Upgraded mic, upgraded skills. This video combines techniques from previous videos with some new time savers. #3dprinting #tutorial #diy #craft #bambulab
Пікірлер: 116
@datahoffmann13 сағат бұрын
Excellent tutorial!!!
@ashleys3dprintshop5 сағат бұрын
Thank you very much. 😁
@joshuagregoire74103 ай бұрын
Thank you! Your tutorials helped me design some custom board game pieces for my family's favorite game!
@ashleys3dprintshop3 ай бұрын
That is awesome. Thank you for watching and complimenting.
@LisandroGiordanella2 ай бұрын
I discover this channel and its excelent each video I realize I know nothing about the slicer, Thank you !!!!
@ashleys3dprintshop2 ай бұрын
Hello. Thank you for watching and commenting. I am on the same learning journey so as long as you have an open mind you can pick up a lot in a short time.
@sassysuzy4u Жыл бұрын
Thanks Ashley! You explain so things so clearly and make it easier to follow along.
@ashleys3dprintshop Жыл бұрын
I truly appreciate that. Thank you for your kind comments.
@chergenroeder Жыл бұрын
Thanks a bunch. This is exactly what I was looking to do in Bambu Studio.
@ashleys3dprintshop Жыл бұрын
Thanks for stopping by. If there is anything else you would like to see I'll try to make a video. 😀
@jajordan251525111 ай бұрын
wow! I've been doing this the hard way in Fusion 360. Thank you very much for the simple and straight forward video. I knew there had to be a better way. You have earned a sub.
@ashleys3dprintshop11 ай бұрын
😁Thank you very much. There are tons of options in slicer and there may be even easier ways since this video.
@davespray664410 ай бұрын
Very useful and a very "Aha!" moment for sure
@ashleys3dprintshop10 ай бұрын
It was a slip of the mouse cursor and bam new skill activated. A skill I knew of but never tried it that way. 😅
@davespray664410 ай бұрын
That slip saves about 10 steps from my previous workflow 😂
@teearr91209 ай бұрын
Great video!! I wish I would have found your channel months ago, I might have had some hair left after pulling it all out.....lol I knew there had to be a simple method to do this, yet no one is showing it in their videos. I look forward to learning a lot more. Thanks again!
@ashleys3dprintshop9 ай бұрын
😅 about the frustrations. I really like the KISS method if at all possible. More videos incoming. Thank you very much for the kind words.
@tonymarreiros3186 Жыл бұрын
Thank you so much Ashley. I managet to get it right in Fusion 360 but this is so mush easier. I also like the other tips that you have given us. you really make it simple. Thanks a ton. By the way the sound is great.
@ashleys3dprintshop Жыл бұрын
Hey hey. I want to say thank you again for the comment. Revisiting the topic helped in discovering that new shortcut. 😁
@c0mputer10 ай бұрын
This is EXACTLY what I was looking for. And that vectorizing website is excellent!
@ashleys3dprintshop10 ай бұрын
It is a gem of the internet. 😁🤫. I think it's main failing is complex images. But simple stuff is fantastic. Thank you for you kind words.
@SethTurnerPrinting3 ай бұрын
That website isn’t free, sadly
@MAXimator70 Жыл бұрын
Instant Subscribed! Underrated YT-Channel!
@ashleys3dprintshop Жыл бұрын
😁
@rebootnut5 ай бұрын
Exactly what I was looking for! Subscribed.
@ashleys3dprintshop5 ай бұрын
Thank you very much.😁
@tufftimesbc Жыл бұрын
As usual, excellent work!
@ashleys3dprintshop Жыл бұрын
That you very much. I hope this tips makes things easier for everyone.
@jeanettesefers81805 ай бұрын
Great tutorial. So happy I found your channel.
@ashleys3dprintshop5 ай бұрын
Thank you very much. 😁There are many other tutorials and I add them on semi regular basis. Also if you have questions feel free to ask within the comments.
@IndianaGraphics9 ай бұрын
I just bought a Bambu X1 Carbon with AMS. Very interested in videos like this.
@ashleys3dprintshop9 ай бұрын
Great choice. Thank you for watching and commenting. More videos incoming.
@michaelwilmshurst3663 Жыл бұрын
Cool vid. Definitely gunna try this.
@ashleys3dprintshop Жыл бұрын
Thank you. If you have any questions I'll try to assist
@steadytrousers9813 Жыл бұрын
Great video!
@ashleys3dprintshop Жыл бұрын
Thank you very much.
@CGreciful6 ай бұрын
Fantastic. My sister own's a wine company, I'm going to try printing a wine glass with her logo on it.
@CGreciful6 ай бұрын
Hmmm... Curving the logo is going to be challenging. Maybe if I can make the logo into a height modifier I can do it.
@ashleys3dprintshop6 ай бұрын
Sounds great! So I have been looking into curving images and sorta have a solution. I have found outlines of an image/ logo work well. Full images do not work well from what I found.
@mitsuracer87 Жыл бұрын
My 3 year old discovered that if you click on a part/parts, you can change the color by pressing the number key associated with the color in the filament bar on the left. A bit faster than the right clicking/change filament I was doing previously.
@ashleys3dprintshop Жыл бұрын
😁 you're absolutely right. There's a bunch of shortcuts that you can use, like T for text, F for lay on face, m for move etc. I like the fact that you are involving your child in the slicing process. You're creating great memories. Cheers to the youngin' 😁
@mitsuracer87 Жыл бұрын
@ashleys3dprintshop right? I just bought the book " Mastering Fusion360" and on the first page I already learned a whole bunch of shortcuts that I could have been using for years haha.
@andersonrodandchoppe7 күн бұрын
Very nice finish at the end. Curious on how to get the texture and shine. Do you have a video that covers this. I looked on yer channel but haven’t found yet. Thank you!
@BluDog358 ай бұрын
Unfortunately, this method does not work for me. I'm still messing with it, but I followed everything step by step and it does not work.
@ashleys3dprintshop8 ай бұрын
I probably should have asked a few questions first. 😉 Logo to part. How thick is the logo piece? How thick is the part? Is the logo curved? Is the part curved? Is this a vertical (bleh) or horizontal placement?.(yay!) any an all details are helpful if you can share it.
@BluDog358 ай бұрын
@@ashleys3dprintshop So I make custom button boxes for sim racing games. Some people want their names, numbers, team logos etc. I'm testing with an SVG of someone's logo I converted to an STL and placing it on a rectangle I generated and sized using the "add primitive" feature. At first I tried the logo a few mm thick as well as the rectangle. Then I tried the logo 0.4 mm thick and the rectangle 2mm thick. Nothing worked, and I tried a few more variations of that to no avail. Thank you for being so willing to help!
@ashleys3dprintshop8 ай бұрын
@@BluDog35 No worries, here to assist if I can. If you have the file as an SVG already you should not need convert it to stl. You can import an svg which gives you a ton of options. Especially in painting. Adding it to a part can be straight forward from there. You may need to center it, place logo in position, highlight all parts, right click assemble. You can still move parts in objects process at any point, before or after assembly but if you miss click the whole model gets selected vs the part you want to manipulate. I hate to throw a bunch of homework at you vs a straight solution so I'll give you some of my vids that cover it. I try to keep things under 20min. Bambu Studio SVG File Type Tutorial kzfaq.info/get/bejne/aeCJl9SG2bzFY30.html (not completely necessary) Making a 2 Sided coin. Alternative Method Bambu Studio Intermediate Tutorial kzfaq.info/get/bejne/fJ18ZcKDmeCpiH0.html The last video may be good because it shows some fixes if a part's color does not show up, placement, move tool, layers etc. if 0.4mm .6 or more may be needed depending on the number of color swaps or if there is a stark color change. (black/white) Also that vid I sent earlier for "flush 4" example helps if you need to move the part priority.
@amberjackson91672 ай бұрын
Are you using at .4 or .2 to print that ?
@sundance20058 ай бұрын
Great video, something I have wanted to do and you made it so simple (looks simple anyway (-: )
@ashleys3dprintshop8 ай бұрын
Thank you very much. There are more techniques that may simplify even further. All thanks to everyone commenting or asking questions. if you see the 2 sided coin video it shows other options.
@87livinglegendАй бұрын
Amazing my friend. I'm subbing
@ashleys3dprintshopАй бұрын
You are awesome. Thank you very much.
@scottyj2516 ай бұрын
I was wondering how to use a custom logo text and add to the model laying it flush in Bambu I seem to be having a lot of issues. I have Ben using the modifier and trying to color the logo. Still having some issues
@ashleys3dprintshop6 ай бұрын
There are a bunch of ways to do this now. and you can use a combination of flush text. modifier or even mesh boolean. Mesh boolean kzfaq.info/get/bejne/sJqcapiFm9DQmXU.html Text options kzfaq.info/get/bejne/et52hMmKz5PGkYE.html If you have any other questions I am around. Thank you.
@hawtdayum Жыл бұрын
Neat.
@Anthony-nq3hr6 ай бұрын
Could you possibly show how to wrap a logo across an uneven surface like the side of a bowl? Or a plate that is concave? I tried messing around with it a bunch and I can’t quite get it to lay flush with the object. Text works out fine, but not an imported logo.
@ashleys3dprintshop6 ай бұрын
I haven't missed your comment. I have been testing a few ways to do it and may have a couple ideas to flesh out first. Here is an example kzfaq.info/get/bejne/sJqcapiFm9DQmXU.html
@carynstone55894 ай бұрын
I followed allong and it makes my logo a giant rectangle..... I need more help, is it an svg file you put in or a vector file?
@Butrdtostngravy9 күн бұрын
I'm not seeing Assemble in the mouse menu but merge instead. There IS an assemble menu up by the paint area. Did they add more features to assemble then rename what YOU used to Merge? Trying to get a restaurant logo on the Mouse kit. Also do you know if there's a way to put stuff on a curved surface without hurting the original object. Aka i want to put the logo on the mouse without effecting the shape of the mouse
@ashleys3dprintshop9 күн бұрын
Hello. The latest version of the slicer calls what used to be "assemble", "merge". There is another assemble which does a completely different thing so it can be ignore for this purpose. So in short use right click, MERGE not Assemble. As for the curving a logo there is a way to do it. I recommend using an SVG file I have a few videos showing the steps with modifier or mesh boolean. Curved Text kzfaq.info/get/bejne/pahpeMaZ19SdYHU.html Curved image kzfaq.info/get/bejne/lbtgo9d32p6un2w.html
@trevorreinke68457 ай бұрын
Cannot for the life of me get the to work. Watched the video about 5 times now. Trying to print a NAPA auto parts logo and every svg i try to import always seems to be butchered in the slicer, making it into a thousand parts and impossible to paint.
@klukzgaraze4 ай бұрын
Nice, but not working for me, i have inserted my logo, put on object, but after slicing I have just one colour 😞The logo is like disapearing in the other part
@ashleys3dprintshop4 ай бұрын
Sorry about the late reply. There can be a few reasons why a logo may not show up 1 there isnt enough layers to show up But the big one for most folks is the order of the parts Here is a quick video about it. kzfaq.info/get/bejne/eZmUi897p5_UkmQ.html If you have any questions please reach back out.
@heatherbabyy20118 ай бұрын
Hi, I've added a logo to a lid very similar to what you did in the video. The model shows everything I've painted is correct but during printing the white lettering didn't print. Do you have any suggestions on what to do to fix this? I also got an error message stating "Unable to print multiple filaments which have large temperature differences together." I'm using a blue, black, and white. Only one white letter printed.
@ashleys3dprintshop8 ай бұрын
Hello. There can be a few reasons but lets start with the simplest one first. Switch over to Process Global , quality, wall generator: Arachne Another simple thing to try is this. Convert the text type to modifier then repaint kzfaq.info/get/bejne/eZmUi897p5_UkmQ.html If there arent enough layers slightly more advanced kzfaq.info/get/bejne/fJ18ZcKDmeCpiH0.html As for the temp issue you will need to change the filament type to the same brand.(there are other more complicated ways but we can keep it simple. For example if you are printing with PLA set all of the filaments to "bambu PLA basic" you can keep your colors the same. I may revisit the assembly video as there have been many advancements since then.
@nickwright2721Ай бұрын
What about adding a logo onto a football helmet?
@ashleys3dprintshopАй бұрын
Hello, if you are adding an item to a curved surface there are a few options. Here is a video covering the steps Mesh boolean kzfaq.info/get/bejne/lbtgo9d32p6un2w.html Modifier kzfaq.info/get/bejne/fKypn8mnr5a8oJ8.html
@teearr91209 ай бұрын
I followed this video to make a coaster using a Mercedes logo and I can't figure out what I'm doing wrong. When I assemble the 2 (SVG and stl of coaster) the logo disappears when I slice it. If I don't assemble the 2 files, I get a warning of Gcode conflicts. Any ideas? Thanks in advance! keep up the great work!
@ashleys3dprintshop9 ай бұрын
Sorry about the delay had some other projects running and there are some major shortcuts that are available now. I made you a quick video which should solve the issue. It's low res now but 2 hrs from when you see this it should be in 4k. kzfaq.info/get/bejne/eZmUi897p5_UkmQ.html
@rianhull88312 күн бұрын
Lets say you have a coaster with an image on the face but want to add a logo svg to the other side of the coaster (ie the non face side can this be done without it impacting the face side?
@jeeper220025 ай бұрын
like the video but im trying to figure out how to do this but two sided
@ashleys3dprintshop5 ай бұрын
Hello, thanks for reaching out. There could be a few ways to do double sided items. Ideally I would flip the item, add the part and use the "move tool" (m key) to position it kzfaq.info/get/bejne/fJ18ZcKDmeCpiH0.html Also there have been some updates for adding text that could help. kzfaq.info/get/bejne/et52hMmKz5PGkYE.html
@user-nj7dv6sp6m8 ай бұрын
Great Vid! learned a lot. Can you embed a logo like that into the side of a vertical object? Thanks
@ashleys3dprintshop8 ай бұрын
Yes. The angle does not matter much. But if you are printing logs with it can be punishing on the AMS, filament usage and print times. Each color change adds about 90-120 seconds with every change. If you have 2 changes per layer its almost 4-5 min per layer. It adds up fast. Ideally I would make the the prints colors horizontal but nothing is stopping you from making it vertical.
@rexmorgan726 ай бұрын
Is there a way to created embedded text of a different color? It seems as though when I add text to an object and then change the depth to something like 3.00mm and the thickness to 2.00mm I can then change the filament. However, as soon as I create the negative part the color disappears. What am I doing wrong here?
@ashleys3dprintshop6 ай бұрын
Hello, thank you for your question. I think I might have a solution for you. Go to this video about 8 minutes 45 seconds in it covers some more text techniques kzfaq.info/get/bejne/et52hMmKz5PGkYE.htmlsi=HMcxJhL01newvTKL
@jakemccallum82375 ай бұрын
When you flattened that cube and wrote ashley on it, is there a way to punch a whole in it in studio to make a keychain?
@ashleys3dprintshop5 ай бұрын
Hello, great question. Yes you can easily make a hole within studio. You can make a temp one or a permanent one. I here are some links that show the steps. Negative (temp) kzfaq.info/get/bejne/hLp_qKqYnt3Tf4E.html Mesh boolean (Permanent) kzfaq.info/get/bejne/sJqcapiFm9DQmXU.html
@jakemccallum82375 ай бұрын
@@ashleys3dprintshop thanks so much! Learning this program is just simply amazing, you make it easy thank you
@PrintsByLarryStoreАй бұрын
im not sure what im doing wrong, but i followed this video down to the T, and for some reason, my logo wont go down to the 1st layer fully. My image is an SVG, ive assembled/merged the models together, ive adjusted for the thickness through the Z height, etc. I have no idea what im doing wrong, If you have any insight, im all ears lol
@ashleys3dprintshop29 күн бұрын
Hello. Sorry about the late response. Are you adding an SVG to a part, adding text to an SVG, or both to a part?
@indyjons3214 ай бұрын
Can you import an image and have it paint over uneven surfaces?
@ashleys3dprintshop4 ай бұрын
I think this may be helpful. You can take an SVG file and have to wrap around uneven surfaces. m.kzfaq.info/get/bejne/lbtgo9d32p6un2w.html
@bryanreiger90506 ай бұрын
Thanks so much for this, I have a challenge for you that I am trying to figure out myself (if at all possible). Do you think you can wrap an image around a cylindrical .STL file? Or do they all have to be flat for the image to work?
@ashleys3dprintshop6 ай бұрын
Challenge accepted!Lol Interestingly enough have been thinking about this for a bit. So there is a way to add some images to a curved surface. However there is a huge caveat. Full images will not work, or at least I have not found a way to do it. However, line art/outline of an image may work.
@Pitguy7772 ай бұрын
Have you figured it out?:) i could really use this feature. If they could make it as easy as the text shape function it would be amazing. Thank you for the great videos. @ashleys3dprintshop
@achillecalabria-nf6wg10 ай бұрын
my logo needs a backing so its in one piece but i cant get it to work can someone help please
@ashleys3dprintshop10 ай бұрын
I'll try to assist if I can. The backing for your logo are you trying to make a your logo flush or slightly raised in this backing? like this kzfaq.info/get/bejne/f8t1i5mn0OC0ZI0.html For flush You can right click your logo left click "add part" Pick your shape And surround your logo. making sure the z height of the added part is the same.
@amberjackson91672 ай бұрын
Are you using a 4 or a 2 nozzel to print that ?
@ashleys3dprintshop2 ай бұрын
Hello. That particular model was printed with a .4mm nozzle.
@aaronscalise76822 ай бұрын
I have followed this to the T and tried over and over. As soon as I slive, the main object takes over the text and it is no logner visible. I have even tried to paint it again. I am running the latest version of Bambu Studio. Very frustrating.
@ashleys3dprintshop2 ай бұрын
Hello, thanks for reaching out. You are probably running into a somewhat common issues that didn't crop up for in in this video. There is an "order of operations" for assembled/merged parts. Its a simple fix however. You just need to "move" the main part above the text parts in object process. Better explained here. kzfaq.info/get/bejne/et52hMmKz5PGkYE.html
@aaronscalise76822 ай бұрын
@@ashleys3dprintshop Thanks for the reply! I did do this first. After playing with it a little more, I got it to where i could see bits of the text after slicing, but there is no way it would be readable. I closed the proejct and will try to start over when I can find a solution.
@ashleys3dprintshop2 ай бұрын
@@aaronscalise7682 How "thick" in the z axis is your text/image? I recommend at least 2 layers worth. So at a .2mm layer height then the text should be at least .4mm high. Also you mentioned it may not be readable are you making the text small? If so there are a few options. Smaller nozzle, or change line width. Arachne wall generator tries to automatically change the line width but it may not always work. Full topic *Line width* kzfaq.info/get/bejne/gZxdpMuJl7mYeY0.html Actual fix in action on .4mm or .2mm nozzle. kzfaq.info/get/bejne/b7ailqydm53Sp2g.html But if line width is your issue and you are using a .4mm nozzle try changing your line width to .3mm.
@aaronscalise76822 ай бұрын
@@ashleys3dprintshop it was set to .1 but then seemed to have changed itself to 2 on its own
@ashleys3dprintshop2 ай бұрын
@@aaronscalise7682 once the text is embedded into the model just changing the z height may throw off the whole model. Sometimes it's good to right click, separate into objects. Make the z height adjustments, then merge them together again. Just be aware when you separate into objects everything falls to the plate.
@Morcego5385 ай бұрын
How do I had the logo on a tubular our round object?
@ashleys3dprintshop5 ай бұрын
Hello. There are other videos that build up to this one but this should show you the basic steps. kzfaq.info/get/bejne/lbtgo9d32p6un2w.html
@Morcego5385 ай бұрын
Thank you! @@ashleys3dprintshop
@mike2848611 ай бұрын
Having a challenge with this on the text/name portion. Printing a logo in orange and teal and that portion is perfect, colors pop. Below it I have a name in orange also and in a larger font/size than the logo. But the name portion of the print almost comes of “hazy/faded”. Almost as if I’m getting a black layer somewhere that should be orange. Any thoughts on what I may be doing wrong?
@ashleys3dprintshop11 ай бұрын
There are a few ways to look at this. You can repaint the text,(which I will assume you have tried) you could also increase the layer size for just the text. So if your text was .1mm you can try to increase the z height to .2 or .4mm.(turn off uniform scale) This will push the text above "flush" you can use the "move" tool to push back down. It's not explained in this video but it is explained in this one. kzfaq.info/get/bejne/fJ18ZcKDmeCpiH0.html
@mike2848611 ай бұрын
@@ashleys3dprintshop My part thickness until it changes height (starts creating a slot) is .79 mm, so sending it to print now with a text thickness of .65 to see if that solves my issue, feel like it will!
@mike2848611 ай бұрын
That worked perfectly! Thank you for the guidance!
@tonymarreiros3186 Жыл бұрын
My only chalenge now is to get the glue from the plate out of the print. Have you manged to print on the cold plate with no glue? Using PLA. Thanks
@ashleys3dprintshop Жыл бұрын
I should probably do basic overview of what I use but I only used glue stick for the first week I had my printer the washed it off and never looked back. I am a kick starter backer so I've had my printer for a year and over 3300 hrs printed. I used a product called "Nano Polymer" from vision miner($45 for 120ml.) It's little pricy initially but a single bottle has lasted well over a year depending on application. Leaves no tacky residue and I'm still on my original cool plate sticker. I run every print on cool plate settings of 35C on all my plates (cool plate, pei or peo) . I usually print in pla but the vision miner works on nearly everything. @VisionMiner kzfaq.info/get/bejne/gNWJo6xoub-maWg.html (not a sponsor)
@tonymarreiros3186 Жыл бұрын
It would be nice if we could get that in South Africa.LOL@@ashleys3dprintshop
@ashleys3dprintshop Жыл бұрын
@@tonymarreiros3186 I haven't used this brand personally but TH3D Bed Cement is similar and they ship to South Africa and seems less expensive.
@cbgslinger Жыл бұрын
I used Windex as the release agent on my Cool Plate for PLA. I’m still using the original sticker on my Kickstarter printer.
@ashleys3dprintshop Жыл бұрын
@@cbgslinger You are just like me. I don't know why people dunk on the cool plate but I too am still on my original kick starter plate. About 80% of my 3500 hours were on the 😎 plate. You can print pla with the top and door closed. You don't need to crank the chamber fan, and you don't need to heat beyond 35c the bed. Only difference is I haven't tried windex. Lol have you tried the pei, peo or other plates?