GE Dryer Makes Squeaking, Grinding, or Other Noises

No video

GE Dryer Makes Squeaking, Grinding, or Other Noises - How to Fix

Рет қаралды 69,333

Күн бұрын

If you have a GE dryer that is making a grinding, shrieking, bumping, thumping, or other kind of strange noise, this video shows you how to tear it down and figure out what area of the dryer may be causing the issue, and generally how to solve the issue.
GE Drum Glide: bens-appliance...
GE Top Bearing Assembly: oemparts.bens-...
GE Blower Wheel: oemparts.bens-...
GE Dryer Drum & Shaft Assembly: oemparts.bens-...
GE Idler Pulley: oemparts.bens-...
Drum Felt: bens-appliance...
Did this video help you out? Send me a tip, and help me make more Appliance Repair videos for people to watch for free!
PayPal: paypal.me/Bens...
CashApp: $BenjaminSchlichter
Affiliate Disclosure Form: bit.ly/3oXeu3B
** Links to external websites and parts may result in me receiving a commission on sales.

Пікірлер: 86

@todzilla09 Ай бұрын

My GE Profile was a bit older than this model but came apart similarly. The belt was broken, glides were worn but not right through and it had a ton of lint build up in the blower assembly. I replaced the belt, glides and front felt. I also did a thorough cleanup of the blower and ducts. My 12 year old GE is now running like new. Thanks for a great repair video!

@DetroitCoko 2 ай бұрын

THANK YOU for posting this video. Just got a used dryer that is squeaking terribly. This video is right on the money. No fluff, just instructions and facts.

@jon1843 3 ай бұрын

Thanks for the video. I was apprehensive when I watched you getting the drum out thinking this was going to be difficult. But it turned out I just needed new drum glides. A very simple fix but would have been much more difficult without your explanation of getting the machine apart. I also noticed the rim of my drum felt rough and felt that it would eat through the new glides if I left it like that. So I took some steel wool and smoothed it out.

@bensappliancesandjunk 3 ай бұрын

Nice, way to go!

@EddieBrasco 23 күн бұрын

Thank you for this video. I used it to take my dryer apart and fix it. A lose screw was left in my jeans pocket and was causing alot of nose. I was able to remove the door and top panel and the screw dropped to the ground. Now, Im a HERO again in my household! Thank You.

@barrynelson8921 6 ай бұрын

Just found your video and this is the exact same model that I have. The noise I had was a rumbling while the drum was turning. The problem was caused by lint packed into the vanes of the blower. Once this was cleaned out, the rumbling went away. Thanks for the great instructions on how to open up the dryer.

@theElderberryFarmer 7 ай бұрын

Thank you SO much for making these repair videos, Ben! I have a new GE dryer just like this one, so having these videos available as a reference will certainly help me address any problems that may crop up. Take care and God Bless.

@bensappliancesandjunk 7 ай бұрын

Glad to help!

@CLS_Steve 7 ай бұрын

You saved me from costly dryer repair/replacement! I opened my dryer up and found a penny causing grinding between the plastic bearings of the door and the drum. Looks like there’s a bit of fraying on my belt as well but at least I can dry for now. Thank you so much!

@WisconsinWanderer 7 ай бұрын

I just had an easy fix on my Maytag dryer, the door latch broke and fell inside the door itself got the model number and ordered a new latch and pressed it in no tools required. Probably saved myself $200 bucks from service call and parts. Your videos are much appreciated 😊

@rayzukowski6266 3 ай бұрын

Thanks Ben, Your GE Dryer video helped me eliminate the screech I was getting. I had to pull it all apart and get the dryer drum out and grease center hub.

@bensappliancesandjunk 3 ай бұрын

NICE!

@jaimehamel7275 28 күн бұрын

Was it an occasional squeak like a dog bark? That’s what I am getting.

@Laurita_vene 2 ай бұрын

Thank you thank you thank you!!!!!!!!!!!! You save me a hundred dollars😭😭😭😭😭 God bless you for share your knowledge to help others❤️

@wendiemeza9567 5 ай бұрын

I just fixed my own dryer. Thank you. This was great.

@bensappliancesandjunk 5 ай бұрын

Glad it helped!

@marklundeberg7006 13 күн бұрын

Listen to Ben and deal with it soon. We inherited a squeaky GE dryer with the house and I waited for a year to fix it. By then it had worn through the plastic bearings and into the plastic assembly that holds them! Had to buy whole new assembly. 😢

@mannycapellan 7 ай бұрын

I just wanted to let you know that you are amazing! Your suggestion to check the start button was spot on! That was exactly what was causing my problem. Thank you so much for your help.😂💪👋

@bensappliancesandjunk 7 ай бұрын

So glad it helped!!! I just posted this video so it's great seeing that it's helping people!

@JDiaz-ii6dg 5 ай бұрын

Well explained. Now I know how to open the dryer to be repaired.

@charlescoon577 4 ай бұрын

Thank you for your video. The diagnosis and moving the front pannel out of the way portions were excellent. Thanks to your video, I found the problem in my dryer and fixed it.

@bensappliancesandjunk 4 ай бұрын

Way to go!

@charlescoon577 4 ай бұрын

It was the Teflon slide bearings. Thank you for the emoji and like.

@martinmoses7142 5 ай бұрын

Thanks! Saved me a dryer repair bill!

@_moni_cat Ай бұрын

thank you for making this video, i followed along and my dryer is no longer making a squeaky sound!

@southsidetom 7 ай бұрын

After replacing dryer motor and rubber wheels to repair a Maytag Centennial Gas Dryer, I think the Maytag is easier to repair. Great vid!

@yfrom3000 3 ай бұрын

Thanks for the comprehensive breakdown, pulley trick was very helpful. Any recommendations on grease when installing a new Shaft & Bracket, would something like Permatex 80345 White Lithium Grease do?

@bensappliancesandjunk 3 ай бұрын

That should work yes

@TruthSword7 2 ай бұрын

What about the felt pads between the plastic glides? I just need to replace those little rectangular pads.

@johnloyd2132 4 ай бұрын

Excellent video and explanation. The best I’ve see even though it didn’t show my GE model.

@bensappliancesandjunk 4 ай бұрын

Glad it helped! What is your GE model?

@johnloyd2132 4 ай бұрын

@@bensappliancesandjunk MO# - DPSE810EG0WT

@leannelawson4177 Ай бұрын

Thanks so much you saved me a service call. FYI DO NOT remove the screws in the back of the drum to clean🤦🏼‍♀️I hope I have learned my lessons 🤣

@michaelmiller5646 12 күн бұрын

I wholeheartedly agree. I just found out tonight how difficult they are to get back in place. Still can't get two of them lined up properly.

@missrachel9291 7 ай бұрын

Thank you for this! Hopefully I won't need to replace my dryer now. 😅

@sampaul9986 3 ай бұрын

Thanks Ben this was a big help. I love your videos they are always spot on. Keep then coming.

@wd8545 7 ай бұрын

I took my dryer drum out yesterday just to give it a ck . Vacuumed and all is good for a while.

@bensappliancesandjunk 7 ай бұрын

Nice!

@petekovacevic3241 7 ай бұрын

Great camera work and narration

@bensappliancesandjunk 7 ай бұрын

Thank you kindly!

@woogi268 7 ай бұрын

It skipped the part about accessing the back screws. It just skipped to unscrewing them. No decription of how to access that area. Other than that your videos are great Ben. I already fixed my washing machine. The dryer looks a lot tougher, but no one gives more detail about the machines than Ben. Thank you.

@cc9z 6 ай бұрын

i use a leaf blower to clean my dryer out works great but has to be away from any building because most dryers are filthy

@wayneminot2655 7 ай бұрын

I would like a review on the new ge washer and dryer combo

@bensappliancesandjunk 7 ай бұрын

I already have one on the channel?

@Trent52 5 ай бұрын

Have the same dryer. Is it possible i could send you a video of it running. Its like 2 years old and during a cycle the sound has changed. Trying to figure out if its normal or not

@brooksrownd2275 7 ай бұрын

Since there aren't any noise demonstrations, are the "unhealthy" noises always dramatic enough to be obvious? I took this model apart a couple times before having the benefit of your videos. (Two of my plastic knobs were broken after only about 5 years!)

@charlesweldon7226 6 ай бұрын

Does the ge dryer have bottom glides like on top ?

@Loota1978 5 ай бұрын

You didn't do anything but take it apart and put it back together. What did you fix?

@bensappliancesandjunk 5 ай бұрын

I showed what could go wrong... Sometimes I take them apart to show where the issues are. On this unit, the main issue was a bad door switch.

@kaci7789 11 күн бұрын

My dryer is making a thumping noise when it rotates. I can also literally move the drum towards the door when I noticed it shifted. I’m going to attempt to take it apart to see if I can isolate the problem. Wish me luck.

@armandomrgl85 5 ай бұрын

My GE gtd42easj2ww squeaks when spinning, could that be the front top plastic bearing, I noticed it also seems to drag down, sounds like grinding? Thanks in advance

@jaimehamel7275 28 күн бұрын

Was it a squeak like a dog bark every couple of seconds? That’s what I have. Nice to know before I open it up.

@terrellscaife2411 25 күн бұрын

Thanks

@Aaron-cz5tz 7 ай бұрын

Can you please recommend a basic refrigerator please. Nice but basic!

@bensappliancesandjunk 7 ай бұрын

I really like ultra basic Frigidaires like the one I mention in my videos all about what to buy for refrigerators

@RyanGrange Ай бұрын

Was going so well but I'm stuck on the door waiting harness. Camera didn't catch the magic maneuver to unhook it.

@mikemccoyrpt 7 ай бұрын

Outstanding video work Ben

@icgold007 Ай бұрын

Thanks!

@Scsibut 7 ай бұрын

As far as dryer brands how do you like ADC. I picked up an ADC 20lb. Series 7 for the house. Except for it being very heavy and having to put in a 6-inch dryer vent this baby can really dry clothes fast. I'm pretty sure this will be very reliable its built like a tank. Have you had any experience with these?

@troychance4208 5 ай бұрын

What are the part number or links for the upper and lower bearing housings. That the tub rides on.both are damaged. Thanks

@mercymackenzie7202 5 ай бұрын

Question: looking straight back into the dryer, the silver piece with lots of holes, I unscrewed that and when I put it back on the dryer sounded lopsided. What can I do to fix this and do I have to take the whole dryer apart or can I fix it from the inside?

@cwhyharris7473 7 ай бұрын

Hey just found your feed I was looking for some information on dishwashers. Bought a Whirlpool dishwasher 5 years ago and now it doesn't spray inside I've replaced two of the cheap pieces which did not fix it and now the motor if I add $100 to it I get a brand new dishwasher so😮. Anyway I looked it up on the internet and they're supposed to last 10 years and this was 5 years in when mine quit working the range anywhere from 1500 to 500.00. I agree with you on the refrigerator unit I've never liked the ice and water in the door it's just too much what are you want to do is keep your food cold thanks

@ScooterMcWhatnow 5 ай бұрын

this video has nothing to do with dishwashers XD

@keithbeanbag3406 3 ай бұрын

Hi Ben great video. I was wondering if you knew where I could get the felt that the drum rides on at the top along with the slides. My slides look good but the felt is about gone. Any ideas? Or do you just use a normal roll of felt cut to fit?

@bensappliancesandjunk 3 ай бұрын

Hi, the glides are here: bens-appliances.com/products/we3m51cm-ge-drum-bearing-glide-nylon? The felt should be this: bens-appliances.com/products/ge-lower-drum-dryer-felt-we09x20441-for-ge-hotpoint-and-mabe-dryers?_pos=1&_sid=daf79c858&_ss=r

@Ikey04-ge9gy 7 ай бұрын

Hey Ben, recently my washer started making a strange noise which is noticed by turning the tub by hand, and I don’t know what exactly it is. I have a video of the sound on my account. If you could watch it and please let me know as to that that sound could be! I would really really appreciate it. Thanks so much.

@troychance4208 5 ай бұрын

I love your video. Thanks again

@BiffGibson 7 ай бұрын

Great channel, what do you say about electric ranges that zap you through the burner even after an element change? Fix or new stove time?

@monicaannebooks7741 6 ай бұрын

Yikes! Thats scary!

@bmorris823 15 күн бұрын

Great!

@DustyOrchid057 5 ай бұрын

wish you showed how to remove the top controller modular.

@bensappliancesandjunk 5 ай бұрын

I'm not sure what you're talking about?

@charlesweldon7226 6 ай бұрын

The glides on top are green looking an the other one are clear is there a difference?

@bensappliancesandjunk 6 ай бұрын

Shouldn't be

@nelcramer6540 7 ай бұрын

Hi Ben which dishwasher would you recommend. I had a seers Kenmore elite which has been 14 years now and no problems at all but it needs to be replaced because it’s on its last leg now. Any recommendations would surely be appreciated

@woodrowwilliams1812 7 ай бұрын

Bosch. Very quiet.