Want an exhaust for your BRZ/GR86? Watch this first... *Major Issues😭*

Want an exhaust for your BRZ/GR86? Watch this first... Major Issues😭

Рет қаралды 24,075

2 жыл бұрын

Never thought I'd have to make this video, but here is why we were tearing apart my dream exhaust...😭 Luckily these major issues were taken care of!
Make sure to subscribe!: / @benlovrien
ADD ME ON:
Instagram: / ben_lovrien
TikTok: www.tiktok.com/t/ZTd715NnM/
Facebook: / benjamin.lovrien.7
Watch my last videos!:
BUYING THE NEW 2022 SUBARU BRZ!!! Start Up & First Drive
• BUYING THE NEW 2022 BR...
BEST EXHAUST EVER!!! 2022 BRZ Tomei Expreme Ti Catback Install & First Start
• THE BEST EXHAUST FOR Y...
Installing a CARBON GR WING on the 2022 BRZ!
• The BEST THING I've Do...
HUGE CAR PARTS UNBOXING + Why I've been gone...
• HUGE Parts Haul for th...
COMPLETELY TRANSFORMING MY NEW BRZ!!! New Wheels! + More!
• THE BEST Wheel Setup f...
Installing UEL HEADERS On My 2022 Subaru BRZ
• BEST EXHAUST EVER!!! *...
INSTALLING STi INTERIOR UPGRADES ON MY 2022 BRZ!
• INSTALLING STi INTERIO...
Subaru BRZ: CHEAP Vs. EXPENSIVE Exhausts!
• His Exhaust ACTUALLY S...
Noob Driver Reacts to Driving a Type R First Time
• Noob Driver Reacts to ...
Experienced Driver Reacts to Driving Straight Piped Subaru!
• Experienced Driver Rea...
Picking Up NEW WHEELS For My 2022 Subaru BRZ!!!
• NEW WHEELS FOR THE BRZ
MADE MY BRZ AS LOUD AS POSSIBLE UEL Header & Front Pipe First Drive
• MADE MY BRZ AS LOUD AS...
SLAMMING My 2022 BRZ With BC Racing Coilovers!
• COILOVER INSTALL For T...
Dyno Day for the BRZ!!! How much HP?🤔
• Dyno Day for the BRZ!!...
0-60 TEST IN MY NEW 2022 SUBARU BRZ!!!
• 0-60 TEST IN MY NEW 20...
ALL Gear I'm Using, If you buy through my link I get a small percentage back:
www.amazon.com/shop/benlovrien
Music by: www.epidemicsound.com/referra...
Editing Software:
For Business Inquiries:
Email: ben.lovrien@gmail.com
#SubaruBRZ #2022BRZ #TomeiBRZ

Пікірлер: 86

@aidanpropst1811 2 жыл бұрын

Hammer will fix everything #fact

@BenLovrien 2 жыл бұрын

Very fact🤝

@slovrien0 2 жыл бұрын

That's the way to work through the problem!! Great job!!

@Bro1000 2 жыл бұрын

Good to know that and thanks for sharing the fix cuz I'll probably get the same exhaust 💯

@mboss91 2 жыл бұрын

sweet vid. kept it composed with the knocking issues too. nice dude

@RevolveAuto 2 жыл бұрын

Glad you were able to figure it out! Loving the content man :)

@itstashaa 2 жыл бұрын

at least the exhaust was saved, it sounds fire 🔥 i’m definitely excited for the next video though!!

@alandonnelly9788 2 жыл бұрын

Nice 1 Ben hope that sorts the exhaust u looked so gutted at the start so got fingers crossed 4 u mate 👍

@jonathanponce6946 2 жыл бұрын

Didn’t know you were in the same area as Cameron! I haven’t seen a brz riding around the area. Hopefully one day I’ll get to see/hear it in person. Got an ST about two years ago and kinda wished I’d waited for the GR86 to come out!

@alamos8 2 жыл бұрын

I think maybe the reason could be the metal expanding and contracting with heat, and those cycles could potentially re-shape the thing a bit. For example, the position of an exhaust tip when a car being driven with a hot engine versus when it’s parked and cold can differ markedly.

@valtteritoivonen7804 2 жыл бұрын

Great job, I'd apply some protective foil tape etc. on the transmission tunnel though, in case some dirt or debree gets in between the rubbing exhaust it might rig into the paint and cause rust issues in the long rung, but probably not. Just my OCD.

@mivecpower8462 2 жыл бұрын

Nice sounds bro

@Camhill182 2 жыл бұрын

Glad you figured it out. Really good editing, as well!

@BenLovrien 2 жыл бұрын

Haha thanks Cameron!

@okthen8445 2 жыл бұрын

Remove the shield and wrap the exhaust with heat shield instead. Also stiffer hangers might help as well

@chrisdz 2 жыл бұрын

Doing the wrap on a straight pipe like that is fine.. but usually it helps to soak the wrap in water before you wrap to make it more plyable

@1avro 2 жыл бұрын

The editing on this video was 👌🏽😂. It didn’t go unnoticed!

@BenLovrien 2 жыл бұрын

Glad you enjoyed that😂

@Michael_Carroll 2 жыл бұрын

Glad to hear that’s an easy fix… I couldn’t agree more that tomi is one of if not the best sounds exhausts for the brz/gr86

@BenLovrien 2 жыл бұрын

Has to be dude, has to be🙏🏼

@Treaxvour Жыл бұрын

Thanks for doing this. I'll probably go with the 60mm exhaust. Should fit a little better, and a couple pounds lighter

@Mister_Aviles 2 жыл бұрын

I’d recommend stiffer exhaust hangers. It will keep it from twisting so bad.

@chonboi Жыл бұрын

tomei actually does not recommend stiffer hangers cause it can break the exhaust.

@thijsrooijakkers2153 2 жыл бұрын

That's the thing sometimes with aftermarket parts or parts that are not 100% specific to the car. First attempt to fix it, the Jeremy Clarkson way, is so recognizable LOL. Hope this wrap fixes the issue, would feel so good if the solution can be this easy and cheap. Sta safe and healthy. #TrueOG

@isabellamatta1188 2 жыл бұрын

“Hammer and whatever time” 😂😂😂

@T0YSOLDIERPRODUCTION 2 жыл бұрын

Get ready for them headers bruh 💯

@mikedsfitnessjourney3400 2 жыл бұрын

I just subscribed and I'm here in the Phoenix area also

@micahm157 2 жыл бұрын

Try the Perrin 3 inch resonated cause it’s slept on as fuck.

@kingrick307 2 жыл бұрын

I have the same exhaust for my gr86 and tbh I haven’t seen anything wrong with it at all it just probably might be on how you put it on I assume who knows but I haven’t have a problem

@samsmith4067 2 жыл бұрын

So you adjusting the pipes fixed the problem and the heat wrap is on incase it does move again it won’t scrape?

@XanGhost 2 жыл бұрын

Hi Ben, Will not exhaust have problem with overheat or something?

@BigAusYT 2 жыл бұрын

ALOMOST AT 10K LETS GO BENNNN

@BenLovrien 2 жыл бұрын

Almost 😆

@_eduardo_toribio_ 2 жыл бұрын

9.64k bro almost there!!

@BenLovrien 2 жыл бұрын

❤️

@ChrisLowpes 2 жыл бұрын

Hopefully this doesn’t happen to mine but if does at least there’s a fix! Thanks Ben!

@BenLovrien 2 жыл бұрын

I was thinkin ab you and your exhaust when I did this😂 I hope not too lol

@ChrisLowpes 2 жыл бұрын

@@BenLovrien lmao so far so good! I guess time will tell lol!

@BenLovrien 2 жыл бұрын

Well if it does happen, easy fix!

@Stigmaru 2 жыл бұрын

Interesting that the Tomei doesn't stay in there well enough on the 22'

@boost331 2 жыл бұрын

My understanding is that all 1st gen exhausts fit the 2nd gen. I put the borla catback on mine about 3 weeks ago. Its been all good.

@Speedster_ELuu86 2 жыл бұрын

Most will fit, some will not

@boost331 2 жыл бұрын

@@Speedster_ELuu86 I have yet to hear of a system that doesnt fit. This specific one just looks like it needed the rear exhaust hanger bent a bit. I would have brought it to an exhaust shop before I messed with heat shields and wrapped it. There are several others using the same tomei kit on a 22 without reported problems. I bet its just an off spec part with an improperly bent\located hanger.

@anishnar 2 жыл бұрын

Posted this the second after I bought one for my car, sounds so good though goddamn

@BenLovrien 2 жыл бұрын

It’s worth it trust me🤝 worst case you just have to do what I did

@brandonn2584 2 жыл бұрын

Is this exhaust droney ?

@sbklvr 2 жыл бұрын

Polyu mount time while you're at it, lol

@min149 2 жыл бұрын

Let me just finger cross mine won’t have this issue, cuz the same exhaust is already on my Brz for 4 days now. 😢😢😢😢😢😢😢😢

@klaatuzogran4503 2 жыл бұрын

Jeremy Clarkson would have used an angle grinder to cut a section out of the transmission tunnel 😏😜

@matthewarteaga1448 Жыл бұрын

You can always heat wrap the exhaust

@BenLovrien Жыл бұрын

How far did you get in the video?😂 that’s too funny haha

@Th3_0_h8 2 жыл бұрын

Why didn't u just buy the hks cat back. It's a couple hundred more.

@kofibaryehjr8065 2 жыл бұрын

ok good know because if i heard that i would freak out lol

@BenLovrien 2 жыл бұрын

I did trust me😅

@sk-philthy Жыл бұрын

Have the same exhaust, just ordered it I might go ahead and wrap it tbh, since I already have the wrap from my headers but what does everyone suggest?

@alanperez4921 Жыл бұрын

Do it :/ mine did the same thing

@sk-philthy Жыл бұрын

@@alanperez4921 Appreciate it I will then, what year is yours ?

@skunkiiee7333 2 жыл бұрын

Any way we can tag tomei on this? So we can get a new gen exhaust for this

@BenLovrien 2 жыл бұрын

For real I wish they did

@nolifealex 2 жыл бұрын

Ben you look like Faze Adapt

@BenLovrien 2 жыл бұрын

Hahaha😂 I like my face more than his tho😬😂

@JrodMediaa Жыл бұрын

Any issues as of late? I’m trying to get this exhaust 😭😭

@BenLovrien Жыл бұрын

None! Definitely recommend doing what I did beforehand to save yourself the trouble.

@JrodMediaa Жыл бұрын

@@BenLovrien Big bets brotha thank you 🫶🏼

@alanperez4921 Жыл бұрын

Same shit happen to mine

@yoni4438 2 жыл бұрын

楽しみにしています。ありがとう

@holeshot26 2 жыл бұрын

get rid of the resonator & you wont have that problem. that resonator is ridiculously huge!

@Jus_jack 2 жыл бұрын

What camera do you use?

@BenLovrien 2 жыл бұрын

A7C

@Jus_jack 2 жыл бұрын

@@BenLovrien sweet thanks man. Been trying to get an opinion on what camera to get. Trying to start a channel with my focus

@BenLovrien 2 жыл бұрын

You don’t need to go crazy with gear. Just get anything that’ll film 24-60fps if you’re just starting out. I don’t even need this camera for my channel but I film professionally so I use it for both.

@greenmanr33 2 жыл бұрын

Posted this right after I bought the same exhaust for my 22 💀

@BenLovrien 2 жыл бұрын

It’ll be okay😂 worse case scenario if you have this issue you know what to do 🔨

@greenmanr33 2 жыл бұрын

Pay to play lol Keep the videos coming I got the same color and trim 🔥

@IamTerminaLance 2 жыл бұрын

Emberassing tbh...

@BenLovrien 2 жыл бұрын

It was, very embarrassing tbh😂

@jeffsx23 2 жыл бұрын

Where you jack the car stresses me out

@Xcelsior.7272 2 жыл бұрын

Cameron Alford garage

@BenLovrien 2 жыл бұрын

Cameron Alford garage indeed

@DriverGuy23 2 жыл бұрын

“The wrong exhaust doesn’t fit my car. So, I’m just going to bang the shit out of it & Jerry-rig it instead of putting the oem exhaust back on and ordering the correct part” Geezus dude, take the mid-pipe to a exhaust shop and have them add a slight bend to it. You can see how sideways it is in the video. Easy and proper fix.

@tomheringer2047 2 жыл бұрын

Yep.