@craftedcores Thanks for your comment . I try and hope getting better and better. The cutting I don´t like but it´s part of the "game" :) Happy new Year 2023 - Sandor - DM4DS

@RichardRecupero yes I was and I´m still excited. I use 3D printer for a long time, build my own, modified all others, but this is the first one OOTB printing just fine, without ringing or tweeking again and again the profiles. I had one "probem print" now, but I´m sure it was a slicer problem. Trying to replicate and doing maybe a video if I can. You will enjoy your X1C , I´m sure. Would love to hear your oppionen, after your first prints.

Thanks @TheEdgeofTech . I´m still testing. Different materials like ASA/ABS/PETG/HIPS/PLA/PLA+ and none had bigger problems with the "Generic" profiles, coming with the Bambulab Studio and that at "medium" speeds. Will make a summary after more testing / printing. Merry Christmas to you and your family. Sandor -DM4DS

@@DM4DS Awesome! Merry Christmas!

Merry Christmas to you and your family, too. I´m printing almost non stop and no failures yet. ASA/ABS/PLA/HIPS/PETG looks great. Not tested TPU. I know that it does not work with the AMS. Will post a summary after more testing , printing. greetings Sandor - DM4DS

I know what you are talking about with IDEX :) Enjoy your X1. Happy New Year - Sandor - DM4DS

yes they are. but I´m sure it´s just a matter of time that the copy cat is doing it´s job

Have you checked your status? Maybe you missed the email to pay the printer within 3 days?

I already paid for if, apparently is in transit.

In transit sounds good. Happy printing - Sandor

It's the AMS. If you want print multi material, you should go with the AMS for automatic filament change. For me it's easily worth the extra money.

@@DM4DS cheers this is obvious now. I was thrown off by the selection on the website. There is a X1C combo and then there is an X1C combo + AMS. The difference between the two is around €50. Any idea how these ones differ? They seem to have the same "what's in the box picture"

@@CorpsMedia That´s only in the UK store I think and the only difference is for me: "in stock" or "pre-order" - the parts list etc look the same to me. so maybe you have to pay a few bucks more to get it fast :) But to be sure, write support an email or use the ticket system.

I've just ordered mine, thanks for the help dude. Sub earned!

@@CorpsMedia awesome. give me feedback after your first prints! Enjoy the "next level" :) Big thanks for the sub.

my widest is 70mm and there is plenty of space left on both sides. I´m sure 75mm spools fit. Hope this helpy you. Merry Christmas Sandor - DM4DS

@@DM4DS Thank you! I appreciate it. Merry Christmas to you too!.

Update! I used a 75mm wide spool and it does NOT work! If you "just" print, it works but during filament change, the filament is turned backwards and that does not work. The spool is not spinning while it moves to the side and away from the gummy rollers. greetings Sandor

@@DM4DS Thank you for the update! The spool I am using is from Ninjatek their spools are actually around 73mm. Is there a way to make it work?

@@kbruin79 Don´t think so, there are 2 plastic nubsies, covering a little bit of the roller and that is causing the problem, i think . for me, i have made a small spool winder (in my #shorts from today) to "change" the spool itself of mine too wide spool. maybe that´s a solution for you too. Needs time, but if you are happy with your filament, it´s winding by itself....combine it with and endstop and viola :)

Maybe in the next video :) Happy printing - Sandor - DM4DS