no stupid music, straight to the point, no benchies, engineering filament, functional part. subbed.

Great to see I didn’t made a mistake with my order for a P1s with a AMS 🥳

How does this guy only have 10k subs? This is good work here. The audio is great, the video shots are great, and the content is true. I have both printers and he is spot on. I wonder though, if the model has bodies and split into parts, the imperfection can probably be overcome using overlap on that specific part.

The enclosure for 100 bucks more saves me from failed prints due to yellow lab hair flying into my prints.

I can sense the absolute sincerity of this comparison. Well done sir!

Thank you for this video. It’s was straight to the facts. I’ve watched about half a dozen videos comparing the two and yours was the most straight forward. Thank you!

Good take on these 2 printers. I would like to see the close up of the vise grips to see the first layer issues and compare the prints. Thank you for this great insight!

Thanks for the side by side. Reallly helps making a decision as a first time shopper for a starter printer

High quality video with great content. I wish all youtubers had your audio setup - sounds terrific.

Great content, subbed immediately! You just confirmed my reasoning and P1S is on it's way. Looking forward to see how it compares to my Raise3D Pro2 in consistency with which I had 100% print success and 0% issues for well over a year now printing almost non-stop. Again, great content and superb quality 👊

Thank you for this video. I live in a small space and actually ordered the P1S because I have a bird that I didn't want to fly into an open printer haha. It's nice to see that I made a good choice to stay with the P1 instead up the more expensive X1.

Nice to see more and more of your productions on KZfaq. Keep up the good work!

New sub. I appreciate the review with true, common sense that went into it. Awesome

Thank you for an excellent review. Simple & to the point!!!! If/when the time comes for an upgrade, it'll be the P1S.

I love how this guy goes straight to the meat of the decision making! I’m going to buy the P1S as budget is a factor to my purchase. Thank you!

Perfect video, and coincidentally exactly what I was looking for - an ABS comparison.

Loyal you're putting out some of the best content on the bambu printers. Really good break down of each printer against one another ❤❤❤

I posted this on your 23 machine buy or not buy video..... I just wanted to post this again here only because your talking P1S. Loved the video and looking forward to more of your expertise. I brought a Bambu Labs PSI Combo with the AMS and had it all up and running within the 15 minutes from unpacking the box to printing my first print with 2 minutes to spare just like Bambu Labs advertised. I started printing everything from poop containers, fridgets, signs, filament spools, and tons of other stuff along with a rack to hold up to 66 boxes/rolls of Bambu and Sunlu filament in their boxes. I've never owned or operated a 3 D Printer before. I've learned so much from trial and error with things like heater head temp changes to unclogging the head, changing build plate temps to help different filaments stick better or not. I printed off LED Risers in order to install more lighting in the print chamber. It's great and I love it. Thanks for all your help with your videos..... FYI, I've had the printer since the last week in Nov 2023 and as of today Feb 2024 I've used a little over 18 rolls of filament, printed hundreds of pieces and have 752 hours of print time on the P1S. I am proud to say that with that 752 hours of print time I've only had 3 issues with it and was able to solve those issues within a few hours. The P1S has been running almost continuously since I got it. I am definitely addicted to it. Now that I've practiced for the past 5 weeks almost non-stopped I'm thinking it's time to find a way to make a little money with this beautiful machine. Any ideas would be helpful..... Thanks again for all that you do......

Great video! Watching this after having gotten a P1S and I’m agreeing with your sentiments

Thanks for helping me to decide.

Thanks! I’m currently considering busing a p1s instead of a x1c because oft the price! This videos was helpful!

I like your videos dude. The KZfaq algorithm found you and I like what it found. Subscribed Thank you so much for doing a comparison without using PLA. Thank you!

Seeing all the amazing prints from a bambu printer makes me really want to save up for one with the ams

Got the P1S 2 weeks ago. Incredible printer for the price.

Very nice overview thanks!

Stumbled across your channel recently as I am wanting to get into this amazing hobby. I used to be a guy that started cheap and worked their way up, but I just dont have the time and patience to "tinker" with something needlessly. That's not to say I dont like to problem solve and be creative as I do, but I want something that is generally going to work out of the box and any tinkering is done because I want to upgrade or I choose to do it. Anyway, going with what you say, I think I might just spend the extra and get the X1. You have earned a new subscriber for sure. Thanks

6:03 this is the exact sentence I was looking for thanks!

thanks for the video reallygood to the point and convinced me to get the p1s

I was looking at getting my first printer, and was having trouble deciding between a p1p and a p1s.. mainly because I know nothing about 3d printing at this point. Thank you for making this vid, I'll be grabbing a p1s.

Amazing video and explanation I immediately subbed

I have been kicking around between the X1C and P1S. I think the X1C is getting the nod if I go with it, mainly because I am planning to print in PC, Nylon and such. Yes, I can upgrade the P1S with the hardened gears, and nozzle, etc., but I'm kind of done with the "Tinkering" aspect of the hobby after nearly 15 years of doing it (yea, started in 2009 when the Mendel designs were released). I'm at the point where my Ender3 and CR-6SE are just not up to the task, and require me too much time to mess with after thousands and thousands of hours of print time. it is time for a new machine. I'll put these with my home built Mendel from 2009, and my i3 home built unit. Forever to be displayed in the shop. :)

Thanks for all your information, I'm new to printing but it looks like the P1P for me. Keep up the great work! If you need to thin your herd of printers let me know, I can help.

Your print studio is sick 👍🏻

Great video, Thank you.

I totally agree, got the P1S AMS recently, I go as far as saying that it is the best printer for that budget in the entire industry.

Thank you. I have been trying to figure out which one to go with.

I have a X1 carbon and I love it. 📶💪🇺🇸😎

Just got the P1S it's a very cool printer

the price diff between the P1S and X1C is literally a grand in my currency, this comparison makes my upcoming decision a no-brainer!

This is a fantastic 3d printer

My wife told me to get the X1C but now I'm debating... thanks!!

I have the P1P that I upgraded to the P1S and I haven't looked back at my Ender 3 v2 since. Looking at the Qidi 3 Max for work too.

Awesome quality I'm subbing for sure, found this video cause I'm in a dilemma to either get an x1c combo or a p1s combo and pay like 100 eur more and get a p1p as well so i can print multiple part stuff out faster. after the video I'm really leaning towards the p1s ams + p1p

I'm going to order 1 or the other in September. Id rather have the P1Scombo because of the price. But it all depends on how fast they take to send it. The X1C combo is in stock all the time but Ive seen people complaining about lengthy wait times on the P1S. With the P1S gaining popularity Id imagine the lead time is going to get worse by the time i can order mine.

This is the printer that made be pull the trigger into fdm printing. It’s epic

Thank you for your honest breakdown! Quick question: The process of upgrading the gear and extruder for the P1S should be exactly the same as the P1P right?

I could never afford these type of printers. They are SOOOOOO AWESOME tho and GREAT video

I'm getting ready to throw my CR-10 out of the window. This was very helpful for what to replace it with. Thanks!

This video helped me decide between the two. Have been thinking about it in and off for a few months, and hadn't found a video that quite highlighted the details in the difference between the two. Looking for something to compliment my UP300 as I look to start printing more parts.

Merci pour votre sincérité qui apporte la réponse que nous recherchons. Je peux affirmer que la plupart des youtubeurs nous racontent des salades !

i wonder if using a 0.2 mm for high detail printing would make the difference. at that point though i would just use resin for high detailed printing. thinking of pulling the trigger on p1s with hardened extruder, nozzle, and print mat. with AMS. thanks for this video. cant wait to ditch my constantly breaking ender 3 that gave me nothing but frustration.

Great review!! I'm considering getting the P1s after having the A1, suddenly thinking of getting the X1. But after viewing your review, I'm happy to get the P1s with AMS, if I have the money to spend, I'll get another P1s without AMS. Two is better than one, right? ha!

Hey I really enjoyed your video. Now I only print in pla now and have only gotten one spool of TPU. I plan on sticking with just these two for now. But which would you recommend between the p1S and the X 1C. I’ve had and Ender 3 pro for 2 years now with a sonic pad. I’m just ready for better print quality and tired of always messing with the calibration set ups and tuning.

Thanks I was struggling to choose for the best price and quality ratio I’m going for the p1s.

Wow there’s no layer lines 100% awesome prints loyal both look amazing in quality

Thanks for a awesome video, I am in two minds as to which on to get as well. My question has the X1Carbon improved a lot since it was launched or since this review. Has the Lidar firmware been improved etc. Basically a big improvement ? Thanks

Alright you sold me! I am ordering a P1S

I got one on the way

One problem w this channel is that after spending a full video listening to your calm voice and gazing into your doe-y eyes i'm gonna buy anything you recommend 😶

Hey LM, just found your channel and pounded through some of your latest videos. I really appreciate the content and your take on some of the newest printers out there. I'm curious, for someone that only prints PLA and PETG 90% of the time, what would you recommend between the X1C and the P1P? I'm interested in speed, AMS, and not having to worry about leveling. Would love your input, thanks!

Dang man, if only Bambu would build a printer with an adult sized printbed. Id get one in a heartbeat

The issue I have is deciding between the P1S and the Qidi X-Max. You give up a well polished product for a heated chamber and build volume. Would love to hear people’s thoughts. First printer.

I had the X1 Carbon, loved it from day 1. Until the problems started. Carbon rods got so worn the machine started to vibrate alot. More problems arose so i sold it off before it broke down completely. Today i ordered a P1s. Can´t wait until it gets here. Gonna be fun tinkering with it. Thx for this vid.

I need one of those NOS storage devices

Hello, The Bambu Lab P1S can print nylon and carbon with some add accesories? Thank you for your review, was amazing!

Wife & I just got our first P1S a few days ago. Which also happens to be our first 3D printer. We were both impressed with the print quality. I’m personally looking to print internal PC case components. However I’m not sure which material to use & if I should buy another P1S or get the X1C as research has shown PLA warps in high temps.

I just got the P1S Had it for a few days, it does print great, I am excited to use Different materials, but I do think there are somethings they need to fix, the screen is useless, I tried to print from it and had to go to the PC or app to get it to print. Another thing that is buggy is the sensors. it has a filament detector in the hot end and it will error even with it empty. the cover for the hotend as well causes errors. But the biggest weak point is the wifi, it drops off and is very weak. I usually have strong signal, but the screen shows the signal as 1 bar. Most of the errors won't clear until you reboot. Now don't get me wrong, I love the build quality and the print quality and think the price is fair, but lets be honest, its a very buggy product with great potential. Its still the best right now. Hopefully firmware will help in the future.

The main issue with the AMS is the fact that it has to waste filament swapping between the different filaments. If Bambu added a second extruder, it would either not need to do that, or cut down on the amount of swapping it needs to do.

this is amazing video. thanks for the download . how hard is it to setup the p1s. for printing . please let me know

As I don’t have a separate room for printing, the Bambu Lab printers are too loud for me. But speed isn’t so important for me, so my question is: are there „quite mode“ profiles in the slicer? Do you think, this is possible?

Heloo !! P1s and x1c same speed of printing ? Thank YOU

Thank you! I'm so tired of seeing reviews where PLA is used for the example prints. I could care less about printing PLA trinkets. I could do that on my 150 dollar ender.

Still on the fence about which one to get AND also should I wait because I’d like a larger one 🤔

I have a question, do i need to keeo the door open or the top of the P1S to print PLA? Or its okay to leave it with everything closed?

Can the P1S with the necessary upgrades print Polycarbonate and nylon just as well as the X1C? Really leaning towards the P1S after this video. It says its capable on the website.

Make I ask how well the P1S filter or cover the fumes? If I get 1, it will be in my small office.

Hi! Thanks for your review! Is there a difference in terms of noise level between the p1s and the x1c (when doors are closed) or is it similar? Thanks a lot!

There shouldn't be much, if any difference in quality between these two if they are tuned properly. But, that's just my opinion. You can do a flow calibration print on the P1S/P1P and get the same results if you know what you are doing.Another note, for only $192CDN, you can upgrade your P1P to a P1S, which is a hell of a deal considering if you price all the parts separately, the come to over $280CDN!!! Why would you NOT upgrade your P1P for such a small price?

Hey, hope you are doing well. I Loved watching your Tutorial videos on KZfaq. as a beginner in the 3d printing world, i wanted to consult with you regarding which printer i should buy. I've done some research and seen many models out there. My main concerns regarding which printer to buy were: 1.Precision of the 3d model. 2.Printing Multicolor 4+ 3.Top Layer quality of the print. 4. can print big models So the best printer i found to match my requirements was the: Bambulab X1C, since it can prints multi color. i also noticed that there's something called Pallet 3 pro, but i didn't like the quality that was printed with this tool. So I'm here to ask you if you can recommend a printer that fits my requirements? my budget is up to 1,500$ for the printer. The main purpose of the printer is to print colorful 3d action figure models, that's why i need the precision. Also printing big models like masks or big Pokémon dolls and try to retail them after in my local shop. I Would really appreciate your help and advice!

I subscribe and give you a 'like' because you answer most of the questions that are pertinent except for maybe one that I posted below.

I have an X1 and if I’m not mistaken..in this video you are running a textured bed. In which the flow calibration does not work with it…so this would effect this comparison?

Drawinmg, you going to do an art stream?

Can the extruder and hot end on the P1S be upgraded to the hardened steel one that is used on the X1C?

What speed were you printing ABS? were they printed at the same speed? Enjoying your vids. I am trying to decide between the K1 and Bambu offerings X1C is not off the table, but Money is an issue.

If I add a hardened steel nozzle on the Bambu P1s, would I be able to run CF-PETG without any other modifications? If I wanted to be able to run carbon fiber nylon or CF-PET, only then I would have to get a different hotend? I am trying to make sure I understood your last statement about the P1s. Thank you for your time.

My Creality CR-10s just died and instead of replacing the motherboard, I decided to upgrade because of the inconsistency of its prints. Does the Bambu x1c print more consistently than the p1s because of the lidar and spaghetti protection? My cr-10s messed up every other print in any number of ways, so I'm really looking for a printer that will print almost always.

Hey, what would be your choice between the P1S and Qidi X Max 3 ? I like the P1S more than Qidi but i would love to have the print size of Qidi X Max 3. Thank you.

What extruder comes with the PS1? I know that the 0.2 can do fine details and that you have to upgrade the extruder to do materials that have carbon glass in them is that right? But what comes with it? Someone said buy the .02 and the .06 and the hot material components? Super newbie here. Just started watching videos yesterday before I make my purchase. I plan on getting the PS1. It's just for printing toys and fun things with my kids. Nothing more for now. Subscribed

If you don't need all the added features of the X1C then get a P1S with the AMS for less than the X1C.

The AI technology I think can be replaced by visual inspection, the issue I am concerned about the most is at the beginning when printing an object with an almost horizontal surface, the P1S sometimes fails. Good video!

Man I just found you video thank you but can I print carbon fiber on the p1s or can I upgrade it to do carbon fiber I don't want to spend the money on a x1c cause I will only be doing carbon printing once a month

You need to compare Budget Filament on the X1C vs P1S. Big difference, the X1C will print all filaments with great quality where as the p1s will struggle.

Anyone point me in the right direction for the fan shrouds for the P1S upgrade? The MC fan, and the Cabin fan? I have been printing in the P1P in a tent up till the time I got the enclosure done, the back for the P1S won't be available till 7th of next month, so looking to get ready for it... Bambu Lab.. if you see this.. can you please get those files up and available for us? OR.. are you selling these? Either or.. we need those files.

With both printers sharing the same surface/table/stand, do you think vibrations from either could have affected each others quality?

If I was looking at either of these two, to mainly print CF, which would be the pick?

Just got my P1S with AMS for 850!

Would’ve loved to have seen a more in depth comparison- same filament on both, but different benchy’s and tolerance test, overhang angle test, stringing test, etc. this video was good for an “at glance” comparison, but I don’t think it was informational enough to help someone decide which machine to buy for long term use.

Aside from Lidar, the other big advantage of the X1C over the P1S is that it supports more materials, no? BTW, any thoughts how the Bambu P1S compares to Infimech TX?

Which machine would you recommend for 3d printing shoes? Has to have a work area of 300x300mm.

My enclosed well p1p prints asa almost exactly the same as my x1c. I've calibrated all my filaments in Ocra slicer for both machines though so I don't use the lidar.