Basic operation of the menu elements in Pulsar thermal devices

Рет қаралды 60,663

Күн бұрын

Tips on basic menu navigation and operation in Pulsar thermal devices. Features operation instruction on Pulsar Thermion 2 XP50 however this will also be beneficial to most Pulsar thermal device operation as they are all pretty similar to navigate. 1st in a series of basic operational videos.

Пікірлер: 31

@grimaulkin 2 күн бұрын

Thank you. I have been looking at videos to learn about the Pulsar I just bought and this is the best and most helpful video I have seen.

@chilichad 2 жыл бұрын

Appreciate you taking the time to explain these thermal scopes.

@foxoptic5887 Жыл бұрын

Thank you very much for watching.

@gregorygraham2747 Жыл бұрын

This guy has a load of knowledge!

@PeakyBlinder 2 жыл бұрын

I'm am surprised that you haven't had hundreds of views, This vid is absolutely brillient. So much information Subscribed and saving all your xp vids, Thank you. From the UK.

@foxoptic5887 Жыл бұрын

Thanks for watching

@JamesSmith-dt3yf Жыл бұрын

Brilliant explanations. Looking forward to watching the series (UK)

@foxoptic5887 Жыл бұрын

Thanks for watching

@mr.rem2609 Жыл бұрын

What a great video, thank you so much!

@oO2Pro4UOo 3 жыл бұрын

You are a very awake person. I like you and your review aswell. Thank you, i definetly got a better understanding of the operations in general :). Would love to see the Thermion 2 review in the future.

@foxoptic5887 Жыл бұрын

Thanks for the comments and suggestions. Really appreciate you watching our videos.

@user-tk5kq9uj3t 7 ай бұрын

Great video! Thanks.

@petermiller8634 2 жыл бұрын

Very helpful & clearly explained video. Thank you.

@foxoptic5887 Жыл бұрын

Thank you very much for taking the time to leave a message and thanks for watching.

@larrypace7971 2 жыл бұрын

Awesome video, thanks for the information

@foxoptic5887 Жыл бұрын

Thanks for watching

@charliehiatt1132 2 жыл бұрын

Great video!! Thank you sir

@foxoptic5887 Жыл бұрын

Thanks for watching

@ianfosterUSA Жыл бұрын

Brilliant thanks from the UK

@ronaldcarlson1211 Жыл бұрын

Hi THANK YOU FOR THE IMFORMATION!! New to the thermal world have 2 pulsars.. What bipod are you using? I have a bog and just not tall enough

@PeakyBlinder 2 жыл бұрын

Great vid, What's the difference between the xp38 and xp50 is it just the size.

@foxoptic5887 Жыл бұрын

Fecal length. This determines FOV more than anything. The XP38 has wider FOV vs the XP50, however, the XP50 has more magnification and therefore longer ID range.

@winkiiiie 5 ай бұрын

What is the calibration do?

@braydencoleman1043 Жыл бұрын

hey i bought this a few days ago and i cant get it to show this much detail as your scope does

@foxoptic5887 Жыл бұрын

Feel free to contact me if you need some help. 877 806 2977 Travis Fox

@adl2005 2 жыл бұрын

i keep getting vertical lines on mine, any ideas why.

@foxoptic5887 2 жыл бұрын

Most likely it needs calibrated(NUC) do short press and release on the power button. If you have additional questions or need help feel free to contact me directly. 660 341 9370

@leif707 Жыл бұрын

how do you get the image to be focused? mines out of focus

@foxoptic5887 Жыл бұрын

Adjust diopter focus to the display with the focus at the rear of the scope (eyepiece) after that adjust focus for the correct distance to target by adjusting the focus ring on the objective lens end of the scope. The clearest image will always occur at the lowest magnification with digital devices. It also helps to properly adjust contrast and brightness. I recommend starting with brightness at 10 and adjusting contrast both above and below this value until you see the number you prefer. (This will give you an idea of the "span" between brightness and contrast. Once you know what looks best you can adjust them together to raise or lower overall brightness. If you have questions, you can call me anytime 660 341 9370

@kinardoutdoortv873 Жыл бұрын

How to turn the menu off

@foxoptic5887 Жыл бұрын

Long encoder button press opens and closes most main menu functions. Short press to open the quick menu and it times out after 3 seconds on its own. The main menu will time out and close on its own after 5 seconds from all options except zeroing and dead pixel correction. (These require long press to save and exit. ) Call me if you need help 877 806 2977