8:17 lmao that death stare at the guy vaping in the background

The rear truck adapters are designed to create tracking as known to surfers and people who do watercraft like kayaking. That's the tendency to maintain straight forward direction. That's how they do surfing. The surf fins underneath force the board's body to go in the direction the front is pointed at. You're so used to motorized boards that you don't notice that carving in surfing is supposed to create human-powered propulsion.

I can't wait for your take on the surfskate evolve board!

This is a must-have for your e-skate board. I've got a Meepo v2.5 and it's the ONLY way I can go fast and turn and cut deep on the streets. For me, it's a safety feature because I can get away from problems on the street QUICKLY because of the leaning and turning qualities this device adds to your board. It's a relatively inexpensive upgrade at $80 for the front and rear truck set. I will never ride an e-skate board without this addition to it.

And so the penny drops! Wondered why I couldn't carve like you on my SR board and I guess it's the single kingpin trucks. Another great video though man 👍

Great review! I didn’t even know this existed but u gave a ton of helpful insight to the Eskate community! I’ll have to look into it. 👍🏼

Man your videos are so good

I have the tendency to believe car riders witnessing me on the streets don't make the appropriate level of space needed to not clip someone riding on the side of a road, (they drive even closer to me, as a show of stubbornness or something) so these days I use the crosswalk and concrete ramps at the corner of an intersection and before having these trucks meant getting off the board, rotating it 90 degrees to go left or right, now I can go up the curb ramp and lean and clear the turn all without getting off the board to pivot it. Something that took an extra 10 seconds to securely do now instant. I really appreciate it for that, and paired with cloud wheels the small 1" concrete curb for storm drain doesn't catch on the old polyurethane wheels forcing me to walk and remote drive the board up that curb, its the urban sidewalk setup accessories that just give it the maneuverability my old long board was too rigid to adapt for. I really am inspired how much your hind leg pivots on your full speed carving, I'll try that too, looks more cardio effective and I'm sure those movements will still be fresh and not played out by any fellow observing eskate enthusiast. Cheers.

It's fantastic! I have it on my Riptide R1X. Refly 74A wheels with this adapter is pure bliss. INCREDIBLE! No more skating, it's electrosurfing the boosted :) Are you riding in the VolvoRace Alicante? That is where I rode my Riptide mostly!

Great review!

Dang, you went all out on the risers.

my diy board has a loaded vanguard and evolve trucks its real good

Hey, what are you thinking about the summerboard? W'd love to see your review on that one!

Thanks for the great video. I noticed you put the front truck in the opposite way(kingpin is facing inward). Is there any reason why? I have Exway Flex and I am getting wheelbite with the battery box right behind the front truck so... probably that was the reason why you inverted the direction of reverse kingpin truck? Thanks in advance!!!

now did you have to use that cf extension plate or did u just double up with the risers to fix that issue?

Looked for your Evolve carbon video with this on, did you do one? Cheers

I noticed you still used risers. Do they not fit without those risers?

It's so high off the ground... Wish there were a solution to attach the hanger from your trucks directly onto a vertical kingpin so you don't need the tilting rail in the rear. Something similar in the front. They should release a zero-kingpin attachment that could attach to the surfskate system so we can get lower ride heights

Very cool video! Thanks! I’m interested in loosening up my evolve board. Would you recommend these?

did you put it on your mountain board for extra turning radius?

Hey what about the suspensions.? Much better on the rough way or better than soft wheels?? Thanks

The front riser isn't needed if you use the carbon plate extension.

I REALLY want this mobility on my eskate. Very familiar with both surfskate and eboard. -I just cant see how combining the two ADDS stability. My riding is speed (in traffic) and carving (for fun). Wouldn't a sneeze at speed be catastrophic?

Could be really nice with a custom drop deck to keep you closer to the ground.

Is this part good for a backfire g2?

Does anyone know if I could buy regular double kingpin trucks for the boosted board v2... or if these are better? just curious about the options that exist. I couldn't find anything on whether the factory boosted trucks in the back could be swapped out.

Thanks for the video! Do you have one for the evolve? Would love to see it!

So you have pumping pushing and electric boost. It's definitely cool however 3 forms of propulsion kinda gives me a hat on a hat vibe.

I had made the same... After some hundred miles, the front adapter broked. So check it, also you think it is not possible to get broken.

How would you compare it with GBOMB ?

Turning radius isn't an issue I have. And the board is tall enough already. This is gonna be a no for me dawg.

How much add suspention on this adapter boss?

Can you make an installation video as me and others can’t figure it out with our Boosted Boards

Very interesting and fun! But very tall...

if change to 120mm wheels you can say you ride a mini horse

why did you put front truck backwards???

Is your front truck installed in reverse?

would this work on meepo v3? im also considering getting the meepo voyager so im curious if that board would be compatable too

Is the rear rail required? Is there significant advantages to having it on the rear as well?

105 MM wheels?

Would definitely get this for my board if boosted didn’t go bye bye and I wasn’t trying to sell my board ASAP since I won’t be able to buy wheels, belts, etc.

Is this better than just double kingpin trucks??

Hi sorry to bother you but I have a problem with my surf adapter. I was wondering if there's another way to put it on because the way that shows me. Made my nose on my backfire G2 snap.. if you can give me any information can you please get back at me or something thank you. Wish I could send you a picture but I don't know how to send it on here !!

Its possible for a review on waterborne adaptor + rear rail raiser setup on the Exway X1 Pro? Very curious if the waterborne setup can work on X1 Pro. And if the waterborne acts like DKP trucks like Evolve's supper carve trucks.

Boosted R.I.P

Yasss

how would this fare on the boosted mini x

Hey my friend, shorten your stance. It will allow You to use your shoulders to engage your hips and carve much more easily and naturally. Just because of board is 4 ft length does it mean that your stance needs to be 3 or 3.5 feet.

Bro come on lets get a review of the lacroix 😎

are you that guy who teaches hockey skating on youtube? Hockey tutorial?

How is the speed wobbles?

Better off just getting the evolve bushing kit? My GTR turns on penny. £70

What’s up guys I was wondering if anyone has tried this on a drop down deck. I have a Bustin hybrid longboard and wasn’t sure if the surf adapter rail on the back truck would be too big

Is there speed wobbles

I have the exway flex which is similar, where does the extender plate go? Their instructions are rubbish tbh. Cheers

Where can I buy this in Poland?

It's like surfing on top of a double decker bus

I keep getting crazy wheel bite. I’ve been thrown off the board 4 times. Not fun haha

Like your video for a lot of different reasons... Video production quality and professionalism Enticing riding and shredding Topic near and dear to my heart as I just converted three Apollo skateboards into surfskates with waterborne adapters and rail adapters Bold yet appropriate footwear for skate video British accent also does not suck Benefit of research and conclusions, especially at the intersection of electric boards and surfskate adapters Subscribing

Aren't you the hockey teacher ?

why cant you take off the adapter? seems too high

What’s your email I’d like to ask a question. My board rolled under the bus. I’d like to show you a pic of it to see if it can be replaced. The back motor has come off the metal mount so I need something to secure the wheels back onto the board. Like a mount. Please help big fan of your videos.

Double kingpins are safer and better, less weight ,lower profile and and more steady. Just my experience.

Yeah no if I want to be standing that high I'll go up some stairs

Oof that looks terrible. But if it works I definitly wont hate on it. Like your video as always, keep it up!

What do you mean 2” ain’t much… #askingforafriend

Please PLEEEEASE put it on the GTR already!!!

Fun but over 95% of riders will not be able to go full speed on this.

Electric board are lame

Nah, Boosted is old news and outdated and overpriced... I prefer my Evolved Bamboo GTR over any "Boosted" product! Boosted hasn't evolved!!! and they should or they will cease to exist!