Visit Rapido's factories in China and learn about the challenges facing model train manufacturers today.
Пікірлер: 150
@503railfan6 жыл бұрын
good to see you treat your workers better than other manufacturing operations in china.
@northjerseyrailfan93266 жыл бұрын
Yes it's very nice
@choopsk67345 жыл бұрын
at 3:27 this machine does not have proper safeties. single button operation. operator could have their other hand in the press and cycle it.
@RWSBaden6 жыл бұрын
Hi Jason, I'm delighted to see all those smiling faces at the LRC / Rapido Trains factory in China. Nothing better than having folks who like and enjoy their job. I'm also very impressed you speak Chinese, very nice. I'm also disappointed people would add negative remarks about your fine company, because the models are made in China. Who do those people thing built the Central Pacific railroad across the Serra Nevada Mountains? I believe if Kadar had not purchased Bachmann Trains, Bachmann might now be out of business. In my opinion, the quality of Bachmann trains went up after the Kadar purchase. OK I'm climbing down off my soapbox now. Back to the LRC factory, the downside of moving your factory is you'll be loosing all your experienced workers. I hope you don't run into too many growing pains starting over in your new factory. I wish you continued success and please don't forget us N scale guys. Merry Christmas Jason and the entire Rapido Trains crew. Cheers Rich.
@Zach_Bloomquist6 жыл бұрын
I didn't know Jason speaks Chinese. Very cool. He is like the Anti-hipster in those bell bottoms. Looks like he walked out of the 1970's lol. Frankly he makes these uploads very fun to watch. Always like to get updates from Rapido. And to all the people out there that complain about the products being made in China, Get over it already. Would you pay $1000 for the same SW1200RS if it was made with american labor? Because it would certainly cost 3 times the amount it is now. I bet you would all buy only from Rapido every time if it was "made in the USA" right. Seriously the business model doesn't exist for the economic realities we live with. Almost all model railroading products are made in China, some in Japan, and very few anywhere else. Marklin and others don't count as they aren't major players in the US.
@marcleslac241311 ай бұрын
Im happy you hire expert makers and make it a happy place to work.
@pwblackmore6 жыл бұрын
I think your move will win on a few counts - yes, of course the models should be cheaper for you to produce and, I hope, if they are not cheaper for the customer then at least you should be able to produce more of them; you will be providing jobs in an area that seems to be less competitive; and you should be able spend more on R&D and expand your lines. All power to you Jason...
@TonyFleetwood6 жыл бұрын
i always enjoy the factory updates from china. i know everyone thinks china is the land of cheap plastic, but honestly, the workers put out what is provided. if you provide crap you get crap assembled. not the case with y'all :)
@nkimakowich6 жыл бұрын
That is exactly what I had on my mind as well. Love to see these videos and see the work and attention to detail that they actually put into it as well. You can see the hard work involved. Very cool.
@stevie1564786 жыл бұрын
It's cool to see that Rapido is moving out to more rural parts and creating jobs in areas that really need them.
@billfitzpatrick69106 жыл бұрын
Pick any town in the US . The jobs are really needed in all of them
@jschmid6 жыл бұрын
Wow awesome scenery, those little mountain hills are really cool. Looking forwards to updates on the new factory too.
@saltleywsc6 жыл бұрын
Great video hope the move to the new factory goes well !
@Southern_Pacific6 жыл бұрын
another great video Jason, I enjoyed the behind the scenes look at the industry. I also just finished reading your latest email update. I think i'm all caught up with Rapido news now, some fantastic new models coming out in HO but PLEASE don't forget us N Scalers. Dave
@ToyManTelevision4 жыл бұрын
Amazing. Love to see these places. I understand that model railroading is becoming quite popular in China as people there are making more money. And in fact international railroads. Not just Chinese. Even a lot of western American narrow gauge
@rapidotrains4 жыл бұрын
Absolutely. The Chinese market is a growth market.
@themidlandcompoundarchive94306 жыл бұрын
Nice to see the production of it all, nice new building as well!
@aliiskandar53786 жыл бұрын
huge effort, for a tiny train. not just a toy train. good luck for the new factory
@Alphaminer1006 жыл бұрын
Looks good, now you have some space to make HO scale CLRV's and ALRV's!
@BATTRAIN16 жыл бұрын
Jason, love the videos. Learning how it all comes together makes me feel more inclusive in the hobby. I have never met a person that has traveled that is a racist or bigot. These trolls need to get out of their mommies basement and get some enlightenment. Thanks for all you do Jason, not just with trains.
@chrislef20026 жыл бұрын
This is a great video - Great Insight to the Chinese factories, the latest setups and tools, and the Travels by Train in China. Nice. -Chris
@harrimanfox89615 жыл бұрын
I'm so grateful of how well the Working conditions there.
@rapidotrains5 жыл бұрын
Thanks! We pride ourselves on that. Ms. Wang (in the video) has recently been promoted to process engineer and she's loving it. Not bad for someone turning 23 next month!
@antonbruce12413 жыл бұрын
That "what's just down the road" is sure beautiful.
@rapidotrains3 жыл бұрын
👍
@benzbabecki63096 жыл бұрын
Will your current workers transfer so you can retain the talent and skill sets? Also thanks for sharing this Jason!
@davidmuse70046 жыл бұрын
Very interesting to see the process you have to go through, but it's worth the effort. Thank you for the inside look Jason!! D. Muse . WTCMRR
@BNRailNut6 жыл бұрын
All the Best Rapido Trains on the new Factory it is HUGE
@dpallant6 жыл бұрын
I recognised the view from the Park Lane hotel there at about 2:20! My first hotel on a visit to China and blown away by the size and quality of the rooms! Great videos. Very interesting and looking forward to more of your N gauge work with Revolution Trains.
@shawnhogan87266 жыл бұрын
Thanks for the fun and informative update! Only 20 minutes from the Li River? Icing on the cake I say(almost tempted to move for a job there, then I could practice my other hobbies, canoeing and fishing!)
@joncalon9396 жыл бұрын
Sure the building is huge and clean, but how is the layout situation in Guangxi (sp?) as compared to where you have your existing factories? Will you have to train everyone or will the skilled labor in Guangdong (sp?) move with the factory and take a pay cut?
@tombarnes71965 жыл бұрын
Hopefully, there will be a labor force that can keep your factory supplied with workers. Yes, it is very beautiful.
@florajaskolka21496 жыл бұрын
Good luck in your new factory! Thanks for sharing! Great video!
@tupsters16013 жыл бұрын
great video!!
@rapidotrains3 жыл бұрын
Thank you!!
@pitrow666 жыл бұрын
very cool video. Thanks for sharing.
@bernardchristensen7876 жыл бұрын
Smart move, best of luck, looks like you have assembled a great team. Looks like this will be a win win for all involved.
@awizardalso4 жыл бұрын
I'm an HO scale model railroader. I'm also an old school model railroader and only have the old type of DC powered trains. This new DCC computer type systems is far out of what I can afford. I just buy things I find for sale on eBay.
@rapidotrains4 жыл бұрын
👍
@Castlebridge-006 жыл бұрын
The move looks to be on the right tracks. Waiting for the updates.
@larrymonske80866 жыл бұрын
I love to follow you guys it is exotic locations and having fun working.Thats so important , Ive had jobs that I dreaded to go to work thats bad.I worked at a barrel factory for 5 bucks an hour.
@larrymonske80866 жыл бұрын
How long did it take you to learn Chinese Mandarin?
@jameswavy94946 жыл бұрын
although will say you guys make the most intertaining train videos, everyone else who has legit railroading youtube shows can't make good jokes. Jason looks the actor David Cross
@croasdail6 жыл бұрын
Love seeing how this all comes together.... very cool. Keep it up.
@ichabod03916 жыл бұрын
Wow... Very impressive. I am really surprised at the total modernization of China itself... 👍
@POUNCEMAN13 ай бұрын
Hi ! Love your Product ,, Question ,,, Will you make trains that will operate just on DC voltage ,, and not DCC ,, Thanks
@rapidotrains3 ай бұрын
Of course! All of our locomotives are also available in DC.
@MrDavil436 жыл бұрын
Fascinating stuff. I wonder what those Chinese workers think about the western mindset that goes nuts for model trains, apart from being grateful for their jobs? I have the UK National Railway Museum Stirling Single on order which Rapido is making. Knowing more about the company makes it a bit extra special!
@OwenConcorde6 жыл бұрын
What about the O gauge manufacturers like Lionel and MTH? I heard about MTH making stuff in China and I'm just not sure if they make their trains in Guangdong since you said it's the world's model train manufacturing capital.
@9501599 Жыл бұрын
Did the workers at the old location have to shift to the new location, or did you have to employ more workers??
@alexanderpoirier33506 жыл бұрын
Hey there Jason! Two quick questions for ya; 1) In N scale, have you guys made the 1100 and the 1600 Series Rebuilds or just the 1100 ‘Classics’? 2) Have you guys moved the factory yet or are you still currently in Guangdong? Thanks and keep up the great work!
@rapidotrains6 жыл бұрын
We did the 1600s a couple of years ago. Now we're doing the 1100s and 1400s (and Cubans!). The Rapido factory has moved to the location shown in the video. The LRC factory is still in Guangdong.
@JBS3194 жыл бұрын
You were doing work on the train whereas if I had a view out the front, that's probably what I'd be looking at for the entire ride.
@rapidotrains4 жыл бұрын
Indeed, best to enjoy the view!
@alexanderpoirier33506 жыл бұрын
Absolutely beautiful landscapes in China, very mystical actually. Very happy for you and your company as well Mr. Shron and many congratulations to you and Rapido Trains for the excellent work that you do. Here is to another successful year to all at Rapido Trains! Just out of curiosity, but two questions, pardon my asking. The first is will there be a possibility of dome cars in N scale at all? And the second is how the RDC and RAPIDO sleeper are doing? (Not the models but the real things).
@alexpaumen39376 жыл бұрын
I'm still waiting for the day you rerelease the FPA-4s, FP9's, LRC coaches, and the Canadian.
@megaman33446 жыл бұрын
Very cool! Also, do you think you could soon make a review of the ho scale VIA rail f40 rebuild? I'm thinking of getting one
@Perfusionist016 жыл бұрын
Quite fascinating. Thanks for sharing tis info. Good luck with the new factory.
@edwardlorence6 жыл бұрын
Hello from Chi Town
@Maurice00PA6 жыл бұрын
Thanks for the interesting video. One question: You said the new location was about 500 miles from the old. Won't that increase shipping costs?
@yueqin83146 жыл бұрын
原来在东莞生产的啊,质量真是不错。
@rambojambone45865 жыл бұрын
enjoy your video I'm a model train fan where did you get those bell bottoms?
@rapidotrains5 жыл бұрын
I get them all from Fuzz Dandy. www.fuzzdandy.co.uk -Jason
@phantomrailproductions5 жыл бұрын
DUDE! I NEED 2 LOCOS AND 20 CARS! Those are great!
@rapidotrains5 жыл бұрын
Thanks!
@dabulphilly6 жыл бұрын
Love that u guys actually show who makes your models there’s no slave shop that means a lot I know China out sources us with man power and cost but I understand
@interlinkplus82366 жыл бұрын
I hope the new place is warmer...noticed everyone wearing coats while working. Does adequate heating cut into profit too much?
@rapidotrains6 жыл бұрын
They wear jackets when it is less than 25 degrees. It's southern China. It is usually above 30. Very few buildings have heat in southern China. Not even the hotels.
@richardcolemanjr37496 жыл бұрын
Guys are modern cars like the NSC plastic pellet, 3 bay covered hopper and covered steel coil car coming?
@Edyth_Hedd6 жыл бұрын
I don't think I've ever seen an outdoor shot in urban China where the sky was sunny and blue.
@riderstrano7836 жыл бұрын
I really love your guy's products and I have a ton of respect for the Chinese manufactures, but it still is a shame we can't have more manufacturers in the USA or Canada. Can't wait for my 3 lightweight parlors! Will there be any other NH lightweight equipment in the foreseeable future? Will you guys ever make some Chinese or Japanese models? I have a KATO models N scale 4 car set that my dad go for me while we were in Tokyo, and I wish I could find some HO scale models of them. Would definitely pay for an N700 Shinkansen model in HO.
@hongmaichen30856 жыл бұрын
Will this big move affect the production of 2018?
@rapidotrains6 жыл бұрын
It shouldn't. Thankfully we have two factories.
@andrewr28256 жыл бұрын
I wish you well in your new location. I hope the Chinese “red tape” was easy to manoeuvre through!!
@ProfessorPille6 жыл бұрын
Great video, as usual!
@philliplee9806 жыл бұрын
very cool. awesome video.
@orim298s6 жыл бұрын
Question. How much does it cost per unit in parts & labor to manufacture The Rapido HO Scale FP7 (DC/DCC/Sound) in China? What would be your shipping cost per unit to your warehouse.
@rapidotrains6 жыл бұрын
While we share more information than any other model train manufacturer, we aren't prepared to open up our books on KZfaq. Sorry!
@orim298s6 жыл бұрын
Ya I'd figured that it must be a real cost savings with the labor there. With the average hourly wages of $3.60 and most jobs are paid by the number of pieces you do not hourly. Thanks for giving us great trains & rail cars.
@IamMagPie3 жыл бұрын
How many percent would prices increase if production was done in Canada or the USA?
@rapidotrains3 жыл бұрын
Prices would increase 600%-700%.
@IamMagPie3 жыл бұрын
@@rapidotrains I was expecting a big increase, but six or seven fold? I collect Roco model trains (still made in Austria and Europe, and a highly detailed locomotive with ZIMO dcc sound decoder is approx. US $ 350-400. Märklin had some years with production in China (although they do not like to admit to it, with a lot of quality issues). They now manufacture in Germany or other European countries, still with competetive prices. I know it is impossible to boycott the country that gave us the world-wide flu of 2019, but I'm willing to pay more for models made in the West.
@trainboyyy43126 жыл бұрын
yes a new video
@Frob256 жыл бұрын
Goviacn Ont, I know right?? They have been slacking on videos lately, lol.
@munirahmed29034 жыл бұрын
I love us model Train
@48firefox6 жыл бұрын
very interesting video. could you tell me where Hornby and Bachmann UK 00 gauge are made? Is there any factory tours around on youtube for these factories?
@mrsbear486 жыл бұрын
Peppa pig's
@Zebrails6 жыл бұрын
As previously inquired, will those present workers also be transferred, or will you need to hire new ones to be trained?
@rapidotrains6 жыл бұрын
The skilled masters and managers will come with us. New assembly workers will be hired and trained.
@Zebrails6 жыл бұрын
Thank you very much for your response. I can certainly appreciate the tasks you have before you. I believe your company has opened the eyes of modelers both new and especially old.... old... I mean, those of vintage experience. Awesome history/background Jason explains... an encouraging moral booster for those with old and new dreams as well. Continuously inviting and entertaining videos... and the same with your product instructions! Beautiful future, visually and heartfelt. John [my two loves, Zebras + Railroads = Zebrails.]
@stephan4ever646 жыл бұрын
Interesting video. 1:22 What's the name of the technology that print text on trains?
@rapidotrains6 жыл бұрын
That is a tampo pad printing machine.
@trainroomgary6 жыл бұрын
Cool 😎 Well done 👍🚂
@jetbee11066 жыл бұрын
Hope you might consider doing a re-run of the CN turbo train in HO
@rapidotrains6 жыл бұрын
We are considering it.
@hollpoll6 жыл бұрын
Thanks for being so open and forthright about the state of the model train industry in China you are the only manufacturer really telling us what is going on and showing some of the stages of production. Is there no possibilty that perhaps in the not too distant future you can move the manufacturing back to the USA now that under Mr Trump business conditions are improving ? Stewart
@rapidotrains6 жыл бұрын
Business conditions have always been good in the USA. The issue is simply a matter of cost. It takes about 8 hours to assemble and decorate a passenger car. At $15 - $17 per hour, you're looking at over $100 just for assembly. By the time you factor in tooling, overhead and wholesale discounts, that passenger car will retail for over $500 if made in North America. We wish we could make them locally.
@JohnHill-qo3hb6 жыл бұрын
Jason, what Navy did you get those serious bell bottom pants from?
@rapidotrains6 жыл бұрын
I got them from the 1970s. They apparently want them back. -Jason
@JohnHill-qo3hb6 жыл бұрын
I should think that they would...LOL.
@farmerdave79656 жыл бұрын
I love your locos but I do not need all that detail on the underside where it won't be seen.
@jesatfis16 жыл бұрын
Any videos in the new factory yet ?
@bert26a6 жыл бұрын
Great video, were you wearing bell bottoms?
@rapidotrains6 жыл бұрын
Jason always wears bellbottoms. The 1970s keep calling and asking for them back.
@craigtalbot69306 жыл бұрын
Assembling the wheelsets sure looks like a boring job. Is it too expensive/difficult to automate that?
@el186 жыл бұрын
Is rapidotrains the owner of the factory or just the only one customer?
@kimflycht22586 жыл бұрын
Dear Mr. Jason Shron Will we be seeing the Smithsonian show "Mighty Trains" with the clip of You telling about the "Canadian" from Via?? Happy Christmas and good New Year!!!???? DOOH!!!! It is the other way round!!!
@sparky1071076 жыл бұрын
jason. some day i would love to tag along with you to China. do some videos from a model railroader stand point
@sparky1071076 жыл бұрын
maybe i will start out with you guys at markham... lol..
@larrymonske80866 жыл бұрын
Kharsh mounds all over asia I saw them close in Thailand.
@nemmrrc4 жыл бұрын
Most definitely upgrade the elevator
@jameswavy94946 жыл бұрын
what? It's Really expensive in that part of china, a year ago they had there factory in Canada, where they're from, China is more expensive?
@Modelersguild6 жыл бұрын
Look at those mountains, wtactualf
@pkgautam60026 жыл бұрын
Nice
@johnsmith-piper43116 жыл бұрын
Just wondering if I work for you could I get as many trains as I want for no cost lol
@norbertboge33914 жыл бұрын
Wonder how this going a the moment
@rapidotrains4 жыл бұрын
All going well. The factory has been open since March 1.
@anthonylong58386 жыл бұрын
Awful lot of haze in those city shots... Reminds me of the brown cloud that used to hover over L.A. That air quality though.....
@rapidotrains6 жыл бұрын
The air in southern China is much cleaner than in northern China. The haze in Guangxi is from leaf burning. You could smell it everywhere. -Jason
@BattleshipOrion6 жыл бұрын
you guys should make chinese trains to thank your factory workers and sell them in america just like kato does with their japanese trains
@BattleshipOrion6 жыл бұрын
by the way hows the rapido train car?
@rapidotrains6 жыл бұрын
The RDC is doing great. The sleeping car is a phenomenal money pit! You can read updates at www.rapidotrains.com - look for the links under "preservation."
@anindrapratama6 жыл бұрын
bachmann already made chinese trains thou
@kenneymitchell21794 жыл бұрын
You see, you said something that I just don't understand. If labor is hard to get as well and the cost of operating there is also High, why is it that you cannot operate in the states or Canada? I'm not trying to beat you down or anyting oh, you hadn't mentioned it in this video and another video as well as to what it cost to operate over there.
@rapidotrains4 жыл бұрын
It's still much, much lower than the costs over here.
@kenneymitchell21794 жыл бұрын
@@rapidotrains thank you for your reply.
@Trainsbigandsmall6 жыл бұрын
Marklin and Piko can still keep their manufacturing in Germany.
@rapidotrains6 жыл бұрын
Piko's factory is down the street from our old factory. It's one of the biggest in Dongguan.
@shnorth8886 жыл бұрын
While Marklin and Piko still manufacture some models in Germany, usually higher end stuff, they also have operations in other countries. Marklin has a large operation in Hungry.
@Poliss956 жыл бұрын
Marklin have a big factory in Hungary.
@Trainsbigandsmall6 жыл бұрын
Piko still has their factory in Germany
@rapidotrains6 жыл бұрын
I know nothing about their factory in Germany, but I know about their huge factory in Dongguan. It's regarded as one of the best model train factories in China. If you are suggesting Piko makes all their trains in Germany, then I'm afraid you are mistaken. -Jason
@djmorgan87836 жыл бұрын
I'm worried about all people that lose their job When you guys move
@rapidotrains6 жыл бұрын
Have no fear. There is a labour shortage in Chang'an. There are 25 help wanted signs outside the factory, and none of the assembly workers have been there more than a couple of months. That's one of the main problems in the area.
@douglasschultz98086 жыл бұрын
I can barley handle learning Spanish let alone Chinese.
@whiteknightcat4 жыл бұрын
Obligatory vitriolic trolling post here. Thank you. (I'll just see myself out now.)
@espeemike36986 жыл бұрын
Horrible smog in China!
@rapidotrains6 жыл бұрын
It was the leaf burning from all the farms. You could smell it everywhere. -Jason
@peppermills95546 жыл бұрын
Then you better lower your prices for the customer. Yours are too high and many won’t pay that much
@rapidotrains6 жыл бұрын
If we have to move in order to stay profitable, then lowering our prices is not the answer. Sorry you think our prices are too high. The only way to lower our prices is to leave off the detail or only do mainstream models, and we have no plans to do that.
@themidlandcompoundarchive94306 жыл бұрын
And that's why I like the company, price doesn't matter when you get a quality product in the end!
@N_scale6 жыл бұрын
rapidotrains micro trains has high quality and is assembled in Oregon. Pretty sure profitable as they are on second generation of ownership.
@mikewinstanley74236 жыл бұрын
Go buy bachmann if you want cheap toys these are museum quality models now grow up or shut up
@abbush29216 жыл бұрын
I read an article Financial Times (London) on Hornby and the industry in general and they where saying that prices and hobbyists ages would eventually kill the hobby .