Good choice. I just bought a full size turbo myself.!

Your 100% right now, this video predates many of those being released.

@@PracticallySquared1 yeah i know i was more or less talking to anyone else who sees this and don’t know.

I have a 13.9 pin and welded with a keymo, looking to get my first suppressor soon and I’m pretty much just stuck with the keymo adapter so I’m looking for the positive. I don’t love the price or weight but I’m hoping the length is negated by the barrel it’s on

In the grand scheme of things, you’re not going to notice any difference

Thanks man! I see your a Cincinnati Bengals fan.. Who dey? Go beat them raiders this weekend!

If it meets your lengths then sure. 👍

Check out the Griffin Hammer Comp & Plan A, the new Dead Air Xeno, there are others that should meet the length and be lighter than the Keymo.

The YHM mounts have a mechanical part on them that can wear out and requires removal of the mount from the barrel to service. If you don't plan on removing the suppressor a lot it might hold up but if it does break it will be an expensive repair that might get even more expensive halfway through just to replace a spring.

I'm pretty sure the ultra 7 is either a direct thread or their QD. I'm not sure that it has the proper threads for the "omega style" mounts like the yhm

I haven't formally tested it but I can tell you it's negligible enough that my ear can't tell a link of difference. Probably 1-2 db

@@PracticallySquared1 Thanks a lot! I will have enough time to think about it while the can is in ATF jail lol.

You can find the teardrop without looking, however there's options so choose what you like. Enjoy man!

My most recent video goes in detail on the xeno. Im a big big fan of it.

@@PracticallySquared1 I watched it. Great review. Looks like an awesome system. I do wish the wrench flat area on the adapter was half as wide. I get why they did it but I love how short Plan A and B’s are.

@@jjsemperfi thanks for the praise! Glad you enjoy. I could 100% understand the size. The only thing I'll say is it not only to be able to get a Cresent wrench on there but also big enough to allow larger muzzle devices. In cans like the nomad the blast baffles kinda close so they needed to make it longer to allow use of normal sized muzzle devices. The mini flash hiders other company's offer tend to not really work. I know the guys at DA are flash hider fans so I'm sure that played a part. The slight length looks like more of a deal then it really is. On the gun it doesent make much of a difference.

@@jjsemperfi I really should update this video as I've kinda came to more conclusions on these. Plan a I do not like at all. Some people claim success eith it but I've used a few and unfortunately had nothing but stuck muzzle devices. As far as plan b it works but I HATE spanner wrenches. I wish they would've put flats on there. Lastly comparing it to xeno a little, I loooove the left hand xeno thread. I have had several mount unscrew from the can when taking them out. For 1.375x24 cans the left hand thread on is about the best thing I've seen and I'm borderline at the point where it's all I'd honestly recommend. Sorry for the book lol

@@PracticallySquared1 I appreciate the response. I’m giving the Xeno some serious consideration for sure. Keep it up, just sub’d.

I actually have a video on it. I switched to it about 6 months ago. I'll be putting out a new video on it soon

It depends on the mount. From my experience a quality one is just as good in terms of reliability.

First, thanks for all the kind words! I really appreciate the support. As far as the Nox with a keymo and the ARX I'm 99% sure it will but I've never personally done it. A arx should have plenty of room to fit the nox.

@@PracticallySquared1 You are more than welcome!! Ok cool thank you.

I actually have a video up on it lol. I've been using it for a while now.

Your referencing a 3+ year old video. Times have changed, back then the options weren't there .

Used to watch the pat mcafee show everytime it was on but dude turned into a tool picking on people who have weaker personalities and getting punked by midgets who couldn't even make the wwe.... that miscarriage fucked his whole head up....

Keymo is awesome. Deadair makes some awesome stuff 👏

But can it be used with silencer co hybrid 46?

Sounds like Western PA, lots of people I know from around the Pittsburgh area (or within an hour) sound very similar.

Are you sure your not getting Madd and asr confused? Madd mount was the mount that would sieze on the muzzle device. It wasn't user error, it was a piss poor design. My best buddy has a saker with Madd and it had to go back to silemcerco twice before they upgraded him to asr for free. The mount was poorly designed and rushed to market. Fun fact Mike pappas before leaving silencerco was involved in the Madd and warned them it wasn't ready and the other higher ups decided it was.. the rest is history. The Maadd mount is the litteral worst mount ever made. Even silencerco fan boys will admit it.. keymo is pretty much polar opposite, it gets so much love.. ASR is the mount people use improperly and send cans downrange... Keymo is heavy, but doesn't have anywhere nearly the amount of problems. It's literally a taper that keys on and ratchets down. Works great, I've never heard of anybody launching a can or really having any issues... unlike asr theres no secondary collar to fiddle wity so you can install 1 handed and tuck it under a rail. Also its virtually impossible to install improperly and send downrange. That's like complete opposites. I respect your comment but couldn't disagree any more.

He’s interchanging 1.375”x24 and 1 3/8”x24. They are both used by different manufacturers to reference their thread patterns.

@@phoenixtx Ahh ok . But they aren't actually interchangeable, are they?

@@pitbull82 What’s 3 divided by 8?

@@phoenixtx 0.375...Y?

@@pitbull82 It’s the same number ones in decimal notation , ones a fraction.

It's a phrase, takes a minute to install... I didn't actually mean 60 seconds, the point more so is that they take longer then something like a true QD like Keymo or YHM... that said I've come around a little on the taper mounts. I have a video out on xeno and it's what I've used in my nomad ever since it came out. I'm really due to redo my mount video as I have used a bunch more mounts in many situations and feel I could make a better video and explain more. Stay tuned. Thanks for the comment.