Banter, Injuries and Mistakes - Ceiling Panel Fabrication -- Episode 169

Рет қаралды 10,026

22 күн бұрын

This week we are erasing the last big scar that our boat received from her previous life. Having ceiling panels will bring her interior back from the depths and help her look like a proper yacht.... and a home. Of course we can't get the project done without the typical banter, injuries and mistakes!
Want to support us? Here's a couple ways you can:
🛍DAUNTLESS GEAR:
www.theletteringmachine.com/s...
Like, Follow, and Share!
👍FACEBOOK:
/ svdauntless
🫶INSTAGRAM:
/ svdauntless
DON'T FORGET TO LIKE, SUBSCRIBE & CLICK THAT BELL🔔
If you're feeling generous you can also support us here:
⛵️JOIN THE CREW on Patreon(subscription): / sailingdauntless
🫙Put a tip in the TIP JAR(one time donation): www.paypal.com/paypalme/saili...
Check out our website:
www.sailingdauntless.com
___________________________
Music in this video:
www.epidemicsound.com
____________________________

Пікірлер: 74

@jackjordan7691 13 күн бұрын

It looks wonderful! You all are a joy to watch.

@peggykm4977 13 күн бұрын

Just saw this new release! You are baaaack!!😊

@philipuche6922 12 күн бұрын

Very clean job, well done🎉

@pipercolearchitects 20 күн бұрын

You have been missed

@to5msheppard 17 күн бұрын

Welcome back and that looks beautiful Now. Good job on everything you guys are amazing. The 3-D printer thing. I probably couldn’t even even hook up the printer love your channel. I’m glad you guys are getting there cause it looks really good. The boat looks beautiful.

@Andy_Hunter 20 күн бұрын

Glad to see you guys back online doing some great projects.

@oyou812 15 күн бұрын

It looks awesome 👌

@tracynichols7206 17 күн бұрын

Turned out perfect ! Very professional great you redid the first panel, you would have kicked yourself

@CoryWitte 18 күн бұрын

Love the content! PS thank you again for frying up the Mahi Mahi I caught when we got back to dock with Acali!

@SailingDauntless 17 күн бұрын

Thanks! And you’re welcome, it was delicious!

@craigscoullar564 17 күн бұрын

You guys can fabricate my anything anytime so good to watch you guys as a ream

@MrJerobona 19 күн бұрын

That ceiling looks perfect! Congratulations!

@robbo770 20 күн бұрын

Good to see you guys back on the tube!!

@KC-wc8wn 19 күн бұрын

So happy y’all are back! Have missed y’all

@cals4200 19 күн бұрын

Looks great! Welcome back to the channel.

@nategehl4506 20 күн бұрын

That salon has really come together nicely. It’s starting to look like it was built that way.

@nickcooper14 18 күн бұрын

Looks spectacular, great job family. Ticking the boxes off the list🤟🏼🤟🏼🤟🏼

@user-tj2kf1ed6g 19 күн бұрын

looking good team keep up the great work !!!

@Kirkster131 20 күн бұрын

Ty knocking it out of the park as per usually…

@rickpetrinack1540 20 күн бұрын

Sailing Dauntless family hi from Alberta, Canada ( directly north of Glacier National Park Montana).. The ceiling panels look absolutely amazing, but I've come to expect that quality of wok from you. That kitchen and salon area are outstanding. It's always such a pleasure to watch you work. The correct materials, tools and knowledge to take on a project of this size and complexity. The new ceiling panels are proof of that. Bonus you are a great family to watch the humor and kidding around are awesome. Cant wait for next week. Thanks for including us in your journey.

@SailingDauntless 19 күн бұрын

Thank you for watching and the support!

@pbear6251 20 күн бұрын

Glad to see you back!! I loved the witty banter and I look forward to next week's offering.!!

@dominicglatz4560 20 күн бұрын

Well done guys ,YOU DID IT....she looks amazing.

@dangrady0311 19 күн бұрын

The panels look great! You have been missed!

@docdurdin 20 күн бұрын

Everything is starting to look FAB... This boat is going to mean more to you than any production line could because a part of you is in it, especially Todd's blood.

@peggykm4977 13 күн бұрын

👍🏼

@Jeremy-km4dj 13 күн бұрын

what filament are you using with your 3D print?

@onedisasterattatime9116 19 күн бұрын

loooking gooood

@paratyshow 19 күн бұрын

👍✅🏝Looking great!👏

@SailingDauntless 19 күн бұрын

Thanks 👍

@angelakirchner4811 20 күн бұрын

Love seeing it come together. ❤love seeing your videos more though

@SailingDauntless 19 күн бұрын

Thank you

@rockcityfpv9117 20 күн бұрын

Missed you guys

@johnabriggs6044 20 күн бұрын

Happy to see you back. Missed your video's Salon Looking Great almost ready for a Party 🤩🤩🤩🤩🤩🤩🤩🤩

@nickcooper14 18 күн бұрын

Bloody hell, I get notified a day after you have been out and I checked your page🤣🤣🤣 get back into it guys🤙🏼🤙🏼🤙🏼🇦🇺🇦🇺

@SailingDauntless 17 күн бұрын

Thank you!

@Reegareth 20 күн бұрын

15:30 As someone who is prone to making these kinds of mistakes. I have found that a good practice especially in things that you LITERALLY get one shot at is to fully install this onto a piece of scrap plywood or card board or just anything that you can find that matches the surface somewhat to figure out if you have it right before committing to a permanent installation like this. 😅😁 17:40 Another tip for 3d printing is to print stuff like this on an angle even if it means more ugly supports and difficulty printing it'll make the part much more durable making the layer lines on an angle. That way when you are drilling and side loading those teeth the loading force won't be perfectly in line with a layer line and letting it snap off like that. 👍😁

@SailingDauntless 19 күн бұрын

good tip

@RichardRoger1966 6 күн бұрын

4:09 ... Someone's got a lil bit of an attitude.

@DVanHamlin 20 күн бұрын

We have a saying here at our home: "It's not a home improvement project unless somebody's bleeding." And we are always doing home improvement projects. Starting to buy bandages by the gross! Haha! Good job Dauntless crew. It's coming together nicely.

@SRMWorkshop 20 күн бұрын

Yay a new video! What vinyl did you guys use for the ceiling panels?

@SailingDauntless 19 күн бұрын

its the same that the factory uses, it has a felt backing on it. I can't find the invoice for it but I did purchase it locally in Florida.

@tommussington8330 20 күн бұрын

A paper towel and electrical tape my go to for band aid too!

@greatpix 20 күн бұрын

Thumbs up on the ceiling panels.

@6MISFITZ 20 күн бұрын

Ceiling absolutely looks amazing. Time to give your video editor a rai$e per episode

@geniksonthego8963 20 күн бұрын

That looks amazing guys! Hey, are you planning on attending Annapolis again this year? If so, i would love to meet up and chat about your refit.

@SailingDauntless 19 күн бұрын

Possibly!

@frederickreinking6655 20 күн бұрын

I missed you guys! How is the energy consumption of the Air conditioning units?

@SailingDauntless 20 күн бұрын

Pretty good so far. We will be putting energy meters on and reporting back.

@frederickreinking6655 20 күн бұрын

Thanks! I'm sure you both are happy with your daughter's help.

@johnwarren7155 16 күн бұрын

Almost as beautiful as you pretty lady.

@guydavis4796 17 күн бұрын

So does sid have a significant other just asking I know a guy !

@ChrisHarding-lk3jj 20 күн бұрын

I absolutely would not use 3m rattle can adhesive. You should have purchased a gallon of glue from an upholstery supply along with a $18 harbor freight paint gun. With the real upholstery adhesive you can let the adhesive completely set before applying the vinyl to the substrate and they you use a steamer to reactive the adhesive as you work everything into place. The easy way to make replacement ceiling panels would have been to get the cad drawings of the roof panels from Leopard/Robertson & Cane and cut out new panels in minutes using a cnc router.and a gerber textile cutter to precut the vinyl.

@geoffendersby9302 20 күн бұрын

When does the sailing happen?

@SailingDauntless 20 күн бұрын

When the fixing is done happening 😉

@outcountingstars 20 күн бұрын

Great video, as always! We have a Leopard 45 with just Velcro on the ceiling panels… can you share the link for the vendor of the clips? Also, I assume you used Southco locking latches? Was there a specific vendor there you’d recommend? Love your videos!

@SailingDauntless 20 күн бұрын

Thank you! The clips are from fastmount and yes the latches are from southco but we purchased them from another owner so unfortunately I don’t have a vendor recommendation.

@tommussington8330 20 күн бұрын

check McMaster Carr part # 4921N11

@chrisparent1142 20 күн бұрын

Curious what 3d printer you use and if you have written a blog or post about it and the materials you have found best to use in a marine environment?

@SailingDauntless 19 күн бұрын

I have a Bambu X1 Carbon. I use PLA for most interior and ASA for exterior. Keeping them dry is the key. I may do an episode in the future on it, it is very easy to use the printer, the steep learning curve is 3d modeling software. For that I use Fusion 360, they have a free personal use version.

@chrisparent1142 18 күн бұрын

@@SailingDauntless thank you for your reply

@nortonmolly 18 күн бұрын

Where did you buy the ceiling panel clips / studs? What is the company called that makes them?

@SailingDauntless 17 күн бұрын

Fastmount

@crashgilliam5983 19 күн бұрын

Where did you get the clips you used?

@SailingDauntless 19 күн бұрын

various online retailers. Fastmount is the brand

@bruceg7387 19 күн бұрын

What no led lighting?

@SailingDauntless 17 күн бұрын

It’s daytime, we put the lights in in a previous episode

@gbsailing9436 20 күн бұрын

I know this boat WAS wrecked, but that was years ago now. Are you ever going to sail it?

@SailingDauntless 19 күн бұрын

absolutely, when its ready

@rickhudson6890 20 күн бұрын

No more holes in Kim's boat.....OK?

@richardgnista 18 күн бұрын

Like to ask. What exactly does an American flag with a red stripe mean? Is that being disrespectful? Just like to know because I support democracy. You have it visible, so I would think you have a reason. Thanks

@SailingDauntless 17 күн бұрын

It represents patriotism and support for firefighters.

@johnnydooley7967 16 күн бұрын

The USA is not a democracy it is a Republic