Thank you for sharing. This will be very useful when I come to overhaul mine.

John, many thanks for the very useful teardown of the Biax Scraper. Glad you had precleaned it for the video.

John, thank you very much for showing the inside of the Biax, I really wanted to know how they worked, it's a quite clever mechanism.

Jens, thanks for the tip, the screw was very tight to undo. I tend to undertighten things, and I do have a torque screwdriver that I use sometmes on very sensitive euipment. Nice coutry Denmark, i drove there from the UK once, quite a long trip in one day. John

Interesting video, thanks

This video is quite timely for me as I'm about to disassemble the exact same model. very well explained, surely the best on youtube concerning the Biax, many thanks. I'm not sure as this vid is 4 years old, if you knew that it is adjustable for stroke, by inserting a 6mm hx allen key in the socket head (the one that has also the nut and cotter pin) and turning it either clockwise or anticlockwise. Access is at the bottom through the holes in the casting, thanks again for this, very helpful, regards, Dave

Hey John.. My same scraper from 1976 just gave up on me today.. So i am in the process of changing all the bearings, the one in the end of the motor is the worst, so i went a bit further.. Nice video 👍👍

Very good job figuring out the disassembly on your own. I wouldn't feel too bad though. After buying my brand new German made Haimer 3D Taster I thought it might be a good idea to email and ask them for an exploded diagram of it's internals just in case. The same results as yours and zero response back from them. There factory sealed and afaik no other company in the world is set up to do any repairs to them if you ever crash one. A trip back to the factory in Germany is the only option. While expensive, that Kluber grease is very good stuff, maybe even better than what the Biax factory first used back in the 1970's.

Спасибо, очень полезное видео !

Great video . Thanks for sharing,and give us insight into the workings , it seems that the new models the case is different, can you please let me know what was the approximate diameter of the wobble mechanism.? If you can’t remember, the outside diameter of the case will do, thanks very much

Remember 33:00 .. that screw holding it. needs only light torque. it needs to be able to flex (the blade ) ... meery x mas from craftman in DK

do you have video when do assambly the swash plate? i am curius how its work.

Little John - nice video ( BR ) The Old Apprentice from Nothingham in Denmark ( dane land ) . . . remember . . UK is Danish. Harald. OUT

How much did you pay for it