@frankdudefrank The silver press is awesome btw!

@frankdudefrank We are using the Ryonet Silver Press!

I am sorry that this happend and I apologize for the concern this has caused but I can assure you that the element will work just fine and the damage that you are seeing is not cause for alarm.

Ryan, I got this dryer from you and im putting it together now, i noticed some of the black on the heating element had rubbed off, like scraped off soot, in shipping and the silver is showing through, is this an issue or danger i should figure out before i use it?

Time is not nearly as important as temp. I usually advise people to cure to about 340 so that they can be sure that the ink has hit 320 and maintained that temp long enough to cure.

Settings have you got this on for curing plastisol?

What press are you printing shirts with in this video?

Hi Ryan. I noticed you're not flashing the colors before you switch to a different color screen. Is it ok to just get the ink on the bottom of the screens? Im flashing them in-between each color. Should I not be? Thanks!!

Yes

Love my little buddy, its the S#!%!!!

sir how mane prise. sir I'm in ksa

replacement belts?

What are the heater dimensions? Thank You

Lets talk about bbc.....no thank you