MOTOR SPOKE HOLE SPACING TEMPLATE - ibb.co/MkggVcL - I found my original template and as many viewers have asked for this I have uploaded it. Please like and subscribe if you find this useful 👍

This is the best video on hoverboard ebike ever, waited a long time for something like this. I started with one motor in the front, but then I wanted two motors and then things didnt go as planned. But bought two 1500w controllers, just need a battery but this project has taken a long time now.

Nice build. Thanks for sharing this video.

So much attention to detail.Thanks for sharing this video.Really amazing job.I have been waiting for this kind of project.

Amazing skills man! Hat's off. A great way to repurpose the motors.

Just made a couple of motors based on your design, great idea using those hollow axles for the wiring (although in my case I drilled all the way through the motor axle and welded the hollow axle in place, then drilled a hole in the side for the wires to go through. I just need to work out how to thread the spokes onto the wheel rim without it going wonky lol.

That's a really neat build. I'd like to do a cruiser style with a teardrop fuel tank for the electronics.

Hi Rob,great project , thanks for sharing it with us. I myself am midway through my homemade ebike project,incorporating my old Beko washing machine motor which I have running on a Lion 36v DC battery pack. I WILL upload a video of the finished product in a few weeks,as I have other domestic duties which need taking care of first. Please keep up posting new videos of your future projects,and I am sure you will gain plenty more subscribers. All the best.

Brilliant, I love using hoverboard hubs on my mobility scooter rebuilds, envious of your battery build, I still use lead acid

Why would any sane person dislike this awesome video it's beyond my comprehension. Great job.

Excellent worck and idea👍

Hi! Thank you for the video. We want to build an e-bike on to fatbike chassis. We want to use 48v 500w controllers on 36v 300w hoverboard motors. In our city there are lot's of steep roads with %15-17 slope. We need to climb them with minimal affort. I am 105kg by the way? What do you think is it possible? Lastly we want to protect the old gears (the bike is 21 speed). Do you think that is possible? Or useful when pedalling?

So cool. well done !!! 👍

This is exactly the video I needed! Thanks!

Very useful video. Underrated channal.😪

Man, you are amazing

Great job !

Nice job. I used an car alternator with the pulley pressing down on the front tyre and this works well, providing plenty of range and around 20MPH. But its heavy, needs a split supply 12 +36 and doesn't look anything like as slick as yours. Food for thought...hmmm. Thanks for fresh inspiration.

*Super travail.* 👍😉

Nice job exelent

Are you using a 36" bicycle or 24" are you using 20" spoke or 24" spokes ?

How did you connect the charge port to the splitter?

We purchased this Vivi 27.5” electric bike and a Tentaquil 26” electric bike for our 13 and 14 year olds. kzfaq.infoUgkxUiL0GnyDjP32RJdd660sP8mZk4CRLTCJ The Vivi was much easier to put together. With the Vivi, there was a video link to assist with assembly which made the process easier to follow (we did put the handlebars on upside down, but it was a quick and easy fix). With the Tentaquil, the assembly was not as simple to follow, but after we messaged the company for an assembly video, it was easier and they did respond quickly. The other major differences were that the Vivi has a grip throttle on the right handle (like a motorcycle) and the Tentaquil has a push throttle that you use your thumb to activate. The monitors were also different, so if you’re looking for something specific in terms of changing the bikes functions, pay attention to what the monitor offers. We were really impressed with the overall quality and functionality of both bikes, but if you’re looking for more power and an easier assembly, definitely go with the Vivi!

good job... I like..

Damn good job

Nice one

hey, I am also working on my DIY hoverboard motor e-bike but I can't get the calculation for spokes holes for the motor flange, as I saw that you did an amazing job so I thought that if you could help me this problem i.e. if you could give some exact calculation for drilling spokes holes that would be great!

Very good your project, congratulations. Did you know you can use the HoverBoard controller? just it needs an firmware uograde to conect the throttle. I big regards from Argentina

felicidades , muy buen proyecto

I'm a scrapper and I have to convince myself to leave the beautiful copper there... But I'm trying to build the same thing because I don't have a truck, I got a bike and a trailer I built but it's getting heavy so a motor is going to help a lot

felicitaciones . lastima que tenga mucho trabajo .estoy seguro que al final pensaste lo mismo que yo . debi comprarme un kit directamente asi me ahorraba el mecanico . la soldadura . el tiempo de buscar el hierro y cortar y lijar y darle forma . es un poryecto.muy bonito tengo uno hecho tambien pero aun tengo que ver el problema de recalentamiento del motor . pasa que le puse una bateria de 15.6 amp . y segun el acelarador esta funcionando a 36 volt . pero me calienta demaciado . un saludo desde Argentina

Ho how did u do the wiring and where did u buy the parts

How do you make one accelerator switch make the booth motors work?

Great build

Awesome 👍

so I've looked at the template but I'm having trouble converting it over to mm. 18mm for each pair, the 41mm for the space in between each pair? I feel like I'm missing something here lol

Great project. I'm trying to do similar but what is the difference in the position of the holes with respect to the other half?

how long does the battery last?

Great project Rob. Did you use one bms or two?

Speed?

Well-done Sir this is a very great project. I have two questions sir 1 what is the top speed kph ? 2 how did u go about with the holes on the hoverboard motor what calculation did u use

Hola,muy buen video. Yo puse el motor delantero pero no tiene fuerza para subir ninguna subida y tengo que pedalear. Con 2 motores subiría las cuestas sin pedalear? Gracias

Waw! That’s cool

Nice job, what speed do you get with your bike ?

perfect.

Aren’t the spokes shorter with that new wheel hub? Did you have to adjust the length to suit?

@RobMakes I have a few questions if anyone can answer them pls: - 1.5:02 How can I get this holed bike spindle? 2. 9:36 are these torque arms necessary? or what are they for even? Man answer them for me and I promise I will subscribe

Es un gran video un joya

link to the controllers and thottle pleaseeee

Motor controller link please

Top speed? 🤔

How can I open the hoverboard motor? After I unscrewed the 6 screws it is still stuck. It seems there is something else to release

Excellent ingenious build!....and this is a total fluke - I got the exact same board for pretty much the same price! (£14) although on mine, half the cells in the battery were dead.

I have a question...how about drill batteries is it fit also for bms you made?

Where did you learn all the electrical engineering from? School or just self taught? I understand petrol engine completely but don't know all the electrical stuff...very impressive work

I was wondering if you could help me determine a hoverboard's motor's sensor wires in correlation with the controller I have?

hi what did you connect the charging port to was it strait to the battery

Hi, may I know the durability of the welded shafts to motor? Are they reliable for day to day use?

Yo could you like make that template for the holes in the hub motor downloadable or something?

did you shorten the wheel spokes?

Very nice project 👍.What length off spokes you are used for this rims and what controllers ? I'm burned both 250w controllers after 5 minutes on my 2WD scooter with Segway motors rewired to delta connection.please let me know

You can use both batteries with one bms just do 1 pack (with 4 batteries 3.7)

now heres a question. Ive seen that you can also use one of these motors as an alternator. If the front tire was set as an alternator instead of a power drive, would it develop enough charge to continue charging the battery enough to keep riding with the rear set as a drive motor?

I want do the same but with a 2800w scooter motor viper dual motor 5600w

What tools did you use to cut the wood?

Hi, what is that mini 3 pin charging port connector called? Been looking for it for ages

Where did you find free scrap laptops? I'm trying so hard to find lots of broken ones and nothing so far.

how many kilometers can you drive with one battery?

А как разобрать подшипники по менять???? Или датчик холла?

I’m too broke right now to afford welding materials and drills. Great video though

What battery is suitable for a motor in terms of voltages and amperes

What size spokes did you use?

Who can explain me how to do the power splitter with xt60 conectors whithout die in the process, pls

Really like this video but only one thing how do I connect the charging socket to the battery

I have no engineer or electronics training Never worked in a workshop before. And I've built some good ebikes & E-scooter out of scrap parts. For next to Nothing There's people on KZfaq who called themself professional E-bike builders 🤣. And they haven't got a clue All they know is to put a plug and play kit together. Which anyone can do And they charge £800 for 1-hour for non skilled work. And the buyers are very happy with that.

Can u make a video with the motor wireing?

How do you charge the battery?

What is the maximum speed it gains on full throttle?

laptop batteries are Not high drain and will fail on a high current draw situation, better to find a battery (s) from a power tool as they Are meant for high drain applications, example is a laptop or say or other low draw applications average around a 5 Amp high drain whereas power tools are more in the range of 25 - 35 Amp high drain, the lower ones will burn out the safety fuse in the battery. Also why not use the hoover board's built in BMS and controller board? it has most if not all you need to make one even cheaper, convert the position sensors to switches, etc ?

hi sir, i have 2 hoverboard motors but no bike card, so if i connect the 42v hoverboard battery to 2 hoverboard motor and put 1 key, will it work

Que rin es ese 26? O 24?

very good project, what IS the top speed?

This is very complex. I would go with a chain drive system and rewire the motor from star to delta for faster speeds.

Не понял, как получилась новая ось ?

Plz reply what’s the maximum kg this can handle?

very good project, me in my video I used a single hoverboard wheel by friction, 48v battery and my max speed is 52 km / h, and you how much max speed? thank you

How about teaching me how to convert my all-terrain knee scooter into a just-my-size electric mobility scooter that I can afford. Please.

is a 26 inch tire?

Hi , how do I space out the spokes ? Please educate me on this subject

I have a motor from an e scooter how do I know how long the spoaks have to be? I need help...

The sondor's bike

What is the top speed

Por donde compro el controlador?

Link to the controlller

speed limit?

Do you have the link for the motor controllers?

how fast that go

I need a scrap hoverboard,Is there someone courier me ?? It is absolutely impossible to find where I live

Wouldn't you have got away with just the 3 phase wires out of the hub?

Can we know the maximum speed and time please