Why Loose Trucks Are Probably Ruining Your Skateboarding!

Рет қаралды 66,175

Күн бұрын

Don't follow trends. Ride what works best for you and if that's super loose trucks then keep riding them.
Looking for a way to support the channel? Consider making your skate purchases from Tactics through this link:
alnk.to/fSgfBYI
DISCLAIMER: As a Tactics Partner I will make a commission from sales through this link. Thanks for your support!!!!

Пікірлер: 710

@ZackDowdy Жыл бұрын

I'm tightening my trucks and if my skating gets worse, I'm coming for you Ben!

@bendegros Жыл бұрын

😂

@UsagisGachaParadise Жыл бұрын

So this was Bens last video😂

@tankii44 Жыл бұрын

Jajajaja

@rollypollyguy3976 Жыл бұрын

90's kids got decks with warnings, "Don't over tighten your nuts." You knew someone got a new deck because you'd see them at school with that sticker slapped onto their crotch.

@ethanfulton9659 Жыл бұрын

@@rollypollyguy3976that’s hilarious!!!

@whydubess Жыл бұрын

"Daewon and Matt Rodriguez ride loose trucks" reminds me of "Hendrix and McCartney never learned to read music"

@Ray-qe1go Жыл бұрын

I’ve watched this guy for a few years (helped me tremendously in renovating my home). My son has recently gotten into skateboarding and in looking for videos to help him out i ran into the same person to teach us how to skate! You have motivated me to pick up a skateboard for the first time and begin the learning journey (im in my mid-40s). So great to see you helping so many across disciplines! What else do you do?? Teach us!

@hangedups2608 8 ай бұрын

38 YEARS HERE AND THREE WEEKS IN 🙏

@rikardhaugstad8575 5 ай бұрын

37 here, beginning again this summer ;)

@gromitmitten7803 Жыл бұрын

I'm with you on this. I just started going back to more of a medium tightness after riding on the more looser side for a couple of years. Feels so much better especially with manuals.

@vyiz1004 Жыл бұрын

My ankle muscles laugh at yours

@bendegros Жыл бұрын

I can tell your like 15

@vyiz1004 Жыл бұрын

@@bendegros Wut?

@vyiz1004 Жыл бұрын

Thats the weirdest type of response even with sarcasm added bro, get outta here yiikes

@ronniecreager2585 Жыл бұрын

@@vyiz1004 poor Fran

@BitesTheDusto Жыл бұрын

I rocked jiggle loose for about 2 months and then tightened up back to normal. Pop is better consistently on medium trucks like you said. But rocking them loose really helped me learn to stay centered the entire time during a trick, and it also strengthened my ankles. 360 flips on loose trucks is so difficult to pop, but when theyre tighter you can boost them hella high. Overall, medium trucks are the best, Loose enough to carve into 180 flip tricks, but tight enough that your pop is consistent

@bendegros Жыл бұрын

Exactly!

@brucebruno842 Жыл бұрын

Agreed, I loosened my backup setup, so I can skate that some days as a leg strengthener and to keep myself centered better. I need stronger legs being 44 years old, so that my joints don't get abused. When I go back to my normal setup I skate better. I now see why Ishod has cyborg looking legs with muscles I've never seen in legs before. I want to see Dewon's legs. Probably straight terminator looking legs.

@BitesTheDusto Жыл бұрын

@@brucebruno842 thats a great idea, I think ill end up doing the same

@Spurgte 3 ай бұрын

I only skated with loose trucks with a slight jiggle; that's all i know Everything is possible with loose trucks once you adjust to it

@pasta8793 Жыл бұрын

*_Daewon has entered the chat_*

@SlickRick4EVER Жыл бұрын

You have never heard of Matt Rodriguez, haven’t ya…?

@Zpoq Жыл бұрын

@@SlickRick4EVER before 9club episode of Deawon? No

@18JR78 Жыл бұрын

Daewon is loose front truck only. Different type of skating too....

@61936 Жыл бұрын

Or at least his front truck

@SlickRick4EVER Жыл бұрын

@@Zpoq - wow… generational differences…

@ejlopez6637 Жыл бұрын

I’ve been a loose truck guy for a long time, but I agree with you 100%. When you can see someone hop on their board and get that little initial wobble, their trucks are too loose. When they start getting any rattle I feel like they really hurt the pop. A lot of the energy that should be transferred into the tail gets dampened by the trucks. But too tight of trucks also suck. I used to crank them down when I was little. Then after learning how to snowboard, they felt gross and I started riding them looser and looser. Turning is way more fun than tic tacking haha. I really enjoy the extra margin of error you get with them. You can land with your board a little under or over rotated and still save the trick. There’s a happy medium. Gotta keep a nice balance of turn and pop. As for current skateboarding trends, I’d like to see one on shaped boards. Seeing you on a 10-9.5 inch heroin egg shaped board with ace 77s would be interesting haha. They have smaller sizes too that wouldn’t feel as weird (I’m on a 8.8 Avi egg that feels like a 8.5), but I feel like the biggest sizes are the most popular.

@everybodycounts8193 Жыл бұрын

True there’s those tries where I land on the board maybe even bolts just not completely centered and I step off the board because of the tightness def a happy medium

@ConnorMcSkaten Жыл бұрын

Love that you made this video! I always skated tighter trucks and typically skate similar stuff to you, lots of flatground and ledges and a couple years ago I got a new pair of trucks and decided to try skating them looser. Since then I've felt like my tricks haven't been working as well but I always attributed it to just getting older and not skating so much! Going to tighten my trucks a bit and see how it goes!

@Space.Pimpin Жыл бұрын

Hey Ben, love your channel I've learned so much from it. Wheelbase for one is a big thing I didn't even consider until hearing your videos, so thank you for that. I am a big fan of the loose trucks, I tried it as a joke once and have just suck with it ever since. I didn't know it was a trend, I'd almost consider switching now that it is a trend but I love it so much I'll just bear with it until it goes out of trend and continue on with what I love. It is difficult! I lost a couple of standard go to tricks when I switched to loose trucks but I loved the challenge of it. Riding the board to me is much more enjoyable, flowy and responsive but I have definitely noticed a learning curve in flip tricks especially. Obviously it all comes down to preference as anything does in skateboarding but I am a big fan of of the jiggly trucks. I personally take both washers out and then shave the top bushing down so I don't fuck too much with the geometry and I am able to get the lock nut threaded without having the trucks too tight. SHAVE THE TOP BUSHING is my advice for anyone considering trying super loose trucks. It's not for everyone but don't worry if it's a trend. Take a page out of Big Daddy Ben's book and just try something new!!!! You may love it or hate it, but it's better to know for sure than to just speculate/hate without experiencing the other side. Go forth and experience! Good relatively unbias video as usual Ben, you give us all a baseline to begin our opinions from and that is always a blessing to us all, ty!

@iamlazyskater Жыл бұрын

Great vid Ben! I've been trying looser trucks recently but this has cleared things up a bit in my head. I feel like I have made skateboarding harder for myself for no particular reason. Its all down to personal preference and I'll be going back to what feels 'right' for me after watching this

@Sammybaked Жыл бұрын

Great video, I agree with you tons! For years I rode really loose trucks, once I started skating medium tightness I felt a lot more control. At this point I just buy trucks and leave them stock, that small rebound/resistance is my favorite feeling.

@matroxman11 Жыл бұрын

I love that you spend the whole video trashing loose trucks and then we get to watch you fall in love with the loose trucks, and you’re right your style is way better. 😂 As a winter basement/garage skater I got really used to riding loose trucks because I had to be able to maneuver in my little 4m square and it made me fall in love with loose trucks. I think it teaches you really good fundamentals of board control and forces you to learn how to center your weight properly on the board before popping tricks.

@Lazy_Prophet 7 ай бұрын

I definitely agree on this one, never could stand loose trucks, not only does it make skating harder but it makes people look sloppy too.

@azazelreficulmefistofelicu7158 Жыл бұрын

For starters, I see a new Ben upload and I watch and enjoy everytime. I started buying hard bushings because they lasted longer and when they exploded it was manageable. Then I've been riding mediums for ages. But as trucks turn got worst (I hated the 90's, skinny boards, bearings condoms and Venture style trucks)... Now after many years of testing I have my favourite. Won't go into details as its my own personal madness. You ride what you like, what you enjoy and ignore silly trends. But I would do whatever is needed for my trucks to turn.😂😂

@iphonealpinist Жыл бұрын

I used to ride aces really loose but recently switched to Indy’s with medium tightness and my skating has improved a lot

@SpaGearHardware Жыл бұрын

I think the loose trucks enjoyers love it for the challenge. Not everyone has absolute performance as their goal. Also loose trucks and narrow boards is the worst combo. 8.5 and above with loose gives you a bigger platform with a lot of wiggle. Wax the wheel wells and youre slipping and sliding :)

@donovanhays Жыл бұрын

Skateboarding is already one of the most challenging things you can do. Most people probably just do it because they think they should. People actually say stuff about how loose or tight people's trucks it's so dumb unless you're actually giving someone helpful advice

@eddym54 Жыл бұрын

Matt Rodriguez rides 7.5 wiggle loose. Not everyone is a matt rodriguez.

@paunchcoorlightly4000 Жыл бұрын

@@donovanhays I agree. The looseness is just another aspect of difficulty. It's all about what you want your experience to be at the end of the day. Bang your head flipping in and out of a tech trick on a reliable board or lad a simple trick without wheelbiting on a unpredictable balance beam. It's a create your own adventure type deal.

@johneapleseed6876 Жыл бұрын

This is true.

@screwyouguysimgoinhome1043 Жыл бұрын

Ah so this is why everyone I see with loose trucks at the local can barely do a flat ground kick flip. For the challenge😂

@morgnificent3rd Жыл бұрын

Tip from a loose trucks enjoyer: Use the stock top bushing and a top third party soft bushing on the bottom. It gives you the nice feeling of loose trucks but it will still have some stiffness so you don't wobble all over the place. 👍🏼

@cv6531 11 ай бұрын

Or just get medium hardness conical bushings....

@morgnificent3rd 11 ай бұрын

@@cv6531 Top bushings are usually conical. I use 2 top bushings, the medium on top and a soft one at the bottom.

@cv6531 11 ай бұрын

@@morgnificent3rd yeah but it fucks with the geometry and will have your kingpin sit higher up. It's easier to just get a single pair of conicals . Same results better kingpin clearance.

@RoyChewbacca Жыл бұрын

Tighten your trucks until the free play is gone. If you find they are too tight, get softer bushings. If they are too loose, get harder bushings.

@matroxman11 Жыл бұрын

Or just buy trucks and never adjust them, the way god intended

@skateparkreality Жыл бұрын

I been riding really extremely loose trucks for many years but I recently started riding just extremely loose trucks. I skate transition and wall ride a lot so I like it

@TheReal_DeanD Жыл бұрын

I like stability so I ride my trucks medium to tight. Thanks for doing this Ben. It is appreciated.

@jamierussell6051 Жыл бұрын

Same trend run through Phx AZ back in the early 90s along with smaller and smaller wheels and super giant pants. Then I started writing "tagging" . Back pack was cumbersome. Great show by the way 🇺🇲

@handywithshovels Жыл бұрын

“Loose trucks save lives” is a fallacy, imo. Moderately loose trucks save lives

@bendegros Жыл бұрын

Agreed 100% I used to ride medium loose but have gone to medium over the years

@RollForever88 Жыл бұрын

Was always a mega tight truck kind of guy. Felt as though it provided me with predictability and a more centered pop off the tail. Nyjah skates pretty tight trucks like this, made me feel kind of validated since people always questioned that at the park. Not to say there is only one way either though…

@slapshakle Жыл бұрын

Loose truck enjoyer for over 20 years here, I think the biggest problem here is that you're using Venture's for the test. I tried a set last year, even with bones soft bushing and the kingpin nut practically hanging off they don't offer the nice carve you'll get with Indys or Ace. They kind of just wiggle around without actually offering a proper turn.

@jaredcornford7252 Жыл бұрын

Agree

@_skott.y255 Жыл бұрын

I feel like something else to take into consideration is the type of truck you're skating as well as the speed you skate. As someone who skates loose trucks I prefer to skate ace and I prefer to skate fast. I like trucks like ace because they are taller and harder to wheel bite on, and when I skate faster it feels almost like the trucks correct themselves and I feel like I have better control.

@monsterandmaster 4 ай бұрын

Yes ! You have to skate them on a line or with decent speed. If not it's like doing a track stand on a bike. Speed increase the balance on loose truck.

@dneck Жыл бұрын

12:58 thanks for skating so hard for us, Ben. Also sick visible etnies logo, I know you love that one!!

@nenemydog Жыл бұрын

I am with you ben. I like my trucks medium loose. perhaps a tad more on the looser side but there's a specific point of diminishing returns of loosening the trucks. I started with tight trucks and worked my way to the looser side after years of skating. I am at a point where i am really comfortable and confident with my board. Like you I would argue that for learning it would make more sense to start of with tight trucks. But going looser is a long process. So that's something where I think changing setup drastically to prove a point doesn't make that much sense. As you say you can't do certain things as easily because of a lack of experience. Something that I noticed with looser trucks is that wheel bite is not necessarily your enemy. the board tilts and tosses you which makes it a more controllable fall than if you land badly on your board and it rolls away. If you ride looser trucks you will develop a feeling for when to commit and when to drop and roll. But overall there comes the point where a board is so loose that it's just unnecessarily hard to skate. I Basically just leave thetrucks as it and shorten the top bushing a bit so i can get it loose enough while still getting the nut on flush.

@dirtyunderpants Жыл бұрын

I've been skating stupidly loose trucks for 6 years, and i honestly see your points in cons. Consistency and wheel bite is hard, and there's definitely a loss in pop, but i love loose trucks so much that i could never tighten them much, if at all. I like being able to swerve and save tricks i wouldn't have landed with tighter trucks. Sometimes, having them loose saves my ass. Good video

@whitbyparkshark Жыл бұрын

Recently switched to hard bushings with some looseness, which was a tighter truck experience but can still give if I come down with enough weight. Was really weird at first but it has made my pop more consistently reliable. That alone is worth tighten it up a bit. I will admit I miss the ability to correct tricks with no tic tac but the tighter tricks help you avoid having to correct that anyway. So yeah worth it for me.

@mr.bouchard403 Жыл бұрын

I skate street and surf skate so it’s a love hate relationship. Surf skating trucks like Carver C5 and CX are incredibly loose but still stable. The moment I switch back to street on Indys or Thunders, everything feels so uncomfortable at first. Carver trucks in a bowl are so much fun because you can double pump up the curves for more speed. Definitely harder to do with traditional trucks. Great info in the video. Keep it up and stay safe.

@richardthiele4206 10 ай бұрын

@mr.bouchard403 I can relate. Carver's are so much fun!!!!!😜👍👍 I'm 57 years old and I started skating again several years ago. I grew up skating in the 70s and 80's building 1/4 and 1/2 pipes and always rode my trucks pretty tight. I mainly surf and quit skating in my 20's. When I first started skating again, I started back on a Carver skateboard to enhance my surfing and keep my old body functioning. 🤣🤣🤣 I don't do all of the tricks and just love going fast and carving around. I went to a small local skatepark and hated it when I stepped back on a regular skateboard. I couldn't flow and had to tick tack around. It sucked!!! Well, you probably know where I'm going with this. I ride wider shaped boards with Indy 159' and 169's. I even have some 10 inch decks with Indy 215's.😜 And yes, I ride my trucks really loose now. I'm a smaller guy at 150 lbs, so I have been playing around with the medium and soft bones bushings in my Indy's. I guess it's my love of surfing and the carving feeling that makes me need to ride loose trucks. If I did all of the new street tricks maybe it would be different, but that's not going to happen for me.🤣🤣🤣 I'm too old!!!🤣🤣🤣 I'm sticking to the loose trucks for the small skateparks and bowls to keep my flow!!!!!!😜😜😜 I haven't tried the Carver at the park yet as I stick to my regular skateboard for the small bowls!!!! Just keeping the fun alive until it's too late!!!😜 Loose trucks???? Tight trucks???? I guess it just depends on what you are trying to do on the board and what you are comfortable with. Different strokes for different folks as long as we keep rolling!!!👍👍

@alinterinte Жыл бұрын

Dude, I'm always open to changing things for my skateboard, but loosing up my trucks really made me feel more comfortable on my board. A very big issue with loose trucks is that you were not trying with the Thunders. I would recommend thunder trucks for loose skating. Anyway, loved this video and really hyped to see you trying to pop with your board flat.

@alinterinte Жыл бұрын

I commented before the end, and I could also say that you getting used to loose trucks made me stick with it. I bet if you spend a week or two with normal bushings just removing the bottom washer and choosing a thunder pair of trucks you will like it even better. The fact that I'm the one that calibrates the board before popping, helped me to understand how so many tricks work.(been skating for 12years, but with loose truck for 3/4 years.. definitely gonna stick with it for a while longer)

@idmhead0160 Жыл бұрын

I'm assuming you are not using stock bushings? I have some Thunders, but, don't like them because they aren't loose enough, even with the nut at the end. I prefer Indy, which turn better and are possible to loosen up enough with stock bushings.

@small.dreams Жыл бұрын

Try out dual durometer bushings. Ace bushings, both the Hards and the Stock/Medium are the best in everything. Their Stock tops (conical) are 91a, bottoms are 86a, the Hards are both 94a. They both come in a Low option also. I’m using the Hards in a set of Aces, and the Low Hards in some Ventures. They work great in Indys too. It doesn’t mess with the geometry too much, but if it does for you then you can always use a different combo to change it ; low tops+standard bottoms, hard low tops + standard bottoms, all lows, different washers, flat top washers, sleeved washers etc. A harder conical top bushing with a soft barrel bottom bushing is part of what makes Aces so fun to skate. Try a flat washer on the top bushing of your Ventures. The bones washers work good.

@roccy5735 Жыл бұрын

I love the loose trucks. I’ve tried to tighten them up and my style just doesn’t feel right without them. It may make certain tricks harder but it just feels great. Whatever works for us individuals let’s do it

@sebastienv7346 Жыл бұрын

The process of watching you try your easy tricks is exactly how it feels to try every trick even after 4 years of skating so I’m now going to buy harder bushings for my aces

@idmhead0160 Жыл бұрын

Tight trucks seems like defeating the purpose of Ace

@dannyblitz2122 Жыл бұрын

I recently put Thunder mediums (the blue) in my aces and it doesn't feel as squishy while still being manoeuvrable. Plus they look cool.

@sebastienv7346 Жыл бұрын

@@dannyblitz2122 yeah that’s what I’m hoping for to keep the turn of aces but a little bit slower

@sebastienv7346 Жыл бұрын

@@idmhead0160 the cool part about aces is the maneuverability not the tightness so if I buy a medium bushing in I’ll have the same turn with less wheelbite and less ghost pop

@booth403 Жыл бұрын

Leave it Ben to give us some much needed truth 😅 so many people getting speed wobbles all over the park these days, trying to match the loose truck trend, not realizing they're fighting the board ...

@bendegros Жыл бұрын

There are many of us sitting at the park just shaking our heads in silence these days🤦‍♂️

@romanquick728 Жыл бұрын

I was really interested in the popping out of crooks point. Definitely going to give it a shot

@roastbeefy0weefy Жыл бұрын

This trend is probably on its way out, but I never understood how anyone can skate in traditional Chuck Taylors without ripping them in the first 15 minutes

@shaun8062 Жыл бұрын

You have to get the ones actually designed for skating dude. The normal canvas ones will get destroyed in like 6 tricks. The skating ones are fairly heavy duty leather.

@idmhead0160 Жыл бұрын

I remember doing just that in the 80s. Got a new pair of them and had holes shredded in the sides within an hour or less

@shaun8062 Жыл бұрын

@@idmhead0160 They must be way different now. I've skated most popular skate shoes since the 90s until now and only recently chucks. Modern skate chucks are quite durable in comparison to all the shoes I've had with the same thickness. Suede shoes made by brands like Emerica and etnies.

@roastbeefy0weefy Жыл бұрын

@@shaun8062 I love the Cons line and CTAS, etc, but I swear some of these dudes in Thrasher vids are wearing regular old outlet mall canvas chucks.

@shaun8062 Жыл бұрын

@@roastbeefy0weefy well if it tells you anything, I have a pair of canvas ones for going out and a pair of skate ones I interchange them with and no one can tell the difference between the two until they touch them.

@Dutch0wnage99 Жыл бұрын

Im a 220 pound skater skating my trucks the way they come. I sometimes crank them a little bit on the back truck. But skating them to lose makes me not avoid wheelbite. If I had to choose between too lose or too tight id choose to tight. It just messes up my balance and I fall down way more.😂

@LowEndMarauder Жыл бұрын

I vary from like 210-220 and I'm really liking (On independents anyway) the conical black hard aftermarket bushings. In the winter they felt medium tight and now in the summer heat after breaking them in they feel kinda semi loose and perfect. I tighten them just enough for one thread barely poking through. Essentially just making sure the nut doesn't fall off.

@brentvinson2307 Жыл бұрын

Agreed

@Dutch0wnage99 Жыл бұрын

To be fair I don't have long hot summers. We have a short very hot summer and then it just turns cold all year😂

@TimMoolmanPhoto Жыл бұрын

Not sure if anyone mentioned it, Chris Cole said on Nine Club that he rides his trucks tight, as it helps his pop and to focus on tricks. Because, like you mentioned too, you don't have to spend so much energy focusing on balancing. I've been skateboarding since the 80s and ride my trucks medium/tight. I find it funny how kids say it's too tight yet I can turn in a tighter radius than the loose truck brigade. Of course I weigh more, am old, and old school too, but I can go fast and still turn tight. 🙂 To each their own, we're all skateboarding, which is still the best thing ever! Appreciate your channel Ben.

@airiushunt Жыл бұрын

I progressed the most and had the most consistent pop which led to the most consistent tricks, I had the deepest bag of flat ground when I skated medium trucks, and probably the only time in my life I was comfortable on handrails. That being said I'm 33 I could care less about "getting tricks" at this point. Once you are used to skating ridiculously loose it's the most fun thing ever and I can't go back. The act of just riding my board is so much fun even if it is at the cost of "skill". I will say I spend 80% of my time in bowls now, only flip trick I do is treflips, and don't skate ledges over 12 inches tall because my pop is shit because of the loose trucks lol. (Also side note Vert skaters typically ride super tight trucks because of high speeds but bowl skaters do not. You have way more flexibility in a bowl with loose trucks.)

@seanskatesalot Жыл бұрын

Ive been skating bones medium bushings but i kept bustin em. I figured its cause i have to tighten them a little too much to get the stability i want. So now im rocking bones med bushings in the bits close to the ground and indy standard hards in the bits closest to the board and its been amazing. Still get good mobility when necessary but gives that stability before the pop. Already got nollie back heels and sw fs heels back after a long hiatus and lande he best sw fs flip so far. Theres a lot of gromms at my park with criminally loose setups when theyre in early learning stages and it sucks to see but hard to get them to change their minds on it 😂 maybe one day. Shot for the vid ben,always good thoughts.

@josephmejia5784 Жыл бұрын

I used to ride tight trucks for freestyle and certain tricks like pressure/toe flips but switched to loose because it feels more fun and it trains me to be more centered and stable. Now I ride loose rattling trucks with 1/8 risers but it's tight enough where you don't/almost wheelbite if you put your weight on either side of the board so I can still do all my tricks

@a7xSkateboarding Жыл бұрын

I used to ride loose Indy's for a while, but it got to the point where I asked myself "ok, wtf am I doing?" So I switched to medium loose Thunder's, which I learned the majority of tricks on back in the day. I also have friends on the other side of the spectrum, who ride trucks so tight you literally have to kickturn in order to turn lol

@mateusds909 Жыл бұрын

Loads of comments! You really poked the bear Ben! Rookie here learning and trying to figure out the right tightness. Not going with jiggle loose to start lol

@xhipnotoadx Жыл бұрын

You should do a review of the Osiris D3 shoe and see if it lives up to the hype from a real skater's point of view. Your show reviews are so in depth and fun to watch.

@lordvader3538 Жыл бұрын

I remember Ben mentioned something about this a while back. Fell into the trend of loose trucks w bones medium bushings, after a few months the bushings would die and my pop would disappear until I swapped bushings. I certainly have more consistent pop with tighter trucks

@plantlover69 Жыл бұрын

Ive been riding without the bottom bushing washers for years. I'm not even sure why, I guess I just got used to it.. I put them in after watching this video and my kickflips got way more consistent. Thanks haha

@codeblue2112 Жыл бұрын

i started skateboarding after years of snowboarding, and its been about 5 years of riding wiggle loose, anything tighter and it feels like im fighting with the board. i prefer it especially when skating my crusty local. the trucks eat up the uneven ground and crust. might have to try tightening up my trucks one of these days and see if i can magically sw tre..

@jasonlu9253 Жыл бұрын

I have extremely loose front trucks with washers removed but medium in the back for my pop. Works extremely well

@EliFleming Жыл бұрын

2:13 IMHO proper slappies aren’t about leveraging your board to tilt up and pull the wheel up with it-proper slappies are about letting the wheel roll/bounce up and bring the truck with it. Shifting to the heel edge of the board with loose trucks makes this happen. That being said, do what feels good for you. Enjoyed this topic!

@cruz36 Жыл бұрын

I remember riding loose trucks back in high school and when I started skating again a few years back I setup my trucks the same way and I was having a hard time doing tricks because of them. So I tightened them and became WAY more consistent after that!! I'm not fighting that instability anymore. It's hard on an old guy like me. I've noticed alot of kids struggle with the basics because of loose trucks and they don't even realize it.

@williamjoansington2491 Жыл бұрын

You can have all the advantages of both tight and loose trucks if you loosen them properly by getting the proper duro of bushings. I have "loose" trucks that have just as much stability and rebound as them being tight. Like, Ben said towards the beginning, Just loosening them changes the height and angle but if you buy the correct bushings your turning angle will remain the same. You also won't suffer the rattle.

@Jaeeedon 5 ай бұрын

I know this was 7 months ago, but how do i know what bushings to get?

@brucebruno842 Жыл бұрын

Those insoles for the MC Raps from Amazon are actually RIEMOT. I am 150 to 160 lbs. and loosened my trucks 3 days ago because I stepped on a friend at the parks board, same trucks and bushings, and I liked how it felt riding around. Especially with the dragon wheels, since it made me feel like I was surfing, little sound and turny. I had to tighten them again to do tricks, and do the one's I could better. I'm 150 to 160 lbs. and I use Bones hard bushings with 1½ threads showing on the front and 2½ threads on the back. 12:00 I just realized you are skating the MC Raps (the colorway I went with). I might try the black ones. I would like to see colorways white etc... with darker but bright royal blue instead of green and white, grey, and black. Again thanks for your videos, and the ETNIES video, because I would have never realized the Raps were still around under the MC Rap title. P.S. the riemot insoles are $2 or $3 and are thinner memory foam that your foot sinks into. You can press your thumb down on them, they will indent, and slowly but visibly rebound. Goes well with the cupsole of the MC Raps. They also have a spandex top coating, so your feet slide in and out nicely, and it feels good, too. Long comment, ha!

@thisgoestoeleven Жыл бұрын

I mostly skate transition and curbs, so I like my trucks loose-ish, but I can't do the "so loose they wobble when you shake the board."

@zbignoz.tunnlerwitz_109 9 ай бұрын

I learned kickflips on floppy trucks in 1988 and was also skating lots of vert and the og combi pool with 66mm wheels. Ever noticed how thunders and ventures have the same kingpin to pivot angle as indys but are canted at a different pitch in relation to the deck? Short lived 80s trend was canted riser pads which pitched either or both of the trucks changing the rate they responded to lean angle. Another was when Natas started running a squatted board with the back truck lower then the front. Much like the act of skateboarding, trends keep trying til they make it and get better through learning what doesnt work.

@Eve.with.a.Y Жыл бұрын

I’ve honestly moved to looser trucks (as a beginner) for a combination of reasons. first and foremost is just that I weigh like 115lbs and have had trouble leveraging my weight well when I need to carve more sharply, but secondly, as I’ve seen other people mention, getting used to a smaller margin of error for stability has really helped me with my balance overall. I may work my way tighter again when the time comes to start really working on flip tricks, but for now I kinda look at it like I’m replaying the tutorial level on harder difficulty so I can be more confident when I move on to the next level haha

@idmhead0160 Жыл бұрын

If you are only 115 lbs. I would think you would need loose trucks. I'm 170 lbs and skate Indys with the kingpin nut at the end and stock bushings. On 169s with super soft Indy bushings, they seemed maybe not even as loose as I wanted them. Not sure why, but, 159s with stock bushings seem way looser to me. I have several sets and have found that to be the case.

@lo0ser555 Жыл бұрын

@@idmhead0160 i found this out recently but newer (last year or so) indies bushings and pivots seem to be harder making them less turny.. really struggled to get my new set to turn the way i wanted. tought it was a me problem, but the forums are full of it.

@derekpigozzo9022 Жыл бұрын

your a trooper Ben die hard style even with loose trucks!!! i'm going to start skating with tighter trucks!! seriously! thanks great vid!

@cidraking Жыл бұрын

as an older head (35y/o typing here) i got on the loose truck wagon back in the day because of Matt Rodriguez hehe. since then i've been going back and forth from loose to medium to medium loose... and yes: the looser you get the hardest it is for some flatground and setting up comfortably for some stuff but here's "my hack" (or what i used to do while on the loose side): loose trucks + wider wheel (bones v5/spits classic og-conical) improved quite a bit the stability while setting up for tricks on loos trucks. (classic spits and loose trucks are a nightmare imo. at least on 52-53mm) all in all since i don't like to play a lot with my kingping nut or bushings i'm a medium-loose guy mostly depending on the weather since it gets super hot on the summer where i live :). Un saludo!

@drewkingvideos Жыл бұрын

205lbs on 8.75 popsicle with Indy stage11 159's and 55mm wheels. Replaced bushings with Bones Hard. Just loose enough to jiggle a little. Doesn't feel too loose and definitely not "medium tight." Waxed wheel wells forsure. For me this is the funnest way to skate because it does make it more challenging and I believe it makes me stronger and have more balance after 3 years of riding like this.

@idmhead0160 Жыл бұрын

8.75 and 159s are king

@monsterandmaster 4 ай бұрын

So true what you said at 6:13. I used to skate super loose trucks and I would be able to push or ride any of my friends board without loosing my balance cause it was sooo straight for me. I was not to much of a tech guy with flip tricks but as always looked very comfy on my board. I have to say that I didn't look to skate that way, it's just that when I was a begginer I just been used to totally destroy bushing. Anyway I try to tighten them a little bit more now but when I think my truck are tight people still tell me i'm super loose. As for wheelbite, I really think you have to skate hard wheels tho. 103a at least is the way. Honestly wheelbite is not a problem for me. My board as the inset of the wheels in the wood but I just don't feel wheelbiting.

@averageskater900 Жыл бұрын

If your trucks turn you can carve bowls fine. It’s more to do with the turning radius of the truck than how loose it is. For example you can loosen a krux k4 as much as you like and you’ll still need to lift your front wheels in a bowl

@_freedumb Жыл бұрын

Absolutely agree. Medium is the way to go, being able to carve + still have decent pop = winning

@jebgordon6608 Жыл бұрын

Wheel bite and speed wobbles are why I started tightening up my trucks in the 90s. I cannot imagine some of the fastest hill bombs I've done on loose trucks. I think the fastest I was ever clocked was by Doug at just over 65km/h and no I didn't know he was in the car behind me, and yes I was pulling away and breaking the speed limit.

@satanlaffing Жыл бұрын

30 + years ago we used to bomb this little bridge by my house & clocked 40 mph. I always rode super tight Trucks....Not Able To Actually Turn Tight. Speed Wobbles Are A Bitch.

@thatoneguy2057 Жыл бұрын

I skate pretty loose trucks in bowls and the same principle you mentioned with the underrotated flip is the same in bowls. You can roll away from situations you'd otherwise slip out on. Also riding bowls includes vert sometimes but I think it's not nearly as fast as skating a vert half pipes and you turn tighter in bowls than you do on a vert ramp. Otherwise yeah street is so much easier with tight trucks.

@JazzMachine77 Жыл бұрын

I like my trucks medium but more to the loose side. I will give a shot in tightening up a bit and see if it improves my skating. Another trend in skateboard is putting rails on the decks which I was surprised when I first saw it because that was common when I started skateboarding in the 80's and it disappeared in the 90's and 2000's I guess that came back when it became trendy with shaped decks and later on old school decks.

@rollypollyguy3976 Жыл бұрын

If you haven't already, you should try the Tensor Mag Light trucks. A pair of them is 2oz over a pound. Hollow axle, hollow kingpin and magnesium alloy hangers.

@chrisallen477 Жыл бұрын

Dawg your style’s really coming along! Lol hang in there ha.

@s.b.l4717 8 ай бұрын

Man its so true, i ride loose my pinch is 🔥, mannys, tre flips are flowing, i did notice my 360 pop shuvs and 360 no comply are much easier on tight trucks

@ellmusumeci2512 Жыл бұрын

I ride ace trucks which have softer bushings, but i bombed a hill with them on the thread and got tossed, so I'm slowly tightening them by a quarter to half turn because it also helps with popping tricks going kind of fast.

@tanner2x439 Жыл бұрын

I dont mess with my bushings but i ride my indes as loose they can get. If you lean far on a trick it works with your body. Really compliments the lean. there is more deviation and in my opinion has more flow to it style wise.

@JacobMyersSkate Жыл бұрын

I ride medium back truck and loose front truck. Gives me stability but im still comfortable on my board. The tighter my trucks are the less comfortable i feel on my board and the worse my style gets but it does add stability.

@TrZae 5 ай бұрын

as a kid i skated my trucks as loose and can be, i mean they were only as tight as my 12 year old hand could tighten them, i remember my friends hating it when they stepped on my board. as i grew up i started to tighten my trucks up and honestly found a perfect middle ground (for me) with enough pressure i can wheel bite but very rarely unless i put a lot of weight on it but i can still turn with fluidity and have enough play with the pressure on my board due to how loose they are

@xhipnotoadx Жыл бұрын

Man I just bought a set of the Tony Hawk Indy's and boy do those things have a tight turning radius. My 35 year old ankles get tired because the bushings aren't stiff enough to keep the board tight. I'm going to switch to the hardest bushing Independent makes to try and solve my dilemma. Love your videos btw.

@legalizethegreen Жыл бұрын

I have venture high trucks complete with 1/8" riser pads and super soft bushings and 54mm OG spitfires for cruising down steep but shorter pitches. Love them for spinning the board around and deep cuts to slow me down while hitting the hills. Overall, much harder to do flip tricks with and I leave it at home when I am doing any other kind of skating. Wouldn't even recommend it for seriously killer hills because the looseness will wobble you right off the board.

@clarence5354 Жыл бұрын

As an ace truck wobbly loose ass lookin truck user, i slowly loosened my trucks gradually over a period of years and now my ankles have been strengthened and I have more control than ever so it can be good but just gotta work into it!

@bendegros Жыл бұрын

I dunno, might have to see some clips to verify

@tamidon40 Жыл бұрын

I keep the rear trucks tighter than the front for stability but turning. I don't ride fakie much, so I don't have issues with one being a bit tight.

@diddymelone2265 Жыл бұрын

actually I discovered this for myself too. when I started out 3 years ago, I skated my trucks very tight, for stability. then I loosened up more and more and it felt good, think I made more progress like that and its definetely fun to deep carve. but as I got more proficient with my ollies and going into other tricks, I found it much better for me to have my trucks medium tight. honestly I was insecure about tightening my trucks, because of the trend and everyone saying that loose trucks make you a better skater and whatnot. but I finally came to the point where I dont want to listen to what others say makes you good or not, but what I feel good with.

@bendegros Жыл бұрын

Glad to hear it!!!

@demon_3x Жыл бұрын

I’ve always just put on my Indy’s and never done anything to them. I leave them at factory tightness and they work fine for me. Wheelbite sometimes but I contribute that to my 56mm wheels on Indy mids. I may tighten them a little just to be a bit more stable and use less energy balancing and more for skating. Thanks Ben!

@bendegros Жыл бұрын

Dang! 56 on mids. I’m falling down just thinking about that.

@demon_3x Жыл бұрын

@@bendegros I’m from Newfoundland, our streets and spots can get pretty jacked so I got used to bigger wheels

@idmhead0160 Жыл бұрын

@@demon_3x I have 56mm Dragon Wide Cuts on mids and it didn't seem too bad to me. I was afraid it would be worse. Normally, I skate 56mm on Indy 159 forged hollows

@idmhead0160 Жыл бұрын

Factory tightness to me seems sketchy though. The nylock isn't normally all the way on the kingpin by default. I normally tighten them down so they are flush and the nylock is all the way on

@demon_3x Жыл бұрын

@@idmhead0160 that’s strange, because whenever I buy them it sits flush with the top of the kingpin with each thread in. And no you’re right it isn’t bad having 56mm on Indy mids, people just think you’re a mad man when you say that’s what you ride and I love it 😂 but then again I am on mids. So there is no kingpin nut for me to go off, but they’re doing good since last year. I do a lot of hill bombing so I’m on full conical spits as well, I like how they slide

@diplenski Жыл бұрын

thanks ben, glad i was able to catch it live for chat

@bendegros Жыл бұрын

Hope you enjoyed it!

@shanewilliams6077 Жыл бұрын

i ride med loose... im having trouble kickfliping, so i was like let me try tightening my trucks. i never ate crap so hard just pushing. board went one way i went the other, right on my a**. when loosening or tightening trucks i think a gradual build up either way is better than going all out one way or another.

@panictryouts Жыл бұрын

you cant expect to loosen your truck and feel good right away. it takes weeks before you get used to it fully. I rode jiggly trucks for a while, but doing any kind of flip trick was definitely harder. I tighten them to about medium-loose.

@bendegros Жыл бұрын

Medium loose is where it's at. Also, I didn't expect to be used to it nor would I ever suffer through those weeks to get used to it.

@markbradley5355 7 ай бұрын

I’ve been riding loose trucks since the 90’s, a lot of my buddies rode super tight trucks, when it came to trying out their board it always felt so uncomfortable to me. As I’ve gotten older and a bit heavier lol, I’ve come to realize maybe tightening my kingpin just a bit more might be beneficial.

@msl_lpz Жыл бұрын

When I ride loose trucks I find that I have to put in extra effort in staying stable which makes my legs tense up. But when I tighten my trucks the stability helps me keep my body more relaxed and my turns more predictable

@jakepartridge8773 Жыл бұрын

I'm all for loose teucks but the washer thing is just mad to me. I know someone who does this and they go through bushings faster than any other component on his board. Crazy

@wilt444 Жыл бұрын

try putting the washers back in and loosening them until the nut is flush w the kingpin, doesnt change the way the truck sits but gives u a loose truck feel without a couple issues u mention like the bounceback on grinds

@Kultactivities Жыл бұрын

Yeah I agree, I ride med tight trucks with soft bushings. I don’t get wheel bite, unless I try like super hard. I do a lot of slappys and having medium tight trucks works perfectly for all my slappies, nooooo wheel bite at all.

@dial3 Жыл бұрын

Over my years of skateboarding I went from what my friends thought were super tight trucks to medium loose trucks. I definitely noticed a huge difference, it felt like I had a bit more leeway with landing tricks and just felt more flowy/surfy fun. I ride bones hards with my kingpin nut flush with the kingpin. Feels perfect to me.

@dial3 Жыл бұрын

Yeah! I haven’t had to adjust my trucks at all since? What are you riding? I’m riding Indy hollow forged 149’s.

@galvanizedgnome Жыл бұрын

Ben has inspired me to ride rock hard GrindKings and throw varial flips in my jean shorts.

@bendegros Жыл бұрын

Do it!

@ToniLovesSkateboarding Жыл бұрын

in the 90's my trucks were rock solid and you can tell in my clips. I feel it made my skating more sketchy, specially my landings. more tic tacking back then. Nowadays, I ride medium tightness trucks and I feel like it has improved my landing 100%. No tic tac and also not much wheel bite. Super loose trucks would drive me insane! PS: the youths at the park still think my trucks are too stiff, hahaha! damn trends!

@premonemo Жыл бұрын

Truck tightness is mainly a preferance thing if we are talking what most of us skate (micro/mini ramp, ledge, flatbars 3-7 stairs) Its big gaps, vert and hillbombing where I find siffer is better. Personally I enjoy looser trucks (“3/10 stiffness”) because they’re more playful and fluid, I often have to skate on/through busy city streets and the sharper turning comes in handy.

@DonnieEls Жыл бұрын

im just now realizing Ben Degros has secured the silver KZfaq play button! Im not crying you are!!! Congrats Ben!

@bendegros Жыл бұрын

😂 thanks!

@ItsSker Жыл бұрын

I've been debating on tightening my trucks a bit. This has got me thinking I should tighten them!

@bendegros Жыл бұрын

A lil quarter turn won’t hurt but don’t overdo it.

@ItsSker Жыл бұрын

@@bendegros Thanks dude! Ima try this today

@GZAndrew Жыл бұрын

Since I’m more of an intermediate skater, I tightened them up and my Ollie’s are better

@okosakaroklenni Жыл бұрын

I'm only 1 month into skateboarding (at the age of 39), and both my globes I bought (a cruiser and this week a normal popsicle), and I prefer loose trucks. Yeah, when tightening them a quarter of a turn, its more stable, no wheelbite, but doesn't feel that good. One thing is probably the more effortless turning, but I also enjoy it more when practicing manuals, or body varials. And I found it to be more forgiving, when I don't land on the board perfectly, since it doesn't "fight" against my feet, so the board is less of an obstacle. I think I'm going to switch back and forth between loose and medium. Medium for new tricks, and loose for practicing. Oh one more benefit: it forces me to have a better body alignment. When the trucks are tighter, I tend to slouch more.

@goldleader6169 Жыл бұрын

I know this really wouldnt be your cup of tea... but id like to see what you think of one of those Heroine Egg boards that are super trendy at the moment

@bendegros Жыл бұрын

Yet another way people are ruining their skateboarding.

@lo0ser555 Жыл бұрын

@@bendegros damn man. first you going after my trucks.. now my decks.. whats next? tiny wheels?

@jcsk8 Жыл бұрын

Truck tightness is totally a personal thing. What is loose for me is super tight for others and vice-versa.

@K_spawn 29 күн бұрын

7:23 you're right! I've just got to experience that and I couldn't 180 when as before I could, the I switched to the krux K5 and was able to do higher and better Ollie's and 180 , I thought it was the trucks , but no! It was the tightness! I went back to my loose Indy's and tightened them up, and it worked!

@TheGeryal Жыл бұрын

Definitely a trend you should check out is egg boards! We need it!

@pressureflipwillygrind Жыл бұрын

Worst trend ever

@Slabz_sb Жыл бұрын

I find tight is easier to do tricks but you have to land them perfect or you tic tac, loose it harder to learn tricks but gives you good balance and can make a sloppy trick look nice😅

@xitsox Жыл бұрын

medium trucks are the best. As for other trend that i find crazy is the big decks and to some extend the very big wheels, it is like everyone is going to the mega ramp... it is ok for a cruiser but sucks for flip tricks