BIG BASS with entry level gear? - Making the Sub Box!

Рет қаралды 367,672

4 жыл бұрын

Car Audio Speakers, Subwoofers and Amplifiers range from Entry Level to High End, but with the advancements in subwoofer and amplifier design, how good of performance can we achieve with gear on the entry level side of the scale from a reputable manufacturer? In this build we find out! We kick things off with building this custom ported subwoofer enclosure for our subwoofer, the JL Audio 12W1v3-2. Let's build the box, wrap it with carpet and vinyl, test the bass and plan our next steps!
A special thank to JL Audio for providing the gear for this project!
Visit JL Audio here: bit.ly/CAFandJL
🔨 Recommended Tools and Materials:
✔️ Premade Design Blueprint of the box in this video: www.caraudiofabrication.com/p...
✔️ Custom Subwoofer Box Design Blueprints: bit.ly/CAFdesigns
✔️ Templates & Router Bits: bit.ly/CAF-MobileSolutions
✔️ Wood Glue - amzn.to/3eEJ9xG
✔️ Brad Nailer - amzn.to/3esi7cR
✔️ Flexible Air Hose - amzn.to/2V9sgU8
✔️ Upholstery Adhesive - amzn.to/3hSvJAh
✔️ Olfa Knife - amzn.to/3drBPUZ
✔️Trunk Liner Carpet - amzn.to/2AUSSBL
✔️ Upholstery Vinyl - amzn.to/3esVIfF
✔️ Speaker Terminal Male - amzn.to/2CHGCoz
✔️ Speaker Terminal Female - amzn.to/2VixNrC
✔️ Large Cable Stipper - amzn.to/2ATNm2f
✔️ Small Cable Stripper - amzn.to/3eu5oGO
As an Amazon Associate I earn from qualifying purchases.
🔊 Want more? Check out these links:
✅Car Audio Tutorial Library: bit.ly/CAFlearn
✅ FREE weekly training program: bit.ly/CAFlist
✅ Box Designs, BUILD YOUR OWN BOX!: bit.ly/CAFdesigns
✅Join the CAF Patreon Member Team: bit.ly/CAFpatreon
🔊🔊🔊 FULL VIDEO SERIES PLAYLISTS:🔊🔊🔊
- Ported Downfiring Subwoofer Build: bit.ly/CAFdownfire
- Dad's Sound Quality Daily Driver Build: bit.ly/CAFdadsSQ
- SEMA F150 Subwoofer Box Build: bit.ly/CAFf150
- LOUD Wrangler Build - bit.ly/CAFloudwrangler
- SQ Grand Cherokee Build - bit.ly/CAFgrandcherokee
- Stealth Hidden Bass SQ Build - bit.ly/CAFstealthaudio
Here at Car Audio Fabrication I teach you how to Master Car Audio in an effort to Design, Build, and Install your ideal car audio system. Whether you are a hardcore basshead or a HiFi focused audiophile I would love to have you subscribe and join our community!
-SUBSCRIBE-
kzfaq.info_c...
--LET'S CONNECT!-
Website: www.caraudiofabrication.com/
Facebook: / caraudiofabrication
Instagram: @caraudiofab
Snapchat: @caraudiofab
Music:
Hot Coffee - KZfaq Audio Library
Sunspots - KZfaq Audio Library
Unstoppable - KZfaq Audio Library
Licensed under Creative Commons: By Attribution 3.0
Use of information from this video is at your own risk. You MUST view the full disclaimer here: www.caraudiofabrication.com/di...
Car Audio Fabrication - Master Car Audio - Design, Build, Install

Пікірлер: 294

@CarAudioFabrication 4 жыл бұрын

Thanks for tuning into the build! A TON of you have been emailing asking to purchase the design from this video so I have added it to the site: ✔️ Premade Design Blueprint of the box in this video: www.caraudiofabrication.com/product-page/f0010-jl-audio-12w1v3-1-60-cubic-ft-32hz ✔️ Custom Subwoofer Box Design Blueprints: bit.ly/CAFdesigns Thank you guys for watching!

@JamesMurphy-re3hm 4 жыл бұрын

proper preporation prevents piss pore performance

@heavychevy383 4 жыл бұрын

thats a good lookin build man ...i subscribed a while back & ur videos helped me with the build on my 98 formula ...& on that note, still lookin to add a sub to my system, so do u happen to have a blueprint for a small (10"?) sub box for the little triangle shaped nook in the back of a 98-02 camaro/firebird? ive seen em before, & crutchfield used to sell em, but apparently they dont make em anymore, so i was considering making one? thanx

@robertdouglas4414 4 жыл бұрын

Got a tip to maybe make things a little easier, a small sprinkling of table salt on the glue after you spread it, great reduces the boards wanting to slip back and forth as you clamp or tack it together.

@Jacblack69 3 жыл бұрын

Hello there are you close to Indianapolis, I'll come to you,I have a 2010 Escalade

@donaldbanks9150 3 жыл бұрын

A ex police man👮 lost his house🏠, his car🚘, and his girlfriend🏃🏾‍♀️. What did he lose first?😂 I won against @ckhaos132@@lastamericanhero59A ex police man👮 lost his house🏠, his car🚘, and his girlfriend🏃🏾‍♀️. What did he lose first?😂 I won against @ckhaos132

@xxhyjynxx5939 4 жыл бұрын

9:10 “ I feel like I could do a whole video on braces...” I’m WAIIIIIIITING. Love your work, man! Pure excellence as always!

@CarAudioFabrication 4 жыл бұрын

You definitely will want to make sure to see the next video then. ;) Thanks for being subscribed for two years!

@xxhyjynxx5939 4 жыл бұрын

CarAudioFabrication Absolutely! Watching the progression you’ve made over the last couple of years has been inspiring to say the very least! Thanks for all the content you produce and I truly mean it when I say excellence as always!

@CarAudioFabrication 4 жыл бұрын

New video just dropped! kzfaq.info/get/bejne/nNyAeKiGmqmUYac.html

@Mike.Macmyazka 3 жыл бұрын

I was about to ask about a few of your tools when I expanded the info and found that you had everything listed with links. I really appreciate that level of detail when you and others put that much into your videos. Not only the quality video, but the quality info to go with it. Thanks!

@941Earl 4 жыл бұрын

Outstanding as always. You have reinvigorated my old passion for car audio!

@douglasamadei 4 жыл бұрын

Hi Mark ... I'm from Brazil and I really admire your work .... very clean and with good aesthetics ... unfortunately we didn't find professionals of your level here in Brazil .... Congratulations on your excellent work !!!

@chriscassady6623 3 жыл бұрын

so clean! mad skills i like how you use simple affordable tools and give great detail throughout your videos. Thank you!

@markphilpot4981 4 жыл бұрын

Mark, any video you put out will help anyone who is interested in car audio fabrication and even those who aren’t. Those who watch want to see your how to’s. Your instructions are clear and if the need help, you will answer their questions. The half million mark is only a heartbeat away!

@oryanmackie-smith2423 3 жыл бұрын

Just recently found your stuff appearing on my recommendations and I love your work... Definately going to be sticking around to learn some more techniques for sound system installs etc... I think you explain and show your talents really well... keep up the great work.

@christianbateman4530 4 жыл бұрын

You make wrapping that box look super easy. Great video and its great that you share your knowledge with the world.

@JoseHernandez-tc1kl 4 жыл бұрын

Wow that’s awesome you make it look so easy to make. If I would do one it wouldn’t come out like the one you just did. I respect your work.

@luispauloArq 4 жыл бұрын

After so many projects you have become a master, and it is great to see your beautiful works of art.

@robland6118 4 жыл бұрын

You absolutely do an amazing job man. The enclosure looks great. You pay a lot of attention to detail. I like it a lot. Can't say enough of how good of a craftsman you are!

@larsvegas1505 8 ай бұрын

that said ur better off just buying a 200 dollar premade box.. since getting all the stuff together and making it will cost about 3 times as much.. unless ur already making tonns of them.

@rondamon8004 3 жыл бұрын

Beautiful box, very clean and professional...Great chanel for audio enthusiasts...!!!

@hippo-potamus 4 жыл бұрын

Love your videos mate, you explain everything so well! Fantastic work!

@tsar-bomba2413 3 жыл бұрын

I love your take on basic enclosure design, next level when it comes to design. I'd love to see a competition style build out of you. Maybe hidden amp racks with actuators.. Your designs are always so clean.

@angelthegutarhero 4 жыл бұрын

Im going to build a box like this for a high output subwoofer. Thanks for making it first so that i wont go wrong with building it. Love your channel. Very professional.

@HifiVega 4 жыл бұрын

This is the sickest entry level enclosure ever! Can’t wait for the next video because I’m digging the Anderson connectors.

@CarAudioFabrication 4 жыл бұрын

Thanks for tuning in bro!

@jacksonscott8451 4 жыл бұрын

I have almost the same sub and amp setup with a ported box. I’ve had subs before, but it just sounds so clean unlike my other subs. It sounds good with all types of music! If you’re thinking about getting a setup like this, I would definitely recommend it!

@miller61785 4 жыл бұрын

So glad you added demo's to your box builds!

@LukeTheJoker 4 жыл бұрын

That box came out really nice, looking forward to the next video in the series.

@denseleit 3 жыл бұрын

Absolute master of your craft... Wicked job!!!

@MikeRoe24 2 жыл бұрын

Amazing work I enjoy learning from your videos and getting new ideas on how to do things to my cusom audio build. You are very talented and I appreciate you sharing your knowledge.

@TheLilDwarf 4 жыл бұрын

really love your channel! been suscribed for a week and im EATING your content! new to this car audio world and surpassed my car audio friends in knowledge just by watching your videos! keep it up! :)

@CarAudioFabrication 4 жыл бұрын

Welcome aboard! Thanks for watching

@jerichotm2122 3 жыл бұрын

I'm not particularly interested in building car sub-woofers, but I have watched this video right through the end because what you're doing here is ART! No doubt that proper tools are needed to complete this great job, but it needs much patience and this sense of perfection to accomplish this! Great work! Maybe if you wood like to do a video regarding DiY floorstander enclosures for home ... this will be interesting to watch, and perhaps, trying to do it myself! Or, because the name of this channel is Car audio fabrication, I would like to know how to built a complete audio system for a car... I know that is really tricky!! Again, great work!!!

@StuffWithKirby 4 жыл бұрын

This peaks my interest. Ive been wanting to add a subwoofer to my work van.

@stephendverner 4 жыл бұрын

Building my first sub box. Been doing pro AV for 20 years. Just having fun with some car audio now.

@dougwilson377 4 жыл бұрын

Nice vid... would love to see a single cab behind the seat box build, something where airspace is a challenge

@TJsVette 4 жыл бұрын

I def need those quick disconnects for my van. It would make taking out the system a whole lot easier!!

@LocksmithInTampaFL 7 ай бұрын

Next level build. Thanks for all the details.

@Rick_Dunaway 2 жыл бұрын

Clean and Simple, looks great!

@DjGrahnstettoOffical 4 жыл бұрын

Just a suggestion, could you use a Beta 52 mic or something to record bass to get a better impression?

@DJSHADDY2K7 Жыл бұрын

this build of the car audio speaker box bring tear to my eye very nice.

@publius1776ad Жыл бұрын

Holy cow that was a lot of good information. Thank you.

@rodolfosotelo5929 3 жыл бұрын

Man o mannnn what a beautiful sub box i just discovered your KZfaq channel love the content man keep up the great work

@davidharmon1966 2 жыл бұрын

You truly help the sound of music 🎶 in Auto . Thanks for your dedication..

@MarkoVukovic0 3 жыл бұрын

Excellent build, well done dude!

@DIYAudioGuy 4 жыл бұрын

Nice work as always.

@samisvideo 3 жыл бұрын

Love it, fantastic work!!!

@nanope773 3 жыл бұрын

That's top of the line quality wise! Jl is legendary! Dual or the hand me down no name 12"s you get @ a thrift store or a buddy is entry level! Lol

@chuyvelazquez9970 3 жыл бұрын

Super box . Gracias desde México.

@jayweb702 4 жыл бұрын

JL Audio, classic car audio goodness!

@mikethatguy27 2 жыл бұрын

Looks beautiful my man! I bet it thumps.💯🙌💪

@robjodicarter 4 жыл бұрын

You build such awesome boxes!!! I'm a newbie and I have tried to build a box 3 different times and I cant seem to get it to sound good.its a sundown sa 8v1.5. Built to mfg specs but sounds horrible... thanks for all your great videos!!!!

@grnwhitewidow76239 Жыл бұрын

Your work is amazing !

@ericjorgensen7276 4 жыл бұрын

Nice build looks great nice work. I use the same glue and finish nail gun never had a problem.

@SpaceheadStones 3 жыл бұрын

You are truly a master of the craft!

@jdizzle3740 2 жыл бұрын

So many don't understand what goes into custom box building and why it can be so expensive and time consuming. This is a great video that I think more people should watch before they go to a shop and expect a custom box to be done in an hour and a half.

@Mikiemike0051 3 жыл бұрын

Well, you said you wanted 500k subscribers, I see 522k! Congratulations! I am interested in learning more about box tuning for Hz. Gonna dig through the channel here to see what gem I can find. Thanks for the awesome work! (And sharing it of course!)

@ameanudean6694 4 жыл бұрын

Mighty clean!!

@truckguy9413 4 жыл бұрын

Amazing work. Love your videos.

@CarAudioFabrication 4 жыл бұрын

Thank you! I see you have been subscribed for three years, much appreciated !

@darren7650 4 жыл бұрын

Nice build Mark. YES, I’d love to see an amp/sub combo box with quick disconnects. I need that for my(wife’s) new Nissan Rogue.

@CarAudioFabrication 4 жыл бұрын

Coming soon!

@alamarij 3 жыл бұрын

You rock! yes you actually do! I've been flipping throu your channel in the last 2 days or so.... and yes you rock!

@oddhelgeb8560 2 жыл бұрын

where art meets craftsmanship. Premuim that is !!

@johnsmith-qz4bv 3 жыл бұрын

looks great nice work

@traktion9 4 жыл бұрын

Entry level subwoofer build......slot port....with double baffle....double bracing.....corner 45s....front insert.....ya sounds pretty entry level to me.

@CarAudioFabrication 4 жыл бұрын

The subwoofer is entry level. Everything you mentioned can be done with basic tools and some pride.

@flanigas 4 жыл бұрын

@@CarAudioFabrication Specs for that sub may be "entry Level" but the price sure isn't. $230 is nowhere near entry level. JL does make nice sounding stuff but you are definately paying a premium for the name.

@GahhDamnAlex 4 жыл бұрын

@@flanigasFor the same RMS power rating and a low price, you can also look at the Skar Audio IX 12. It is only 50 dollars and it sounds great. I had the IX 12 for a year and it is still slapping. PS. The IX series from Skar Audio is their entry level sub.

@roadlife9312 4 жыл бұрын

You do some awesome work. Always learn something..really enjoying the box you design for me..

@CarAudioFabrication 4 жыл бұрын

Glad to hear it! Thanks for watching, and being subscriber a year!

@roadlife9312 4 жыл бұрын

@@CarAudioFabrication yep that's about howl long it took me too finish 🤣🤣 THANKS FOR ALL YOU DO!

@elijahevangelista3772 3 жыл бұрын

Man your a legend..your job is superb.. new subcriber here in the philippines😆

@DGALVIN45 11 ай бұрын

We need a build video on your stereo system powering the amp and sub. Love the content brother, as always 💯

@rlg222 4 жыл бұрын

I sure do miss building speaker enclosures. I like your videos.

@brianbrown3065 Жыл бұрын

Wow. Just wow. Can't believe your level of skill man. You are frickin amazing! Nice work. Damn I'm jealous lol

@74midwestbass74 4 жыл бұрын

NICE!!!

@evankaiser5767 3 жыл бұрын

Love the tutorials. Could you consider a tutorial on a under sub box using fibrglass and factory undersear storage? For example Ford Ranger px2 space cab rear seat, Thanks afain for the tutorials.

@jprock73 4 жыл бұрын

Awesome build!

@CarAudioFabrication 4 жыл бұрын

Glad you think so!

@lowridingtrucks88 3 жыл бұрын

I'll subscribe, you made great info👍

@DJSHADDY2K7 Жыл бұрын

Very nice 👌

@informational201 4 жыл бұрын

Awesome bro I love you bass

@jikushiaromotojng6206 4 жыл бұрын

Nice job men 💪💪💪💪💪💪

@Robertb00 4 жыл бұрын

Entry level is some OSB, drywall screws, and liquid nails. I’m no JL audio fanatic but I have had great results even with the W0 12 in a small stealth fiberglass enclosure I built for a Camaro.

@CarAudioFabrication 4 жыл бұрын

No its not, thats just someone who is not educated in how to properly build a box. Nothing wrong with the screws approach but with a little research people would find that MDF and proper wood screws are a better choice.

@Robertb00 4 жыл бұрын

There was no disrespect intended, for me in the mid 90’s that what I started with. You have the best tutorial videos and show how to get professional results with proper planning and education.

@jeffwaicak8704 4 жыл бұрын

I'd have run particle board. But yes spot on. Now I run MDF wood glue and drywall screws

@bigdaddya735 3 жыл бұрын

Nice trick to mark out a circle...👍

@mariofarrugia7455 4 жыл бұрын

Hey i love your video, SUPER informational, i was designing a box trying to perfect the airflow but after watching.. I've realized i have bit of ALOT more then i can chew, i used to run that same JL sub but i now have the Alpine's SWR-1242D 12" and R-W12D4 ( Killer haha ) to soon be powered with the Audio DM2500a monoblock, (dual battery and isolator with capacitor), i was intending on making the port start at the back of it as it comes up and over the top via slim port, but after seeing your setup wrap around, I'm so lost in how to make something like that and have to perform to its peak (cubic inches inside the box i didn't think of optimizing its performance, something i didnt think of with all my sketches) i have a EK 99 Civic hatch (Almost type R Civic with type R subs 😜), i was wondering if you may have any advice on what i should really be doing and making for these subs to get my boot popping off its hinges 😂

@chr1st14n3d 3 жыл бұрын

Hello i've been watching some of your videos lately and it is very informative especially for beginners like me, but i'd like to see on how to install a template or layout for car trunk panel. Thank you so much.

@johncochrane2667 3 жыл бұрын

Hi Mark! I would kill to be as skilled as you, but I'm working on it! I don't know if this has been answered before, but I noticed you don't use terminal cups on your boxes. I saw you use some sort of "grommet" port for the speaker wire to exit the box. What is that peice exactly, and would it work for a sealed box application as well? Thanks for this and all the knowledge you have shared over the years!

@DAVIDDTHEDUDE 2 жыл бұрын

Great video and build, as usual! Where did you get that mini pry bar? looks like a nice tool

@iamkustom 4 жыл бұрын

Hello I've been watching your videos for a while this my first time adding a comment, can you if you haven't already done a video on how to do the male and female pieces, I'm starting to buy tools from Mobile Salutations can you give a list of what tools are needed from them just to start off thanks and keep up the good work 💪

@eduardogomez6274 4 жыл бұрын

Nice!!!!!

@kylefite6630 3 жыл бұрын

Dude I've been binge watching your videos and I LOVE your work! I have a question you might be able to answer. I want to make a stereo for my shop. You made yours with a head unit. I want to make one with component speakers and an internal board just for Bluetooth. I found everything I need but I'd like to be able to hook up an outboard sub like a JL in it's own box. With 2 tweeters, 2 mids and an outboard sub I'd want a 4 channel amp right?

@josemacon7385 4 жыл бұрын

Definitely would like to see a video of the different braces you use in your builds and how you determine the size of them!

@CarAudioFabrication 4 жыл бұрын

New video about window braces just dropped: kzfaq.info/get/bejne/nNyAeKiGmqmUYac.html

@johnsmith-qz4bv 4 жыл бұрын

great video

@alverkoro435 2 жыл бұрын

Thanks for the well-detailed video, just have a question, the manufacturer recommendation was 25 in x 15.5 in x 13 in why you used 30x15x13. Thanks.

@AdamYarris 4 жыл бұрын

I'm just starting on making a little dual amp rack for my system (inspired by your stuff), and I'm _very_ tempted to get a second sub and making a box for them. Damn you, mark!

@CarAudioFabrication 4 жыл бұрын

Always a fun project to build more stuff!

@AdamYarris 4 жыл бұрын

@@CarAudioFabrication Well I can't deny that

@jackpearce2645 4 жыл бұрын

Does anyone know how he attached the vinyl trim pieces to the box?

@projectcrowdsurfer3732 4 жыл бұрын

If I have 2 15 inch subs and the recommended cubic ft. Is 3.75 for each sub do I double that for the enclosure size?

@MrShiffles 4 жыл бұрын

I always enjoy watching you build works of art out of common materials that function beautifully! One question: isn't W0 considered entry level? I wouldn't think of W1 as entry level, considering the price is out of range for alot of people just starting out...

@CarAudioFabrication 4 жыл бұрын

I consider the W0 to be "budget". To me entry level means you are serious about getting into the hobby and willing to invest a little, but not looking to obtain the best high end gear.

@MrShiffles 4 жыл бұрын

@@CarAudioFabrication ok that makes sense...i always tended to associate "budget" and "entry level" as the same thing...thanks for the clarification and keep doing what you do! I've learned quite a few little tricks from time to time watching your videos...Cheers! \m/

@jmac1013 4 жыл бұрын

Subscribed. Great content.

@CarAudioFabrication 4 жыл бұрын

Thank you

@garyseymour6319 4 жыл бұрын

Have you ever done a rear parcel shelf bass build? If not why not? Also what kind of power do you use in your Sub builds as them wires are MASSIVE!!!!

@MrMasterDin 4 жыл бұрын

If you use a heat gun carefully, you can knock down any stray trunk liner fuzz. Love the content!

@giorgiolimblici8240 4 жыл бұрын

What do you tink of the Hertz DBX 30.3? For me it's the First build and I feel uncounfortable making the sub myself

@denzilvarghese 3 жыл бұрын

Recently I've purchased the Ported single 12" design from the website for Rockford Fosgate P2D4 12". However I changed my mind and thinking of getting the T1D2 12", will it be recommended to use the same enclosure for this model ??

@johnathansmith1373 3 жыл бұрын

Maybe I missed it- is friction all that holds in the decorative panels? I model cnc parts in Fusion 360. If I commission a design do you also send a model or is everything only 2d? I have a shapeoko and though it might be easier to cut some features on the cnc? Thanks

@VictorRodriguez-rd5xl 3 жыл бұрын

Wow, that's what I call professional job...You make it look easy or like making art not work 😆👍, thanks for sharing w/ us novices. I always learn something from ur vids, thank you! God Bless...

@CarAudioFabrication 3 жыл бұрын

Appreciate it, thanks for tuning in

@jamiethomasnaylor845 4 жыл бұрын

Do they make a rebuild kit for the JL Audio 13 tw5 2.2

@ahmedmegalli484 Жыл бұрын

Super like 👏

@timothy5977 Жыл бұрын

Man, if I had access to videos like this back in 2000, I would have stayed in the audio industry.

@robertobryant1732 3 жыл бұрын

I have a 2018 jeep JL soft top I want 2 12s for deep bass and volume so what will be the best box

@lassediscovers1813 4 жыл бұрын

Nice buildt and looks! Do you use a mask when cutting mdf btw?

@flipsidefishin7822 3 жыл бұрын

What table saw are you using? I love it!

@SlowZX2 3 жыл бұрын

I bought one DS18 SlC-12S which handles 250W RMS and peaks at 500w rms... what amplifiers would you recommend?

@JosephOlar 4 жыл бұрын

You asked if to mount the power amp to the box well it all depends on the vehicle. Can the amp be tucked away and just have the cable to the speaker. How about a quick latch or tie down for the speaker box to make sure it secured to the floor of the vehicle. Cheers

@marsrover001 4 жыл бұрын

I'm that next video, could you talk about mounting the amp to the box and if you believe the vibrations will affect amp lifespan. I personally keep my amp mounted separately for this reason. Not to mention in many cars you can hide the amp very well and just use connectors like the speaktron to allow easy box removal. I just don't see or understand the need for amp removal.