How to Frame a New, Internal Door

Рет қаралды 185,867

Күн бұрын

Sometimes remodelling requires new openings and new doors.
Proper DIY Patreon Page: / properdiy
🧰 The tools and equipment I use: www.amazon.co.uk/shop/properdiy
The Amazon links above are affiliate links. It doesn't cost you anything to click on them but I do earn a small commission if you do. As an Amazon Associate I earn from qualifying purchases.

Пікірлер: 194

@andymartin86 2 ай бұрын

There should be a video like this every Sunday. Its almost a part of weekly life now watching DIY on a Sunday morning

@Crazy_Dave 2 ай бұрын

I couldn't agree more. 👍

@tomalex4806 2 ай бұрын

D&j projects post their videos on Sunday's at 12 and Wednesday's

@ericpetteway3841 Ай бұрын

I used to watch this old house on Sunday, this will be a nice substitute/ addition

@JsR-7and9 2 ай бұрын

I use the magnet trick as well but instead of just rubbing the magnet on the wall surface I put a piece of greaseproof paper between it and the wall to avoid marking the wall. I HATE PAINTING. Love your videos - practical and great presentation.

@samrix5793 2 ай бұрын

What did you end up doing with the electrical in the end?

@ramsaysg 2 ай бұрын

The socket magically disappeared 😉

@Mr-To-Do-List 2 ай бұрын

Yeah and the lead as well

@cainjake7940 2 ай бұрын

Either Stuart moved it over or he just removed it and put the cable in a box

@samrix5793 2 ай бұрын

I like the Sunday morning start times

@andyc972 2 ай бұрын

This is peak Proper DIY, great quality content, a little humour, top tips, relevant safety advice all resulting in a great end result that enables others to feel confident attempting the same project ! Cheers, Stuart !

@stuartbromley3513 Ай бұрын

This bloke is great. Really good stuff. Doing a great service for UK DIYers

@1A9lis 2 ай бұрын

Excellent work sir. We’ve come a long way with the art of fitting doors , thanks to the development of power tools . Harkening back to when I started work back in the late 60s , it was a regular sight to see a joiner fit a door with the add of a hand axe. Only doing the final fitting with a hand plane . I’d don’t know it makes me sounds like I was born in the Victorian era . 😂. Kind regards as always 👍

@olson.pamela 2 ай бұрын

Enjoyed the way Stuart can do these projects so elegantly. I would have smashed out the entire wall of sheetrock. I do have some vintage solid oak doors I am going to be hanging. I'll need to create new door frames because the old frames are flimsy mahogany veneer. The doors weigh a good 40 lbs. In the US they do not sell separate door frames or linings. So I will have to make my own. I have done this once before and did an ok job. My prior experience was hanging doors on my chicken coop. ugh those doors were hung very amateur. I learned a lot doing that. The chickens didn't comment.

@harisfrq 2 ай бұрын

Thank you Stuart , the timing of this video could not be better! I needed just this

@scotty6648 2 ай бұрын

What happened to the socket. Would be nice to know 😮

@jamiefors5062 Ай бұрын

Have a guess ?

@trig 2 ай бұрын

Pro trick: Turn of the power at the breaker when ever working on a wall with power sockets in it. Remove the double socket cover and you can see if the feed cables go up, down and regrettably sometimes left or right.

@Candisa 2 ай бұрын

That doesn't say anything really. In fact, whenever I put a socket or a switch in a hollow wall, I bring the cables in the box from the opposite side of where they are coming from so there's a little loop of extra cable in the wall without it running all too sloppy. Why? If for whatever reason the cable in the box needs to be cut back because of damage, and that leaves me with less slack that I'm comfortable with in the box, I can take out the box and flip it around to pull that extra bit of wiring through without having to find some extra length to push/pull through further along the way, moving the box up/down, making a connection, or replacing the entire length of cabling.

@naebadyersel 2 ай бұрын

Thanks stuart but a bit dissapointed. Normally your videos are so very detailed and step by step, i feel this video was a bit rushed and you missed a good bit ie. the electrical sockets relocation, the door jams install and the architrave installation. We all love your videos and happy to wait so no need to rush, big fan :)

@cliffcarlo180 2 ай бұрын

Morning Stuart At 16:24, I observed that you had used some temporary blocks to prevent the door from falling while levelling it in the frame. It would be helpful to mention this step to your viewers so that they don't overlook it and end up with the door falling out of the frame, damaging either the door or nearby furniture.

@terrytopliss9506 2 ай бұрын

Great video Stuart,plenty of information and tips and some humour. Thanks for the video.👍👍

@bogsdolics 2 ай бұрын

Hi Stuart another great video, I was told by a joiner, put three parts of the barrel of the hinge on the frame and the two on the door to help stop squeaking later on, keep up the good work, G.

@markhannan4712 2 ай бұрын

You can get internal door casings with the rebate cut into them but not as easy to fit as a door lining . Love your videos

@johnm3413 2 ай бұрын

Routing those hinges rebates without a jig. Skilz Stuart! Great video. ❤ Only extra tip would be to place the fixing screws so they are covered by the door stops.

@RhinstoneSouron 2 ай бұрын

Perfect timing! I've bought some new doors and need to alter the door casing to fit the smaller doors.

@greenjedi8 2 ай бұрын

So what happened to the electric cables?

@siaddersl2936 2 ай бұрын

Been watching your videos for some time now, just subscribed and as others have mentioned great timing, this week I will mainly be building a doorway into an existing wall 😊😊😊

@StrawbyteWorkshop 2 ай бұрын

Great video. I've had to move a door and followed a very similar approach, retaining the door rather than salvaging the lining and trying to patch and fill. Cheers. K.

@wez2251 2 ай бұрын

This is really interesting, loads of info ,I feel like I could tackle this project after watching this , a part 2 would be nice, see the finished product.

@williambelford9661 2 ай бұрын

This video came at just the right time - moving my bedroom door is my next project, I now have a good idea of what I need to do and in what order things need doing 👍🏻👍🏻 Only thing I'd do differently would have been to take the faceplate off of the patress box to see where the cables ran.

@BrodaPaul 2 ай бұрын

Brilliant video stu. Really enjoyed it. Keep up the good work.

@yakostudios5405 2 ай бұрын

The quality of this content is just outstanding! May we be blessed with many years of it!

@douglasgilzean9801 Ай бұрын

As an ex joiner, when I was an apprentice I use to pencil a hatch sign on the side of the door where I wanted the ball of the hinge. That way I made sure I didn’t cut out for the hinges on the wrong side.

@harddriven1344 2 ай бұрын

Another top notch video Stuart.

@LemiKillmister. 2 ай бұрын

8:25 😂😂😂. Great video as always, Stuart.

@bradleytuckwell4881 2 ай бұрын

That was a great idea cutting small pieces of drywall to eliminate mess. Job well done thanks for sharing it was great content

@garulusglandarius6126 2 ай бұрын

Excellent as always Stuart, thank you 👍

@HammerDrew 2 ай бұрын

You couldn't have timed this video any better, thanks 👍🏻👍🏻

@RB-xg2vz 2 ай бұрын

As soon as I hit 40 I wake up at 7am religiously whilst rest of house is fast asleep even at weekends 😂 so this is “me time” ❤❤❤

@pigeonlove 2 ай бұрын

So how does that work, do you sleep an hour earlier or is everyone else on their phones? Sleep is important, too

@RB-xg2vz 2 ай бұрын

@@pigeonlove they are all fast asleep, I’m wide awake no matter what time I go to bed night before. So DIY KZfaq = Sunday morning

@markshaz8691 2 ай бұрын

As easy as you made this look, this would put me out of my comfort zone.

@olliekearsey4273 2 ай бұрын

Great video, came just in time I have 3 doors to fit. Keep the videos coming 👍🏻

@Crazy_Dave 2 ай бұрын

Stuart, your video's are top notch and perfectly edited with clear and thorough explanation of what you're doing, they're excellent for learning from with truly trustworthy content. Well done sire.

@topgazza 2 ай бұрын

Really informative and entertaining. The perfect mix

@SRTPN 2 ай бұрын

7:14 - a little nod to Charlie Diyte? 😁

@andreashenning7094 2 ай бұрын

Exactly my thought as well!

@stevethorndale231 2 ай бұрын

Great job as always, I have a recommendation for you. When using a router for door hinges, the job can be made easier with a trend corner chisel. I bought one a while back, so good😊

@genty1960 2 ай бұрын

I know this video was about making the door opening but it would have been nice to detail what you did with the wiring for the socket that was in the way thank you

@craigbuckley4832 2 ай бұрын

Brilliant video, I've learned alot from your videos, very clear and easy to understand. Many thanks 💯👍👍

@AndrewKenmare 2 ай бұрын

Another great video Stuart.... You really are the top man 👌

@Bari_Khan_CEng_CMarEng 2 ай бұрын

I believe the bosch wall scanner takes you to touch the wall with your other hand as it uses your hand touching the tool as well in its capacitance sensor. And, your tool* could also be knackered as well.

@aldoventura4032 Ай бұрын

Well done Mr.

@patpending8134 2 ай бұрын

06:28 What happened with the double socket and wiring?

@anonitachi7488 2 ай бұрын

Awesome Stuart. Your vids are top shelf. Thanks as akways

@scooo0ooobz715 2 ай бұрын

Great video as always and explained easy for the novice and pro 👍

@EscapeTheMatrix...... 2 ай бұрын

Excellent video and tutorial! Cheers! 👍

@LarsFars-ck2qo Ай бұрын

Just what I'm looking for. Great details

@simonmiddleton4977 2 ай бұрын

Nice job as always, thanks for the new content! 👍😃

@artursmihelsons415 2 ай бұрын

Excellent video as always! 👍 Your detector get crazy for one reason - it picked up static discharge from sliding it near surface.. Some wall materials do that.. To avoid this, hold detector with one hand, but other hands palm You need to put on wall under test, usually, it will be 5-50cm from detector in that test zone.. Try not to lift hand from wall..

@Stormin_Mike 2 ай бұрын

Magical door stops appeared not mentioned?

@TheWardagh 2 ай бұрын

Great job and really well explained

@terrywalker4733 2 ай бұрын

Hi Stuart, informative Video and enjoyable, it would be nice to see a follow up video completing the job etc.

@davidmiller4078 Ай бұрын

Nice work amigo you present the tasks well cheers

@michaelplays2449 2 ай бұрын

Great video Stuart !!!!! thank you

@markirish7599 2 ай бұрын

Brilliant. Proper DIY 👍😎

@awantamta 2 ай бұрын

Another brilliant job but I would love to see you do the same on a brick wall.

@richardphillips3303 2 ай бұрын

A masterclass in fitting a door, with the added bonus of cutting a hole in a wall! Thanks Stuart, that was amazing 👏 😊

@johnthresher259 2 ай бұрын

Stuart, to make life easier why not custom make your own door lining to the size of the door plus a few extra mm so you don't need to trim the door. I believe, and please correct me if I'm wrong, that in a lot of new builds the doors/linings come ready assembled to fit into the opening so no trimming. Great video as always. Keep 'em coming!

@StrawbyteWorkshop 2 ай бұрын

You're not wrong about new builds, if the architect has specified 'cassette' doors, the doors will come complete, closed and slot in the opening. Initially fitting with tabs into the wall face and hidden by the architrave. Each hinge has an adjustment screw that allows you to get the hinges to swing properly and maintain a consistent gap. I've 10 in my 5-year-old house, and they're a bugger to match when you have to put a new door in. The only benefit is that factory hinges have curved corners so you can do the whole hinge with the router and a template.

@johnthresher259 2 ай бұрын

@@StrawbyteWorkshop There's a Robin Clevett video where he fits the doors without trimming into the pre made mdf linings. I think it was on a refurb property (not his Big Build) where he slotted them into existing openings and shimmed/packed accordingly.

@dskirkpa55 2 ай бұрын

Thanks for the great advise😀.

@RiBenjafield 2 ай бұрын

Thanks Stuart - great idea for a vid and well explained as usual. Door looks fantastic and I liked the ‘hello!’ moment. 🙂Any chance you could show us how to seal it all back up again as we need to see how to do that for a project we have in mind (only joking - but not joking). 👍

@c.a.g.1977 2 ай бұрын

Nice one Stuart, very informative. Next week the handles and latch? Any chance of showing how you could fit a new door into a plaster block wall?

@anwolfs9804 2 ай бұрын

Makes me want to give it a go myself! Only our walls are made of brick and won't go so easy as yours :D well done, enjoyed watching that

@PhG1961 2 ай бұрын

Indeed, I enjoyed the video very much!

@djcsound Ай бұрын

Nice job mate, cheers!

@francoisf195 6 күн бұрын

Excellent!

@trig 2 ай бұрын

A length of bathplug chain with a magnet on works great. Swing the magnet back wards and forwards along the wall face. When the magnet sticks to the screw let the chain fall from your hand and this will indicate a plumb line which should be the center of your stud.

@TineBeo Ай бұрын

Excellent. Very helpfu.

@2greenify Ай бұрын

Good video thanks! Downside is I dont jave the same tools, so going a low vudget route myself.

@Trapper_Creek_2024 2 ай бұрын

7:17 Hellow! 😊 Perfect timing - I want to make two back-to-back bathrooms into one bathroom. Now I know how to cut the wall between the two, and refinish it so no one will ever know! To get started, I need to remove some cabinets (I think they are going to another room - there won’t be room for them in the bathroom after we do what we’re trying to accomplish), permanently remove two sinks, permanently remove one toilet, permanently remove a tub/shower unit, add in a roll-in shower, add a pedestal sink and poof! A much safer setup for my wife!

@user-fk5dr1gv3v 2 ай бұрын

Hi, I like your videos a lot. I am looking at making some plantation shutters in the near future. A video on this would be good, especially where to source the materials from.

@davet1149 Ай бұрын

Never seen the magnet trick… that’s just awesome.

@paddyhall523 2 ай бұрын

Cracking job.

@Joe-jv5mm 2 ай бұрын

Top tutorial video, attention to detail brilliant for the DIY, What make was the router

@cobberpete1 2 ай бұрын

All praise the multi tool. Makes jobs that much easier. I have a big bucket of those shims. boy do they get used a lot.

@thegreatpretender4197 Ай бұрын

After working in construction for over thirty years, it's very rare I've seen vertical studs set at 400 centres it's more commonly 600.

@EightBitTony 2 ай бұрын

I have that scanner, I find if I hold the scanner in one hand, and put my other hand on the wall (anywhere), then I get much more reliable readings. It's almost as if grounding the wall through me, allows the scanner to operate better.

@michaelnc4450 Ай бұрын

Great post... Thanks! 😎👍

@6panel300 2 ай бұрын

Very good well explained video. Btw, once the lining is fully installed including the architrave etc it is no longer a door lining, it is then a door frame. A bit like an ugly duckling becomes a swan.

@edwardhammock24 Ай бұрын

10:06 probably worth a mention that those black bugle head screws are necessary if you don't want rust marks on the finish plaster. They are expensive for a massive box but necessary.

@AMAZING5355 Ай бұрын

Muchas muchas gracias por compartir la experiencia, excelente video de como colocar una nueva puerta, (y como hacer el hueco para ella), limpio, a velocidad máster, sin prisas, y disfrutando el trabajo, soy también un joven adulto que ama la carpintería...felicidades!!!, recibe saludos desde Aguascalientes México...😉👍

@johnsmith-fz3qk 2 ай бұрын

what a brilliant video.

@fenners1290 2 ай бұрын

This is superb.

@ianpearse4480 2 ай бұрын

Cool explanations.

@shaun30-3-mg9zs 2 ай бұрын

Great job

@pinkplonker8776 2 ай бұрын

I have got to change a load of doors for oak ones. A few of the frames need changing as well. I got a cheapo damaged door from Wickes, it was £20 because of the damage. It is a crappy door but it is perfectly sized and square so I am using it as a template for frames and hinges etc.

@gerrymcintosh4477 Ай бұрын

Jolly good. 🇨🇦🤭👍. I very much enjoyed your videos.

@gardawg3717 Ай бұрын

Great video

@alexlev4631 Ай бұрын

Splendid! Especialy router tips. Why not use flat hinges?

@TheSoapyJew Ай бұрын

Damm. I really appreciate the well made and informative video. Thank youa

@sajidrafique375 Ай бұрын

BEST Handyman

@user-jt3dg7cu3n Ай бұрын

The man is a professional 😂

@colingoode3702 2 ай бұрын

Good video Stuart. Where did the socket go? I did a similar job on breeze block wall to put in a fire door from our kitchen into our attached garage. Made my own door lining out of 22mm thick MDF because std door linings were not deep enough. I put a lintel in as well as intumescent sealing stripping around the door. For someone who's only a DIYer it turned out OK. At some point I've got a loft hatch to enlarge, a utility room at the back of our garage to create & a raised floor in our loft with extra insulation to do. The list seems to get longer longer every year! 🪛🛠

@dazdaz105 2 ай бұрын

Good video and a decent job. Did you make another video on how to sort the electrics out ?

@robanderson240971 Ай бұрын

I use the trend hinge jig, so much quicker. Put the markers where you want the hinges, router them out then transfer the jig to the frame and the markers are in the same place for you to hang the door. It’s just so much easier.