"Roughly the same cost" lmao

are you making satire?

Soo cool I love it

Do the opposite of him and put the level into the opening and mark the right side of the level.

Carpet yes. Wood flooring you should cut the high side of jam so both jambs are touching floor

He still addressed it tho

Your going to love them!!!

Cap😂

If you install doors often, your going to absolutely love this system. Thanks for watching.

No kidding!

Rich Williams no problem with these at 3:00 into the video you can see the averaging of corners out for out of plane walls. The same technique works if you need to shift the entire frame into or out of the wall to average the jamb in the wall. Instead of just doing 2 or so corners you will be doing all bracket locations.

He used a spacer to account for the future floor install. A spacer is the se thickness throughout. A shim increases in thickness.

3:27. Not for flooring.

You still want to shim the screw connection behind the hinge, it would flex too much without

Which should be more than enough, especially after trim is nailed both into the jamb and the wall... They used to "case hang" doors using only the trim nails

@@kentsimpson8804 and I have gotten a lot of jobs re-hanging them

J M Yes , you can install it perfectly with this.

No it doesn't, the point of aligning each bracket to that level line is to ensure that the frame in secured in a non-twisted way

scott- o if you use a long hinge screw the power of the screw can “suck” the jamb/frame into the wall if you tighten to much. Throwing a shim behind there first simply stops this from happening.

The quick door hanger is only available at Home Depot.

Only available at Home Depot.

You could probably find something similar on Amazon for cheaper. Home depot is dead to me lol

@@andresst17 why lol what happened?

@@Zack16Fair i don't know about other areas but the home depots in the stl area suck. Amazon just has cheaper items without the hassle.

Chris Salinas take the nut off the door plug before installing. Then take out plug after.

The door is the plug.

Contact benjefferson53@gmail.com and +1 623 295 9776 on wattapp he use to work for YKK AP America inc. Product line Vinyl windows and sliding patio doors; metal curtain wall, storefronts and entrances; sun control products including sunshades, grilles and louvres; glass window walls, architectural windows and balcony doors. repairs , installation and sales of quality doors

On hollow-core doors, nothing else is needed. On heavy/Solid-core doors we recommend removing the center screw from each hinge and replacing with a longer screw that will go through the hinge, through the bracket's clearance hole, and into the wall. This is a common practice that most builders will do on any door install wether hollow or solid core. (its recommended you put a shim behind the hinge when you do this, to keep the jamb/frame from getting sucked into the wall by the screws). Remember all the hard work of getting the door perfect will already be done by the brackets, you are simply taking 1 extra minute to reinforce your install.

@@Crazybuilder98 Ok this is a good idea. Thank you

How'd you make out Dad?

Leave extra time, replace everything if you're already in there (toilet running? Replace water line, flap at the bottom and the mechanism. Don't try to save cheap parts if they're clearly not working. If anyone has to go to the bathroom, might as well do that before you shut the water off. Because once you do that and pull the water line, whatever's in the tank will be on the floor. Also, often worth the monely to have a licensed worker show you how. They often have faster ways. Worst one I tried so far is the kitchen faucet. Trying to crank it on when you can't get to it (it's behind the sink), made my back hurt 3 days. Never fool with old stuff if you don't know what it is. Lead is a big one. Especially since you have kids around. Won't hurt adults over 25 as much. Houses built before 1978 in US are assumed to have lead in paint. You'll find asbestos in very old linoleum flooring. Don't mess with it until you know what it is. Get it tested. And don't assume if it doesn't have it, it's safe to breathe. It's not. Keep it damp (keeps dust down; also NEVER FORGET--ALL dust is flammable! Keep it away from sparks and flame, even pilot lights for stove/furnace and water heater. You can shut those off.) and use full respirator and haz mat suit so you don't track it all over, whatever it is. Cement/mortar is full of glass bits. Mix it outside, gently, and don't bring clothing into the house (tyvek suit/respirator again) or buy premix. Keep lid shut when you have some out. It'll crack if it's dry and you can't just re-wet it. Library has the old Time Life home repair books, too. Some things might have changed (building codes) but library should have newer editions. You can request and have it sent to any branch. Never take advice from people who don't have a license. Lots of licensed guys like side jobs for cash. Just get a receipt for taxes. And you meant moolah/moola, btw.

Found it after second walk up and down door isle on side , thanks anyway

That is incorrect. His name is spelled Jeffrey Epstein.

​Jeffery Epstien's name is Jeffery Epstiens. What part of that don't you understand? No one asked about Jeffrey.

Hi Ken, we have 1000s of reviews (can be seen on homedepot.com) from DIYs as well as pro builders. We have found a person of nearly any skill can properly install a door with this system. Thanks for posting.

Quick Door Hanger (Official Channel) ok best to you. It certainly won’t affect my business. It’s nice tool, but door installation is far more than this.

I just used it. And I am not good at hanging door frames. But this way was much easier.

@@doortech2004 cool story bro, not really sure why you keep commenting then.

I like to kik doors

Buy an extremely strong door please!!!!! It's fun to watch idiots FAIL.

Reinforce the door jamb with heavy wood or make the door swing out.

anthony james lolll

The title *IS* "How to install," *not* "How to hang."

Split-jamb doors are only available in roughly 30% of the country, mostly east coast (and most builders/homeowners don't prefer them because they have cheap looking trim/casing). For all the rest, Flat-Jambs (such as the example in this video) are the only types of doors available.

SEELEYJP dde w

Quick Door Hanger (Official Channel) spzspppp

😂☄️💥

Because you found the man attractive.

That exact issue can be seen at 2:43 seconds into the video. You basically have the ability to average corners in/out of the wall as needed to accomodate Out-of-Plane. Thanks for your question.

Plumb*

The only issue i see is your doors will bind if you dont shim behind hinges and give space and a reveal. you want an even reveal around all three sides. Other than that this looks like a great product i will have to try and see for myself

And you are you installing the doors before tape, texture, and paint? I see a lot of trade damage.

LOL, Its a fake wall built in a studio for demonstration purposes, we felt actually mudding was a little overkill. But thank you for pointing it out, that could be confusing for some DIYs.

Ri >÷8822190/00000

​@@Thequickdoorhanger That seems silly. Lots of people would let you use their real house interior to get help hanging a door.

L7

NEVER only use 16 gauge nails to install a door.

O0f

@@Thequickdoorhanger why

Rough openings in my house are about 80” from the floor. That’s 6.66666667 ft.

If you case the door out, then use that as your installation guide, you would very often get a door that swings shut/open on its own because your relying on the wall being perfectly plumb, which is very often not the case. With this you can see you get the door perfect, then adjust for bad walls (can be seen at 2:43 into the video). This gets your door absolutely perfect, then you can finish with the trimming. Hope this answered your question. Thanks

Corporations shouldn't be supporting any politicians, since you wanna bring politics into this.

Wow, your love for your fellow man breweth over. You definitely have never heard of a man called Jesus.

I work at Lowe's. It is full of Republicans and Democrats workers and customers. They just want your $$$ and care less about a person's political choices.

Thanks! Now I know to take my $$ to Home Depot.

@@rickvaughn9919 Lowe's new CEO came from HD. All major corporations only care about the bottom line. Spend your money at local mom and pop stores where they know YOU not your bank account.