This video is spot on, saved me the cost of buying a new dryer! I followed the diagnostic and found the thermal high limit to be defective. I also tested all components to be sure they were working correctly. 12 bucks to replace high limit fuse/sensor. 12 dollars fixed my dryer and I was able to avoid forking out 500.00 or more to replace my dryer. Ben does a great job with this video and made this very easy to follow. Thank you Ben, I appreciate you sharing your knowledge and allowing folks like me to benefit from your willingness to post the most comprehensive information I have found on this subject in all of KZfaq!

I want to thank you for this video. I fixed the unit myself for less than $50 thanks to you. It took more time to go out and get the part than it did to make the repair. You saved us at least $250 in a service call/repair and probably much more as the unit is 11 years old and we thought “let’s just go buy a new dryer.” Can’t thank you enough. When the internet is used for good purposes, such as this, it truly is wonderful. Wishing you the best.

It was my start button. Danke so much. 2 minutes in and you saved the rest of my day off.

When testing any device within the dryer in resistance or continuity mode on your meter like the fuse or the start switch, make sure the dryer is uplugged. You do not want to test devices in the dryer circuts in that meter mode with any power present.. use great care when doing testing procedures require the power to be on allways check the mode your meter and make sure its set to measure AC voltage and is not set in continunity mode. when measuring for voltage present .. most of the devices in a dryer can be tested in resistance or contunity mode with the dryer unpluged.. (dont just turn the breaker off , unplug it) Some of the edges of the metal cabinet are very sharp take precauations to not cut yourself ..

stuck tooth pick in switch hole 3 or 4 times-I saw a teeny tiny bit of black lint, BINGO- two minute fix, God bless you for your work.

This dryer is identical to one handed down to us Easter weekend. My wife used it one day and it stopped working. I watched this video 4 days ago, in some parts repeatedly, to dismantle and diagnose my dryer. You make it too easy. My issue was the high-limit thermostat. I ordered it along with 2 new light bulbs, a set of glide slides (mine were all worn and/or broken), and a small dryer cleaning kit on Amazon for less than $40. I cleaned it out then reassembled it. I admit, I did have to rewatch the part where you took off the belt so I knew how it went back on. You saved me probably hundreds of dollars. Thanks!

Saved me!! I was about to buy a new dryer and it was just the start button!! Thank you!!

My guy! my apt complex maintenance is so slow and lazy that i was able to troubleshoot my dryer myself with your help

I just want to say thank you for your tutorial. I’m that guy that will try to fix something before I buy a new unit. You saved me 1000 dollars. 😏, I don’t if it was that much( because I never checked), but my dryer works and I spent $20. Thank you very much!

Thank you so much! I found out it was the start button. Dryer works fine and I can fix it myself. Thank you again!

I wish I could give you a thousand likes. I had my Mom's dryer halfway apart when I decided to watch your video. My timer knob was stripped. 😁

Spinning the drum worked for me, thank you sir looked at all repair videos nobody mentioned this one ,yours pop up last and it was amazing

The Best audio/video and clear concise explanations of everything!!

You saved my bacon! It was the timer switch and your video was so easy to follow, thanks!

after replacing the ignitor and coils on my GE gas dryer, the thing wouldn't start back up. so i had to take it all apart again. it wasn't until the final test outlined in the video that i found the culprit--the infernal door switch. the INCREDIBLY poor design made the contacts not line up with the connector when i was putting the machine back together after the initial repair. the contacts on the switch are paper thin prongs which are easily pushed aside by the wire harness if you're not careful while reconnecting. thank you, Ben.

My dryer works now and all I needed was a new belt. Saved us a ton. Thank you!

Thank you for taking the time out of your day to show us how to do this! I was able to replace my dryer's belt using your video. Keep up the great work.

Ben You might want to advise to unplug the unit before removing the back plate. Just in case they lose their grip on it and drop it onto the terminals. Unlikely, but better safe than sorry. Love your videos by the way.

This was so helpful. I have this model and all of a sudden my start button wouldn't respond. Removing the starter button and pressing the starter switch solved my problem. Thanks for posting!

It was my power button thanks man. This video got down to many details save you money.

Steve the appliance guy here after you go through all the things mentioned in this video I will tell you flat out that GE dryers are notorious for having the following two problems not mentioned in this video ( but maybe he mentioned them in another video??). If you've tried to fix your dryer through everything mentioned in this video from thermostats cut off door switch timer and start button and your dryer still doesn't work it's more than likely the following 2 items not mentioned in this video. #1 ge dryer are Notorious for BAD KNOBS which turn but are not actually turning the timer shaft because you will find taking off the knob that it is cracked or broken and needs to be replaced.#2 GE dryer are also notorious for bad motor or bad motor contacts and will cost you some money to have it repaired unless you find a full motor and housing assembly on eBay which makes the repair much easier and less expensive. I'm very lucky here in Vegas as we have a ton of eBay's that sell good used working parts for short money😊

Thanks for this!! Wash SO close to ordering a new dryer until I checked this out. Easy $20 fix

Thank you for this video! I walked through everything with you and found out that my door switch wasn’t connected to the three wires 😂🙄

I replaced the timer on my GE dryer yesterday. Cost $100 but that's after 8 years of service. I'll be happy if it lasts another 3 years. 4:47 🤞

Awesome!! Second trouble shooting test worked! Saved me $$ and time getting a repairman out, thank you!!

Within a couple of minutes, I fixed mine. It was just the button on mine. Got lucky. Thanks to the video

Your video saved me so much stress and likely a lot of money. The issue turned out to be a jammed start button lol. Great video! Cheers!

It was the belt. Thank you for your time and expertise good sir!

As simple as a cracked timing dial. Thank you, Ben!

This video definitely helped me, i had way too much lint build up in fan and motor. After cleaning it thoroughly it started up no problem.

Start windings going bad but I know now thanks to you. Appreciate that

It was the cracked knob, use pliers and turned back on. Thank you so much.

Ben's the BEST ................ Thank You for all you share. Sorry, I had to add the video is just not the same with your Maytag outfit, hope they didn't give your grief over it.

Just wanted to say I love your content-- I've learned a lot. Thanks for posting.

Awesome, thanks. My door was bent not depressing the safety sensor enough to start. I just bent the door a bit and now it engages that sensor enough for it to start.

Thank you Ben...I reset my timer knob and also my start switch was pressed in too far...God bless you Sir...🙏

THANK YOU for taking so much time to make these detailed video's.

You’re videos really helped me save a ton of money

Where is the thermal fuse located on the GE Model GTD42EASJ2WW?

Thank you i found my problem in the first minutes of the video... The timer knob is cracked and was stuck of off -_- thx a lot buddy now I don't have to call a repair guy

Thank you so much. Mine problem found in your video . Was the starter button. I fixed it thanks to you 😊

Este video me ayudo a reparar mi secadora y no tener que comprar otra. No tengo experiencia reparando eletrodomésticos pero seguí las instrucciones paso a paso y encontré el problema en el selector de tiempo de secado. Ahorré $1000 dolares. Muchas gracias por compartir este tutorial.

Thank you, Ben! We haven't had this dryer long, and now it isn't work. 🤦🏽‍♀️

Thanks I wiggled the plug and it started working. will take the outlet apart later and check it. Thanks for the info!!

My ge profile dryer is 22 years old and is remarkably similar to this one inside. The one difference is the door harness has individual wire terminals and not a block plug. I’ve had to solder a new terminal on it.

Thankyou for this video. My problem was the start button… I removed button cover pushed start and it worked. So I’m leaving it off lol

Awesome video. Was able to troubleshoot in 2 minutes

Thank you sir 🙏 you are a godsend! My dryer now works it was the knob like you have said!!!

Thanks for your help brother..You're the best and I will highly recommend your channel..my dryer now is perfectly working properly.

This video is very well presented. Thank you and good job!

I watch your videos even though you may not work on my particular brand just in case i happen to get another brand appliance in the future. Although i do think my future appliances may be used

Thank you, it was a stripped knob for me

😜✌️ Nice internal camera action Brother, very helpful 😁 God Bless us All 🇺🇸🙏✝️

Still valid and good instructions

My dryer looks like that in the back and I'm trying to locate the thermal fuse. I see yours was in the that cut out in the back lower, but mine isn't there. Do I have to take the back off to access the thermal fuse? Thanks

This was great. Thank you.

Excellent video...very detailed. Thanks for helping me fix my dryer!!!!!!!!!!!

Thank You Second Step Worked For Me !!

Thanks to you..fixed my dryer today😊

Love your videos, super helpful and informative!

Thank you, I just found my dryers issues, a broken belt.

Excellent, as always Ben. Thank you for sharing

Great video and you explain it very well.

Number 1 problem on that dryer is the timer knob cracking.

Working on one just like this. I’ve tested the resistor. No reading on it. And tested both of the thermostat switches. The two bigger wires have resistance. But test the two smaller wires and no resistance. Everything else has passed testing. Am I on the right track? The only thing not tested is the motor.

Thank you for the video! It was very useful in trying to diagnose my dryer on my own. Unfortunately I couldn't find my issue. Could you give me a hint? I have a GE GTD42EASJWW that won't even attempt to start when I press the power button. But when I tested the start button for ohm's, the start button worked perfectly (the dryer still didn't start, though). I took the top and front off and found now obstructions and the dryer belt was in good condition. Any hints would be helpful, thank you!

Very clear explanation

Shouldn’t one end of the fuse be disconnected when checking with meter?

howdy. I have the exact same dryer and it seems that the drying cycles button (rotating switch is not longer calibareted. When i turn it on it does not move and sometimes it does not turn on all . Also when i manager to make it start it does start where the "off" indications are. I tried to remove the ratating switch which does not seem to be damaged but it does not make a difference. DO yuo think that switch is the culpit and needs to be replaced? thanks for input

What if the black piece that the timer knob attaches to broke off? Is there a piece for that. I went ahead and bought the timer knob but a little piece broke off

My timer knob is very hard to turn(not broken) and for example i put in on the 20min setting it jumps back to off, it won't turn on. Does this mean the timer needs replacing

fix my dryer in 15 seconds took my longer to comment thank you

Mr.Ben I have a GE dryer the belt was broke I replaced the belt after putting it back together I tried to start it wouldn't do anything after checking I found it will only start in extended tumble what do I need to look at I was thinking timer I replaced it but has same issue.

That was a great teardown! I can’t find the link for the dryer cleaning kit you used.

Hmmm no hat- who are you and what have you done with Ben?- very informative videos keep them coming,

Right on point!

I need help , i have exact model ,switch was broken i pushed and worked then switch fell inside and arcked

Thank you!

My drawer makes the noise like it’s goi g to start but won’t turn the clothes to dry it’s heating up tho button won’t stay on??

my timer knob is cracked and no clicking sound when turning. but tried to turn with pliers but won't turn. Should it turn with pliers?

I cannot remove the started button

Could the resistor by the timer make dryer not turn on I tested for continuity and got nothing and I ohm it out and was not in range

I have this exact same dryer and only had it for about 4 months. Out of nowhere it's no longer heating. Drum moves, vent is clean both outside and near the back of dryer. Any suggestions

in my case i had a wire disconnected from the terminal on "signal on/off". and turned out that red wire that was disconnected was feeding motor. I got that dryer for free from someone and that person tried to fix broken knob... and for what ever reason he disconnected that wire and never plugged back in....

Thank you so much ,

What size belt?

Mine was thermal high limit switch $20

After 2years realized the timer knob cracked 🤦‍♂️… thks

Ben, 😊do you still have a shop in town?

Do you happen to have any information on this model: GTD65EBSJ4WS

You looks very different without may tag cap and dress 😂😅

Thanks

Omg, how can I buy you a cup of coffee?

My GE dryer won't turn on. No lights or anything on the control panel. Getting power from socket and to the wiring block of the dryer. My model doesn't have the fuse. Anyone run jnto this issue??

Thanks for the videos. Where is your outfit?

I liked you better with a cap)) 😆

17:39 LOL

Some of the worst engineering I’ve seen on a dryer