taller tires.
@mashedpotatoes5323 4 жыл бұрын
@@Yotraj that's pretty difficult with these types of hub motors because there's not a lot of aftermarket tires, it's possible to make your own tire with a mold but I personally wouldn't want to do that because it seems hard. You also lose a bit of torque with taller tires but I don't think that would really matter if you have 4motors.
@taetravels8502 4 жыл бұрын
I have the parts but I need the guidance of part 2
@lil_weltthomas7118 4 жыл бұрын
But he's going way faster than 10 miles per hour
@dejayrezme8617 6 жыл бұрын
Awesome project, thanks! That looks pretty fast as an alternative to a bicycle. Which is really what you want to get around town. I have to look into this more, what is the best way, hoverboard or electric skateboard or e-bike? It feels a hoverboard would be better because you can control the speed with your feet instead of needing a remote. Another problem is of course the legality over here in Europe :/ EDIT: After looking a little, problem with hoverboards on even slightly uneven surfaces is that any vibration changes the tilt and makes the ride awkward as a transportation vehicle. So skateboard is probably actually better.
@ldhaber 6 жыл бұрын
Any news on you collaborating with Corridor Crew on their boosted board battery?
@jehugarcia 6 жыл бұрын
dont know who they are
@ldhaber 6 жыл бұрын
kzfaq.info/get/bejne/iZ9hbLNy39-rqI0.html
@ghos.t4968 6 жыл бұрын
They used be known as Sam and niko
@deagle50ae 5 жыл бұрын
Please make this happen. Ren + JAG would be a great time. The Coridor Crew love their electronic mobility
@deagle50ae 5 жыл бұрын
This would be an awesome collaboration. Ren loves his hoverboards, one wheels, and built an electric bike for his wife.
@CristianStancu 5 жыл бұрын
How did you make the battery terminals? I'm looking for a way to use the same 3D printed design for a ebike battery.
@joaquinninoortega156 3 жыл бұрын
if you have existing esc could you just buy another one and solder it yourself? can you also share the diagram its like a 2 dual esc solder together. THanks
@rodneyhustle1 4 жыл бұрын
Damn pro you have talent! You should make a book with projects and sell. I’d buy one for sure!
@ramoncevallos2517 Жыл бұрын
Que bien. Que precio tiene cada parte para ensamblar uno de estos vehículos eléctricos y un plano para armar.
@hot23433971 6 жыл бұрын
hey! this is really nice but no one out there has done a proper super capacitor board, i mean its the best thing you can opt for in a skate board. it has a longer life cycle, gives instant energy which means better performance and can be used to capture energy back while breaking. i hope a lot of people upvote this so it becomes a thing on youtube.
@njfulwider5 6 жыл бұрын
wondering if using the other wheels with the motor and bracket on the outside would work with this cable setup. should give you more power and speed??? Great Video Jehu!!!!!!
@njfulwider5 6 жыл бұрын
No, there are wheels made for longboards, and the motor is on the outside, and sometimes the cost is cheaper than hoverboard wheels. Here is an Example-www.ebay.com/itm/2Set-Smart-car-Self-balancing-Kits-Wheel-176r-min-Motor-6V-bracket-Good/181561849459
@mygamertag2010X 4 жыл бұрын
You have no battery management system or do the individual cells have their own boards?
@LeonCamero 4 жыл бұрын
He has to install one. I'm interested in how to do a BMS on that casing. Looks clean.
@Pascal_Robert--Rc_Creations 4 жыл бұрын
What about a bigger rubber over the tires? Bugger radius, more speed...
@robgibb3081 6 жыл бұрын
try industrial Velcro for holding the batteries up
@jthawken123 5 жыл бұрын
How do you charge those cells up? Individually, only those in parallel, only those in series, all of them at once? I'm needing a power system like this, just don't know how to recharge them all! Thanks!
@3dChris 5 жыл бұрын
How secure are those couplers?
@michaelbouley2294 6 жыл бұрын
The board would make a good camera mount for those low angle shots
@Nicoricanmarxist 4 жыл бұрын
Hey dude i love ur videos. Im in the middle of my Esk8 board build. Im thinking about using the NESE battery holders you used. Did you print them if not ware did you get them? Also did you make a video about installing a BMS with those NESE holders? Because I really want to use those holders but I cant find them in the states or any videos on how the BMS gets wired in. Any help? Gracias mano!!
@MichaelBylehn 4 жыл бұрын
As someone who lives with lots of hills it would have been nice to see a test
@rammstenrique 6 жыл бұрын
I hope soon a video of how to build an electric bicycle, excellent project I see it funny
@charlessilberbauer7148 3 жыл бұрын
Where did you get the remote control? I am looking for exactly the type of remote capability you have in your video.
@gijoe3677 5 жыл бұрын
Hey guys, I was wondering how can I add a third motor to a dual motor skateboard of mine that can run separately. thanks!!!
@Willy_Tepes 3 жыл бұрын
I'd mount that battery meter and switch in a housing over the front axle so you don't have your foot on it all the time.
@COREYEIB1969 6 жыл бұрын
Good work Jehu
@Thatoneguy884 5 жыл бұрын
Is there a way to wire these motors without using the hall sensors? Looking into a sabertooth dual But I’m not sure if it will work
@terryphan7451 3 жыл бұрын
What do you do with the Hal sensor connector on the wheel? Does not look like it connected to anything on the schematic.
@carldavis391 2 жыл бұрын
I'm liking it 🏁.😎✌️
@ricklulu3572 5 жыл бұрын
So did you ever try 48v. I'm thinking if using 60v for more speed and distance. I think you only need two hubs wheel cuz the weight is crazy. Do you think the speed controller can handle 60v?
Oren's Projects
Рет қаралды 293 М.