Beater Bike Build - Fuji Track 2001

Рет қаралды 25,832

3 ай бұрын

The beater bike fixed gear grocery getter, Fuji Track 2001! Finally got all the parts for my next go-to bike to get around town on. Front rack basket, swept back bars, comfy upright position, dings, scratches, rust and all the good stuff! Absolutely love the colour on this frameset and how its all turned out, let me know what you guys think! Bike specs in the link below :)
Specs: www.waveywheelies.com/fuji-tr...
Stickers and T-Shirts: www.waveywheelies.com/store
WaveyWheelies
Music: Prod. by KingEF (end song)

Пікірлер: 94

@Claymore2007 3 ай бұрын

"Beater grocery getter" with NJS sugino 75s LOL. Gotta admit I'm jealous.

@donttouchthisatall 3 ай бұрын

My thoughts exactly :D

@authorXS 2 ай бұрын

yeah same, this beater build is more dope than my high end bike

@ryannimmert7059 3 ай бұрын

what i love about this channel is you get straight to the point. no fluff, heres what im doing today and this is how i did it. love it

@C345OFR 3 ай бұрын

Gatt dayum, that BB is smoooth! I've seen a lot of modern builds where the cranks are spun and folks get barely 10 full revs but yours just kept spinning and spinning! DO WANT 😀 .

@toddsmithselbow1732 2 ай бұрын

Love that frame for whatever reason. Just reminds me of when I started riding fixed around 2008, and I'd always find Feather, IRO and Bianchis on craigslist lol. That's probably the only Fuji Feather I'd ride.

@dncsmedia 10 күн бұрын

I love it. I wasn't too sure about the bars until it all came together. Beautiful. Great work, on bike and video!

@nikinoev 3 ай бұрын

Love the build! Like you mentioned, I'd raise the stem just a little and angle the handlebars down a bit. I'd keep the Nitto stem, the Cinelli looks too .. crazy. If you're gonna be riding more upright, consider a saddle with more cush - that Flite is way too sporty, IMHO. In the next video, I'd love to see a close-up shot of a drop of Loctite Blue on the Izumi halflink chain bolt ;) Cheers from the Netherlands and keep'em coming!

@waveywheelies 3 ай бұрын

Cheers man! Yeah I usually do a few adjustments after the first few rides to tune it in. Have lowered the bars a bit and it’s pretty comfy now. Do agree about the saddle but I couldn’t not put this on, just love the look of them too much, and felt like this red one was destined for this frame haha. I don’t usually use loctite, haven’t had any issues on my super toughness master links yet but thanks for the tip 🙏

@eliroberts9362 3 ай бұрын

i too, have a 300$ crankset on my beater bike XD. great build

@ilowmein 3 ай бұрын

Yet another banger 💥 So sick to see all the different style builds. Choice grips on the cruiser bars goes hard too

@waveywheelies 3 ай бұрын

Cheers man! Some of my favourite grips for sure

@marlerr__4235 2 ай бұрын

It feels surreal that this frame was once racing in the velodrome now chilling in the streets

@_xnk7257 3 ай бұрын

Always a good day when there is a wavey wheelies vid to watch

@paulcalderon4517 3 ай бұрын

I don’t know anything about bicycles but I’m glad I got this in my recommended. The music and the videography were great. I also love that colorway on the frame.

@nedea 3 ай бұрын

Ah, just what I needed, some bike meditation build from WW. Looks like a really fun bike to ride!

@jacobatherton8339 3 ай бұрын

That chain sounds goooood

@tensiondechaine 3 ай бұрын

I just love that! Planning on doing exactly this on my Vigo 2022 😎😎

@waveywheelies 3 ай бұрын

Nice👌 I want to see that!

@MinTieS. 3 ай бұрын

Love it bro. Keep it up.

@waveywheelies 3 ай бұрын

Thanks man🙏

@albertsht 3 ай бұрын

super nice mate! Altthough its a beater bike i feel like the decals/frame paint will make u fast af! I also just build up my new beater! A red KHS Flite 100 from 2006, super sick with rust and paint chips as well!!

@waveywheelies 3 ай бұрын

cheers man!! that sounds like a sweet build you’ve got there, those frames are rad!

@Willdlans 3 ай бұрын

its a clean build and not over done what more could ask for.

@ThePilule911 3 ай бұрын

WOW making a wheelie with a fixed gear, you really can wheelie anything!! Great build

@waveywheelies 3 ай бұрын

Haha cheers! Took a while to learn but loads of fun once you get the hang of it!

@oliwier.gawlik 3 ай бұрын

i was smiling the whole video

@mmcd-qp8oh 3 ай бұрын

one of my favorites you have built 👏

@robinindahood3266 3 ай бұрын

Like the paintjob, the basket and love the seat.. Great build 🎉

@waveywheelies 3 ай бұрын

Cheers✌️

@MrBelongings 3 ай бұрын

This was great to watch

@waveywheelies 3 ай бұрын

Glad you enjoyed🙏

@steadfast__ 3 ай бұрын

Nice build! Now i’m going to go look for a beater! Ride Safe!

@ashhill308 3 ай бұрын

another great build! needs a long-boy stem with those bars 😉

@FIXIELATED 3 ай бұрын

Bro I've been waiting for months for u to upload thank you 🎉

@waveywheelies 3 ай бұрын

No worries! Hope you enjoy✌️

@FIXIELATED 3 ай бұрын

I enjoooyed it, keep goin

@monophonoise4548 3 ай бұрын

Man i love this one

@waveywheelies 3 ай бұрын

💛

@woodenswordsword118 3 ай бұрын

Love you master chain link😁😁

@guyincognito1136 3 ай бұрын

Im going to build a grocery getter beater, I’m also going to install a $700 drivetrain on it. Haha

@stingerstv4434 3 ай бұрын

nice and clean build

@waveywheelies 3 ай бұрын

thanks!🫡

@tommatsuura922 3 ай бұрын

Great video as always! Might not be your taste, but I really wanna see your Fuji Feather build!

@chrisball8178 3 ай бұрын

Love that 🤘

@blackrock2222 3 ай бұрын

Just perfect

@waveywheelies 3 ай бұрын

🙏

@oreocarlton3343 2 ай бұрын

Very tastefull build, no poseur parts

@riskyrax 3 ай бұрын

Awesome. Think it might be the favorite yet haha. Built a similar setup years ago with a 1974 Huffy (made in Japan) frame that has some soma osprey bars. Gotta compensate for the sweep back so I say stretch it out with that Cinelli stem !

@waveywheelies 3 ай бұрын

Cheers! That sounds like a sweet build! I’m loving the swept back bars so far, the Cinelli stem is very tempting..

@kipcc3918 3 ай бұрын

Man. i wish my parts bin go as deep as yours. Sugino’s. Nittos, Gran compe and flite saddle. Thats a pretty expensive beater if you ask me.

@jjjtung 3 ай бұрын

wish I had those bars!

@blkhlb 3 ай бұрын

cool i like it

@nivek29 3 ай бұрын

hey! I have a Fuji Track (2018) and a cat who looks just like that one, only chubbier. : )

@waveywheelies 3 ай бұрын

Hah that awesome! They are the best workshop friends😊

@JogieGlenMait16 3 ай бұрын

The crankset is worth more than the rest of the bike.

@PortfolioAndikaFebriana 3 ай бұрын

Burn bro 🔥🔥🌾

@louieheron3525 3 ай бұрын

🔥🔥🔥🔥🔥🔥🔥

@waveywheelies 3 ай бұрын

🙏

@u1y55e 3 ай бұрын

how's riding brakeless and fixed with stuff in the basket going for you? I feel like I'd be losing balance all the time

@waveywheelies 3 ай бұрын

It’s interesting for sure, takes a few rides to get used too. Haven’t ridden with a really heavy load yet but will have to update you on that!

@event4216 3 ай бұрын

Interesting that 2001 fork is unicrown like on current Fujis while it had a cast crown in years between. Nice color scheme from years when bikes had fun included right from store.

@waveywheelies 3 ай бұрын

Yeah very true, I didn’t think about that.. I’m not the biggest unicrown fan but I don’t mind it on this build! Maybe it was just a cost thing? Not sure..

@robdogracing 3 ай бұрын

Sick build! I would just put caps on or flush cut the bolts that clamp the basket to the handlebars so nothings gets accidentally caught.

@waveywheelies 3 ай бұрын

Cheers! Yeah that’s not a bad call actually, I might have to do that now 👌

@T_track 3 ай бұрын

Curious why the 1 skid patch ratio 🤔 but amazing beater bike build

@waveywheelies 3 ай бұрын

Good question, I didn’t have a 17t cog for it so just went with the 16t I had, will most likely swap out to a 17t on it soon though.. not a fan of the 1 skid patch either haha

@user-vu2mg5ck6x 3 ай бұрын

очень красивая сборка

@ptshprshap9768 3 ай бұрын

"I've been pretty damn excited excited about this build for a while" makes me curious. How many builds do you have going on / planned at once? Thanks for the video :)

@waveywheelies 3 ай бұрын

Usually around a handful, I occasionally pick up a frame and slowly accumulate parts for it over the course of months sometimes years haha

@hugomundo4826 3 ай бұрын

SIIIIIIICK

@waveywheelies 3 ай бұрын

❤️💛

@shaori1469 3 ай бұрын

gantong ganto yung binubuo ko frame ngayon shet kulang lang ako ng components pero eto yung nasa isip ko matagal na wala lang talaga ako pera. Kuhang kuha nya yung build na gusto ko 😢

@lancehernandez4389 3 ай бұрын

❤

@waveywheelies 3 ай бұрын

💛

@andrewstiff494 3 ай бұрын

😮

@offanichols97 3 ай бұрын

what u think about tsunami frames??

@C_Wheeler00 3 ай бұрын

Do you keep all of your builds up or do you take them down after a couple rides

@waveywheelies 3 ай бұрын

Keep most of them but I have sold a few over the years and a couple have been stripped back down, only got so much space and can only ride so many

@isaiahwinans1924 3 ай бұрын

I've always wondered what you do with your builds? Are these for customers? Or do you flip em? Also, what's been your favorite build so far?!

@waveywheelies 3 ай бұрын

Majority of them are for me, with the exception of a few that I’ve built for friends and other people. Favourite is a hard one.. the 650b steamroller was a really fun one to build and ride off-road, my gazzetta is my most ridden one everyday around town vice, the mash reyes is my favourite for tricks and the 2015 histogram for the aggressive angle, speed and stiffness. But I love them all differently 😊