Thanks for explanations. And what about their final heading? Is it a preperation for go arround or what?

uncleoky normally we put the inbound heading/runway heading. Lnav should arm automatically in case of a go-around 🙂

@Sudha Sethi How old are you? because u look like 8 years old and ur already enthusiastic about aviation hopefully you become a good pilot

me

Washik what a coincidence I am just starting up X-Plane

Does X plane mobile count?

airbus 737 no

In the FMS on the INIT REF page, you select the flaps you will be landing with depending on conditions, rwy, ect. As shown, the standard flaps 30 was selected and a corresponding VREF speed is shown next to the flap 30 settings. The VREF speed is then bugged on the tape and normally add +5kts to account for minor oscillations as you never want to be below VREF spd for your landing weight and flap setting.

Vanilla Ice

💀

Aljaz Prislan 👽

In real life for precision approaches, most airlines tend to put the captain in charge with the landing so the first officer will be the Pilot Monitor just to avoid confusion during this critical phase of the flight.

The reasoning is, the captain is PM to be able to look out for visual cues. The FO's task is to monitor the instruments and in case of any deviation initiate a go-around. Some airlines do it like this and some leave it to the captain to be PF. Both ways have it's pro's and cons, changing controls at this low of an altitude might seem strange but like I wrote it has the benefit of giving the captain the capacity to look outside. Hope that explains it for you :)

@@RoRailSystems It's the other way around. The Captain is ultimately responsible so he makes the call whether to continue or go around. The only way he can do this is being PM for CAT II, and CAT III approaches.

that is the Autopilot disconnect sound. That is somewhat normal.

Well, a/t system have the possibility to be manually decrease after passing 800 feet in ARM mode

Because as we found out after the accidents....there are very few Max simulators going around because supposedly pilots wouldn’t need them

Yes that's true.

its normal to do so and I do when landing, they may have either forgot about the heading or the standard missed turns to the heading selected incase of a go around

No it is not. The reason pilots (mainly the Pilot Monitoring) keeps the heading updated is good CRM- crew resource management, as if ATC vectors you earlier than you expect and your heading is way off, you don't want to arm HDG SEL and have the aircraft initiate a turn in the wrong direction.

Rohit kumar 🤓

Foster101 fuck no wtf

What's WTF in this, if you think other wise care to explain?

Foster101 I have to say no. CMD, means the autopilot computer is engaged, it is show during the whole flight. And after activating APP, single ch appears indicating only one autopilot is engaged, now you can also engage the other one, then it either shows LAND 3, or some other type of configuration you’re using.

@@ramind10001 yea but that Land 3(in fail operational) or CMD (in fail passive) comes only after the self test and when flare arms, before that it's SINGLE CH (after LOC capture) even if the 2nd autopilot button is pressed( coz the 2nd autopilot is still not connected to the flight controls). But in the video it's different.

Foster101 NO, see CMD, is shown both for fail passive and operational aircraft, Land 3 is unique to fail operational, and is show when the second autopilot is engaged and after the test. I’ll send you a pic from the sim :)

THIS is exactly the sort of dangerous practice which comes from people who spend too much time trying to fix things which are broken and get WAY to comfy in the sterile environs of full motion sims. Go fly the line or even suggest this and see the reaction you get. Just wholly impractical in the real world where most FO's are fully qualified and fully proficient and sometimes even a better "stick" than the Capt. He/She either flies the entire leg or they don't.

You got that it was an autoland right? The only thing the PM took over from the PF is the trhust levers which were on autothrust during the entire approach. After touchdown the PF (former PM) will disengage the AP and manually keep the aircraft centered. On a "normal" CAT I/II ILS Approach either the Captain or the FO will commence the entire approach. NOT during an autoland.

You should "park the attitude". I have flown jet aircraft of various types from small business jets to the B747 over a period of 40 + years. One thing I have learned during this time is that various airlines and credible organizations introduce changes to SOPs based on causes of previous accidents. Each Airline I have flown for (3) had some differences in their SOPs, and most had some level of credibility in their reasons. In this case, there are many advocates in the Flight Safety Industry who promote the switch over at "Landing Commit Point" as discussed here. THE SINGLE LARGEST CAUSE OF LANDING ACCIDENTS IS A FAILURE TO "GO-AROUND" in a timely way - if at all! SO - the difference in this SOP style is that Flying Pilot is pre-loaded to 'GO - AROUND" and only if the Monitoring Pilot Sees the proper cues and the aircraft is in a Position to Land - then that Pilot takes control and lands the aircraft with a "Positive Handover". Having said that, every company I have worked for still used the Flying Pilot Lands the aircraft, but there are many credible airlines doing it this other way - and it has some very positive reviews in the Flight Safety Industry. The ADVANTAGE to this style besides the philosophy of 'EVERY APPROACH IS A GO - AROUND " unless interrupted by a landing, is that there is no need to look up from the instruments at DA and acquire the Runway Environment and "DECIDE" during an Approach To Minima.... In this case the Pilot Monitoring is already looking outside and has acquired the runway and analyzed "Position To Land" saving critical seconds and increasing safety margins. Just because something is different from what you have been taught or exposed to previously does NOT make it wrong. Cheers

Aditya Kamble fuck no wtf

Ali Shah ☺️

Yes I am...

@@dusanpavlovic7195 да ми је један овакав симулатор код куће... Откуд ти у литванији? Лепа је то прича

it's for both, according to mentour pilot

Several operators FCOM manuals state this is when to put the gear down. However, other operators may wait until around 4nm out.

It is very short and basic but not wrong. Indeed a 737 with fail passive does not engage the rollout mode

@@gabrielprates8385 yeah i misunderstood

Why not?

*HAHAHHA SO U ARE A AIRBUSLOVER* ?!

+Anderson Danice are u AIRBUS LOVER

+Anderson Danice yes i m

Its vintage

If it ain't Boeing I ain't going

But it makes you more of a pilot than MSFS2020 ;-)

The video aligns with my operator's FCOM manual. What errors did you notice?