🎉 congratulations Chris your one of the go to people on this stuff 😎👍
@Borgdrone00013 ай бұрын
Omg! I just realized I've watched all your videos, but forgot to subscribe! Ive learned so much from you. Thank you good sir!!
@ItsMeaDMaDe3 ай бұрын
That’s awesome thanks for the sub and the support!
@davidzizza2 ай бұрын
One thing I think needs addressing in your excellent presentation, and that it the "Auto-Orient" function found on the left side of the control strip. It may solve many of the questions surrounding the best orientation for each item on the bed or minimally be easier for newbies to manage. It would be interesting to do a comparison and see how it stands up to manual orientations.
@DarkbirdyАй бұрын
As a new Bambu user (P1S) who is fairly new to 3D printing in general, these videos have been absolutely invaluable in learning the software and how to work with it. I've watched each on the TV with OneNote open on my laptop, taking extensive notes. One thing I hope you'll cover in the next video: Infill. Bambu has a huge number of infill options, and I know that some are better for speed, others for strength, but which ones and when has been really tough to figure out. A video similar to your support options video would be an excellent addition to this series.
@robmcdonald68083 ай бұрын
50,000?!??! That’s awesome congratulations sir you deserve it 👍🏻🎉🎉🎉
@SaiLentKnight3 ай бұрын
Great tips delivered clearly! 🙌
@aberodriguez41493 ай бұрын
Congrats Sir !!! 👍
@BhavashJ3 ай бұрын
Congrats on 50K subs! Thank you for this vast knowledge you've provided.
@brent_the_programmer91083 ай бұрын
This is the video I've been waiting for. Thank you!
@madmedic46623 күн бұрын
Thanks for all the info. Your videos are super helpful!!!
@steve30b3 ай бұрын
fantastic video. thankyou chris..
@AsdasdAsdasd-xq1nr2 ай бұрын
Very good and on-hands conclusive help.. thanks❤
@homemovies75120 күн бұрын
Just excellent! I bought a dozen STLs (that I think was positioned for a resin printer? - I have a Bambu X1C) and the "native" positioning seemed very odd and some of my prints were awful. Your tips help a lot (although some STLs will still need a lot of delicate prep work.).
@jendrarambharos43793 ай бұрын
Congratulations! You're my favorite 3d printing how-to channel! Also, not sure if something changed in your audio gear, but your audio sounded more boomy and had some harshness with a tight echo, like sound was bouncing off of hard walls. Your previous video audio sounded much cleaner. Either way, great vid and congrats again!
@ItsMeaDMaDe3 ай бұрын
Thanks!! Yeah my regular mic broke and I was using something else. Trying to get it back to what it was for the next vid.
@MWE-6932 ай бұрын
Awesome Playlist, please keep them coming on Bambu Studio. Add another subscriber & multiple👍's!
@ItsMeaDMaDe2 ай бұрын
Thank you! Will do!
@goatelope7539Ай бұрын
Thank you for all of your support
@ItsMeaDMaDeАй бұрын
Your welcome!
@Bornmong2 ай бұрын
Thank you
@dmsmoke261Ай бұрын
Thank you for the instruction. It has been a valuable way for me to learn to use the Bambu Lab 3d printer and slicer. Is there a way to customize the BRIM? I am trying to print a model where only one small area 2-3 mm is not adhering to the print bed. The small area repeatedly "breaks" off from the bed and model, but the rest of the model adheres well.
@Red_Rubber_Duck3 ай бұрын
I cut my hand open removing supports this morning. Release that new video asap dooood
@ItsMeaDMaDe3 ай бұрын
Oh man I’m sorry to hear that one tip to help now is get a pair of cut resistant gloves and wear them when removing supports.
@Red_Rubber_Duck3 ай бұрын
@@ItsMeaDMaDe would a padded helmet help me as well?
@PeterAgostiniJdcap263 ай бұрын
Use pliers straight and bent only
@pridedyankyАй бұрын
Also could be different just between the 1p and 1s and the orientation of the cooling onto the print.
@gordonrain71522 ай бұрын
Great video...@ timestamp 17:10 how would I accomplish rotating the object whilst the object is showing the suggested support points in red? I've tried it under support 'painting' but the rotate function is disabled....again, great video.
@PeterAgostiniJdcap263 ай бұрын
How do you use the puzzle icon in bambu studio? Ty Chris
@cgalvin1233 ай бұрын
Hi, I'm planning to start airbrush painting. What airbrush do you recommend?
@robertwlafferty1533 ай бұрын
Can this program be used with flsun v 400, as bamboo is out of my budget?
@ItsMeaDMaDe3 ай бұрын
No I don’t think so but orca slicer will allow you and they are very similar.
@Offalcrafts2 ай бұрын
my supports often break and I wake up to a ball of spaghetti especially if supports are tiny how do I fix that?