If you have a Samsung Dryer and need parts like the drum roller kit, you can support us by buying here: Dryer Roller Kit + Idler Pulley and Belt: bit.ly/3eHcTw3 Samsung Dryer Motor: bit.ly/3lwh5CA

At first I was overwhelmed and almost bought a brand new washer and dryer. It'll be 2 weeks before they can deliver so I threw caution to the wind and started following your instructions. Voila! I found the problem, did a temporary fix till my parts come in. Thanks for that link, btw! My husband passed away a few months ago so you are just what I needed.

This is my third time taking apart the same samsung dryer for some kind of replacement part. First time the heating element coil broke, then the rear bearings and the belt pulley, now the front bearings. At this point I have a fully refurbished dryer so thats nice. All this to say, thank you for this video. I reference it every time!

Dudes like, "here's how to 'potentially' fix a squeeking issue. Check out these parts" proceeds to teach us how to build our own dryer from scratch.

Hell yea! Straight to the point,Good camera angles and fluent english. Only thing i would add is a few sound clips of each problem/issue.

Thank you so so much for making this video! We moved into a new house and the dryer was making a horrendous noise. After a bit of googling we came across this video and successfully changed out a roller!!!! We have no experience in mechanics and are very proud of ourselves lol. Thank you so much!

Thanks for the video! I had a technician show up for $90 and take apart my Samsung dryer. He then asked for another $230 for the parts and $200 for labour! I told him to get lost. I bought the bearing/pulley kit for $50 on Amazon and did it myself in about 60 minutes thanks to you!

I’ve watched multiple videos and this one is the only one that shows exactly how to make the repair. Plus I ordered all the parts for under $60 from Ben’ Appliances. Samsung sells each part for $60 each. I saved so much money!

Great video and awesome explanations. I successfully replaced the tensioner, belt, and bearings. Turned out one of the bearings was damaged. Thanks for taking the time to make this tutorial!

Thank you, thank you, thank you. My dryer starting clunking. I called the local repair guys who said that it would be 3 days until they could come. I’m cool with that. My neighbor also has a stacked set, and told me it added $150 and a week ( needs 2 guys to be free to get drum out) to get a diagnosis. Thanks to your video I attacked it myself. Total time to replace pulley and clean out dryer was 1.5 hours. Saved me $500. I owe you a beer!!

Good video but you can replace the rear wheels without removing the rear panel. Much easier. And I replaced mine while stacked

Honestly can't thank you enough, video was straight forward easy to follow. Was able to fix 2 issues with my dryer thanks to you. Kudos 👍

Thank you. The wife’s dryer grenaded the tensioner pulley. Disassembled it, $14 in parts and then reassembly. You are the man

This is a really wonderful video. Metal on metal was destroying my sanity. No rare earth magnets for the kids anymore. Appreciate your knowledge and insights!

My back rollers are shredded so I’m going to replace those. I took apart my dryer with your step by step video and appreciate how thorough you were! I sliced my arm on something and forgot to plug back in the door clip so it threw a code for that but was able to easily go back through the steps and find it. I might just start fixing dryers as a side hustle lol

Thanks for the video. I just fixed our 7yr old Samsung dryer. In my case the squeaking was coming from the front lower wheel but I replaced all of them along with the pulley and belt. Nice to see all the components of a dryer for future reference. Should be easy to fix. FYI. I didn’t have to remove the back panel to replace the wheels. I was able to squeeze an open end wrench back there.

Used your video to fix my dryer whose idler pulley had broken and was causing it to make a horrible squealing noise. Thanks for the great video!

Thoughtfully fast but thorough descriptions and video help - which I know takes planning and extra shooting & editing effort so thank you. Hopefully other content providers adopt your style.

Thank you so much for this video! you really helped us. We are on a budget and people like you are so appreciated.

My friend you saved me a boat load of money. Was able to determine one of the back roller wheels was broken after watching your video. Fully thought I was going to have to buy a new dryer. Also made about $2 in change with all the money found in the bottom of the machine :D

You forgot to mention something! If the drum rollers fail within a year of being replaced, it's likely the felt seal on the drum is too worn and needs to be replaced. Dirt is able to get past it and ruin the rollers. The hardest part was finding a felt seal that would work. I used a felt seal meant for an LG dryer in my samsung dryer and it worked just fine. The process of removing, cleaning and installing the new seal was pretty straightforward and it's lasted close to 4 years so far without needing further repairs. I'm not an appliance repairman myself, but I still have a Samsung front load dryer like this one from 2008. When the motor finally gives out, it'll be time for a speed queen.

Dear Ben....Thank You...Thank You...Thank You for your easy going, kind and detailed repair video. You just saved me from buying a new dryer...!

Super helpful! Thank you! Instructions were detailed and clear. Your voice is also very pleasant and calming to listen to while working. 😁

Great video! Thank you so much! You’re the hero we need, not the one we deserve.

This video was very helpful even with the quick reassemble. The only thing that would make it complete is slowing it down when the belt was put back on so you could get a better view of how it's setup. All in all I would highly recommend watching it if you need to fix anything related to your belt assembly.

Worked like a charm for me. The back right roller wheel was frozen on mine. It seems to be the most load bearing of the four roller wheels. Thanks very much for posting this video!

Thanks for the video. I appreciate the time you put into it. Also fixed my Samsung dryer with your help.

Awesome video tutorial! Just what I needed to fix my dryer. It was the rollers on mine that went bad. Also thanks for the link. You saved me $170 from purchasing from other online parts houses.

Thank you for this great video! It was well explained and I was able to find my roller in the back completely disintegrated. I ordered a complete replacement kit including idler and belt. Figured I was in there anyway. Again, thank you. I also have done a few appliance videos to help others.

Awesome video, thank you! One of the bearings to a roller wheel had blown out on my dryer. I did a full kit replacement since I had already disassembled the dryer. I was also able to give it a good cleaning. Good as new for only the cost of a kit and one hour of time!

Hey Ben, thank you for this one, perfect instructions to get my 12 year old Samsung dryer fixed up today. One bearing was totally wallowed out. Cheers

Outstanding step by step! Bought the kit and got my dryer back to Silent running!

Thanks for posting video. Just completed this repair following your instructions. Save me from an expensive repair.

Honestly one of the BEST vids I've seen on YT! Perfectly thorough!

Thank you so much for this!!! Ordered the idler off Amazon for $20 and replaced it within 30 minutes! Easy peasy! Also while I was in there, I hit all the bearings with some lithium grease and vacuumed out the dog hair and dust. Highly recommend these videos! Thank you again!

I just used this video to fix my Samsung dryer. Great video editing. That made it easy to follow along.

Thank you SO much for posting this video. Extremely helpful, and saved me a lot of money!

Thank you very much for this video. Amazing work you made. I fixed my dryer.

Thanks, Man! I did it with your help! My model was a bit different but more or less the same. As i removed the screws i placed them in a plastic sandwhich bag with a sticky note where they came from. Also, be careful not to bend any of the sheet metal if possible, since affect lining up the screw holes when you put it back together. Thanks Again Man!!!

Just wanted to say thank you for this tear down video. Much appreciated. Cost me $35 for a “upgrade kit” off Amazon and some time which saved me hundreds in the end. Thanks a bunch!

This was extremely helpful mine was a faulty roller, I think your vid just saves me over 200$

Thank you so much for this video! Took mine apart following your steps and found a torn up baby sock in the plastic blower fan.

Thank you SO much for this video!!! Saved me from having to buy a new dryer.

Worked like a charm!! My tension wheel had seized and belt grinded right throught it. Also had a bad roller. Replaced everything. Quiet as every. Thank you

I have an Amana gas dryer that makes noise when the burner comes on. I’m confident enough now to take it apart and look for a problem. Thanks for the vid.

Thanks for all your efforts. I bought a new tensioner the old one failed and seems to be a week point. Not a bad job but took me a couple of hours and needed an extra set of hands for ten minutes to reinstall the drum and yes there is lint everywhere have a vacuum handy. Again thanks for your video it really helped.

Thank you so much. This let me fix my dryer that sounded like a dying rabbit whenever it ran.

Millions of thanks to you bro

Best video ever, but should've been labeled " how to completely overhaul your Samsung dryer".

Awesome video. Had mine fixed in no time. Thanks for posting.

thank-you sir for sharing your knowledge and experience. While watching this video the noise went away LOL... I know that is only temporary and it will get worse... but now I feel a little more comfortable having a look at it. I always am amazed how much lint is inside these machines... almost need a way to click a couple of buttons for it to flip up so you could vacuum all the internals without taking it apart LOL. I appreciate your honesty and your support. Wish you were closer!!! will give it a shot... thank-you.

got me through a idle pulley and belt repair thank you!

This video was perfect. Saved me a service call. All I needed was to clean out the lint. Thanks!

Excellent redux of this device.

Well done video. Have a squeal in my 9 year old Whirlpool that I suspect is the idler, but now I may order rollers as well. Not identical arrangement, but close enough to figure out. ** Thanks for stressing the importance of cleaning, that's exactly how to prevent fires aside from clean lint traps. Pull the cover and vacuum every 2-3 years ideally.

Nice job Ben, thanks for taking the time for us DIYer's

Perfect video. Fixed my squeaky Kenmore dryer with the kit from amazon. Thanks!

Thank you for this video. Helped me diagnose our issue. Ordered the parts off your site! Excellent work!

Worked awesome for me. Left some skin and DNA in there but the video was perfect instruction!

You just saved me a few hundred dollars! Thank you good sir!

Followed instructions and was able to fix the problem. Thanks!!!

All I needed to fix my squeaky dryer!

My dry was getting worse and worse on making noise and squeaks. Took it a park just like this video said. Everything looked good. But just put some wd40 then white lightening. Back together and bam. Perfect thank you sir

Used this video to fix my Samsung dryer! Thanks Ben!

I can’t imagine how thanked for you

Best video ever... i think i can open a business.. exelent.

You are the bomb!!! I did it myself thanks to you. Works great. Can’t thank you enough!!! 🎉

Hey Ben, I’m curious if you recommend lubricating the rollers (or anything else) with WD-40, white lithium grease, or any other lubricant OR if you actually do NOT recommend doing so? (Bonus question: I have a matching Samsung washer with no cleanable filter trap. We have many dogs, and I swear our washer redistributes hair (and what seems like fibers) into future loads. Might you have a video addressing best way to try to remedy this?) Thanks for an informative, clear, and excellently summarized video!

This is great! Well done!

Thank you very much for this video. I was able to get all the way through taking the dryer apart, cleaning it, replacing the parts, and putting it back together. This was so very helpful.

Much appreciated. Great instructional video; very easy to follow along. Thanks again.

Brilliant video! I appreciate it, you saved me!

Loved this video very helpful to get it taken apart and put together again, but dryer is having issues spinning the drum now? Any adea what could have gone wrong? I took it apart twice to see what could have gone wrong but I just can't tell!

I bought the kit and it was Def a seized tensioner and belt was frayed. I replaced everything anyway since I was in there. Thanks for your vid!

Thank you for making this. Helping me to diagnose an issue with my dryer.

Thank you for selling quality parts. I got my wheel and belt kit today and my dryer is sounding great.

Very well done video. Gave me the confidence to take ours apart. It would have been nice to hear some of the strange noises linked with a particular failure before you tore it down. You mentioned a reassembly video, but I couldn't find it. I will watch this one in reverse. :)

Thank you! Saved us $300

Good luck sir 🎉

For just a few more bucks, they could have designed these machines to be so much easier to maintain.

I changed my mind , I am going to call a repair man. Thank you for instructions though.

The. Video was easy to follow but I wish u mentioned what section would make each kind of noise so we could order the parts before taking the machine Part

So we did this and replaced the heating element at the same time with your kit. Is there something we missed that would make the dryer stop heating after these replacements?

Thank you so much. Great demonstration. Easy steps to follow.

Love these videos, Ben is so handsome ☺️

Great video thanks for helping us. God bless and merry Christmas.

Is the bearing on the tensioner pulley suppose to feel more tight or just as loose as the other rollers?? I have a noise I’m looking for can’t seem to find it, but it wasn’t a repetitive noise or squeak that something a belt or roller would do.

Really great instructional video, thanks!

Great Video. Thank you.

Thanks love the details

Great video. My Samsung dryer makes a rattling noise, but only on one setting. Tried other settings with similar heat/time and no rattling noise. Any ideas?

Do the blue and the red wire has to be at the same order before you take it off from the heating element? Cause before you removed the wire the Red power wire was on the top and when you go back to install it the Red power was on the bottom.

Full assembly video? I’m not seeing a video link.

Please share the actual noise before going into the repair video. That will let us know whether we need to keep researching. I watched 80% of the video. Thank you

Dude. Thank you so much.

Hello. Have a question. We just moved yo a different state and my dryer was working quiet. After deliveey its very noisy. Could of it been bended or crooked during transport to start making noise?

This was super helpful!

VERY helpful, thank you!

Excellent video !!!

On my Samsung dryer, I didn't need to remove the plastic panel piece (:51), and was able to slip a 17mm wrench behind the rear bulkhead, so didn't have to remove the heating element or rear bulkhead (5:23). It frosts me that Samsung didn't use sealed bearings for the tension pulley or drum rollers; it's like Samsung designs in 5 year planned obsolescence at the cost of a couple dollar parts.